介绍了汽车检测线智能化控制系统的设计方法。
This paper introduces the design method of an automobile test production line's intelligent control system.
同时便于实现自动化控制，若采用智能化控制系统易于实现自动化生产。
Meanwhile easily to achieve automatic control, and when using the intelligent control system, easily to implement automated production.
控制策略：当车间图表创建后，一个控制策略就需创建来智能化控制系统。
Control strategy After the plant schematic has been created, a control strategy may be created that provides the controller with the intelligence to handle the system.
采用智能化控制系统自动调节滚筒高度及牵引速度，使采煤机负载趋于平滑。
The drum height and haulage speed both are adjusted automatically by using intelligent controlled system to make the load of cutter smooth.
采用大屏点阵液晶显示及智能化控制系统。并且有良好的中英文人机对话界面。
Adopt large lattice LCD screen and intelligentized controlling system, also has good English and Chinese language man-machine conversation interface.
采用大屏点阵液晶显示及智能化控制系统。并且有良好的中英文人机对话界面。
Adopt large lattice LCD screen intelligentized controlling system, also has good English Chinese language man-machine conversation interface.
以上这些关键技术问题的解决为开发振荡压路机的智能化控制系统奠定了坚实的基础。
Above the key technologies solved will lay the solid foundation for intelligent compaction control system of oscillatory roller to be studied.
汽车检测线智能化控制系统能实现尾气、噪声、灯光、侧滑、轴荷、制动等工位数据的自动采集控制。
The control system can realize working sites data automatic gathering and control of exhaust gas, noise, headlight, side slip, axle load, brake, etc.
本研究的未来成果可作为下一步研究过程综合自动化系统的一个基础台阶，也可作为适应于高智能化控制系统的一个设计和应用平台。
This research can be a basic step for the next investigation on the synthesize automatizing system, also as a Design - and -application flat roof suits for high-intelligent controlling system.
智能化：带有压实控制系统及一个实时对在动态压实下面的土壤状况进行反应的系统。
Intelligence: With compaction control and a system that reacts instantly to the behaviour of the soil under dynamic stress.
该文提出了建立具有分布式结构的基于CAN总线的温室控制系统模式，可以降低成本，为解决温室控制系统智能化问题提供了有效的途径。
The idea of distributed structure of greenhouse control mode based on CAN bus could decrease cost and also provide a valid way to solve its intelligent problem.
论述了智能化电器控制系统的可靠性设计和抗干扰技术的重要性和必要性。
Reliability design and anti interference technique of intelligent electrical apparatus control system and its importance were introduced.
根据国家消防有关规范和现代智能化建筑工程要求，介绍了火灾自动报警控制系统的联动关系及工作流程。
According to national fire defense regulation and the demand of modern intelligent building, it also introduces the linkage relation and work flow of automatic fire alarm control system.
设计机构单独测试、机构故障自诊断，机构故障自恢复等智能化控制功能，提高锡膏印刷机控制系统的稳定性、可靠性。
Provide device separate test, fault diagnose, system self resume and some other functions to improve the stability, reliability and automatic control intelligence of stencil printer.
智能开关柜能满足工业控制系统分散化、网络化、智能化的要求。
The designed intelligent switchboard satisfies requirements of the industrial control system for decentralization, network and intelligence.
全电脑人机智能化、菜单模式控制系统。
Computerized human-machine intelligent, menu mode control system.
人工心脏的控制系统也达到了智能化。
因此，开发符合生产需要的智能化、数字化的阀门控制系统具有很大的现实意义。
So it is significant to develop intelligent and digital valve control system which is suitable for production requirement.
本文介绍了智能化家居控制系统的网络结构、硬件研制情况和软件结构、流程、使用方法。
The thesis introduced the hardware development of the intelligent residence control systems and the software structure, flowchart and application.
论述了智能化电器控制系统的可靠性设计和抗干扰技术的重要性和必要性。
The importance and necessity of reliability design and anti - interference technique in intelligent appliance control system are presented.
在交通控制系统管理中，交通事件的自动检测是目前最具代表性的智能化管理手段。
In the traffic control system management, traffic incident automatic detection is the most representative intelligent management means.
传感式智能开关控制系统是传统开关控制器的智能化，可视为虚拟开关机器人。
The Sensor-Based Intelligent Switch Control System is based on traditional Switch Controller, and can be regarded as Virtual Switch Robot.
回路过程控制器是分布控制系统中散度可达到一个回路的智能化仪表。具有可靠性高，功能强，灵活性好等特点。
Circuit process controller is an intelligent instrument witch divergence in distributed control system can reach one loop, with the property of high reliability, rich function and well flexibility.
本设备采用进口plc触摸屏控制系统，实现智能化、人性化管理。
The equipment imported PLC touch screen control system, the realization of intelligent, user-friendly management.
实践证明，该方法是可行的，可以使PLC控制系统的设计实现智能化、自动化。
Practice has proved, this method is feasible, can make the design of PLC control system intelligent, automatic.
为提高型钢尤其是复杂断面型钢连轧时机架间张力的控制精度，研究了一种智能化微张力控制系统。
A kind of intelligence micro-tension control system has been studied to especially improve the control precision of tension between stands for complicated section continuous rolling.
网络控制系统具有结构网络化、节点智能化、控制现场化、功能分散化、系统开放化和产品集成化等特点。
The network control has many characteristics, frame network of node, intelligence of node, locale of control, decentralization of function. dispark of system, integration of product, and so on.
将人工智能技术引入到AGC带钢厚度控制系统中可使控制系统具有智能化，提高带钢厚度的控制精度。
The control system will be intelligent by introducing artificial intelligence technique into AGC strip steel thickness control system to increase control accuracy of strip steel thickness.
阐述了智能照明控制系统的设计现状，给出了目前智能照明控制系统智能化程度低下、操作僵硬，并且节能效率不高的特点。
Current status of design in intelligent illumination control system was described, and the disadvantages of low intelligence, ossified manipulation and low efficiency of energy saving were brought up.
并在原有微机控制系统的硬件基础上，构成智能化车载诊断系统。
And on the basis of the original microcomputer control system, the intelligent vehicle diagnosis system has been formed.
应用推荐