系统控制器连接到船员的背心，由PV35显示控制模块提供。
The operator controller is attached to the crew member's vest, and is provided by the PV35 Display Control Module.
屏幕显示方向、桌面切换、甚至是游戏控制和实时的笔记本倾斜度3D模块现在都已经可以使用了。
On-screen display orientation, desktop switching, even game control and real-time 3D models of the tilt of the laptop are now available.
缺省控制台将各个模块的这些操作显示为灰色。
The default console displays these operations grayed out for various modules.
单片机数据处理之后，发出控制信息改变报警和控制执行模块的状态，同时将当前温度信息发送到LCD进行显示。
It can send a signal to change the states of alarm and implementation module, current temperature is displayed by LCD. The system achieves multi-channel temperature signal acquisition and control.
第14幅图显示了控制模块和在这次调查里的试用工具。
Fig. 14 shows the control modules and test kits designed in this research.
启动控制台显示了一系列载入和启动的模块、连接器和应用程序，Geronimo运行时环境就在这些对象中创建。
The startup console shows a number of modules, connectors, and applications that are loaded and started, and from which the Geronimo runtime environment is created.
在建立Geronimo运行时环境时，启动控制台将显示装入和启动的模块、连接器和应用程序。
The startup console shows modules, connectors, and applications that are loaded and started as the Geronimo runtime environment is established.
启动控制台将显示装入和启动的许多模块、连接器和应用程序并从中创建Geronimo运行时环境。
The startup console shows a number of modules, connectors, and applications that are loaded and started and from which the Geronimo runtime environment is created.
主要其结构包括传感检测模块，单片机信息处理模块，数据显示模块和反馈控制等模块。
Its structure, including the main sensor detection modules, single-chip information processing module, data modules, and modules such as feedback control.
软件部分，进行了数据采集、数据处理、实时控制、显示、串口通讯等模块的设计。
On the software part, data sampling module, data processing module, real time control module, display module, keyboard response module are designed.
基于80c 196MC芯片的无刷直流电机控制系统，包括80c 196 MC、IPM、速度显示及速度设定模块。
The control system for the brushless DC motor based-on 80c196mc consists of 80c196mc, IPM, speed displaying and speed setting module.
包括单片机控制、电源、传感器、油量报警、油量显示、车速信息、里程信息、LED显示等模块设计和软件的设计。
It consists of MCU control, power, sensor, oil amount warning, oil amount show, LED display and the software design.
本文所设计的正弦信号发生器主要由DDS波形产生模块、单片机控制模块、键盘输入模块和数码管显示模块组成。
This system consists of DDS signal generator module, MCU control module, keyboard input module and nixie tube display module.
在电子产品设计中，显示模块往往是作为主控制器的一部分来控制的。
In the electronic product design, display module is often controlled by main controller of the product.
利用软件工程中的结构化思想将虚拟式音频分析仪的设计分为采集、分析、显示、辅助及控制共五个部分，并分别以软件模块的形式加以实现。
Using structurization thought in software engineering, the design of virtual audio analyzer is divided into five parts, which are data acquisition, analysis, displaying, auxiliary and control.
其控制方式为间接控制，即P 89c 669通过自身系统中的并行接口与显示模块连接。
Its control manner is indirect control manner, that is, the P89C669 connected with display module by using parallel interface.
在本课题中按照控制电路的功能模块分别编制了采样、计算、显示、中断等函数，而在主程序中分别调用这些函数来实现相应功能。
To meet the control circuit's requirement, the function of sampling, calculating, displaying and interrupting is written separately and is called in main programme.
系统在硬件结构上分为控制、驱动、电源、显示、电压转换五大模块电路，各电路板之间采用磁耦进行隔离。
The system hardware architecture is divided into control, drive, power supply, display five blocks circuits, and magnetic coupling is used to isolate circuit boards.
设计分为3个模块：控制模块，数据处理模块和显示模块。
Design is divided into 3 modules: the control module, data processing module and display module.
设计了下位机控制单元的实现方案，包括外部扩展的显示模块(LED)、红外遥控模块、通信模块等的设计方法。
Design the realizing methods of controller unit, including LED display module, communication module, infrared remote controller module, etc.
重点阐述了数据采集、触发控制、显示控制几个主模块的设计方法。
The designs for several main modules such as data acquisition, triggering control and display control were chiefly expounded.
其中硬件电路包括键控制模块、显示模块、输入信号整形模块以及单片机和CPLD主控模块。
Hardware circuit includes key control module, display module, plastic module of input signal, single chip computer control module and CPLD main control module.
系统主芯片采用EP1K100 QC 208 - 3，由时钟模块、控制模块、计时模块、数据译码模块、显示以及报时模块组成。
The main system chips used EP1K100QC208-3, make up of the clock module, control module, time module, data decoding module, display and broadcast module.
本文以内藏液晶显示控制器（T6963C）的液晶显示模块为例，介绍了其在DSP测控系统中与DSP芯片（TMS320C542）的软件和硬件接口形式。
The article takes the LCD module of T6963C controler with built-in LCD for example, presenting its software and hardware interface with DSP(TMS320C542) in DSP application.
通过T6963 C控制器的液晶显示模块在医用分析仪器上的使用实例，比较了使用该控制器的液晶图形模块时的不同硬件接口形式。
With the examples of use in medical instruments about LCD display module based on inner T6963 controller, two diverse hardware interface forms when using the controller were discussed.
软件设计可分为三个模块：数据通信、数据计算以及仪器面板控制和结果显示模块。
The design of software includes three modules: data communicate module, data calculate module and the instruments panel module used to accepting the command and to displaying the result.
介绍了智能压路机的研究现状，提出了智能压路机控制系统组成方案，着重设计了显示器模块中人机交互软件。
This paper introduces the present status of intelligent road roller and puts forward the control sys - tem plan of intelligent road roller, which consists of control module and display module.
用硬件描述语言VHDL对可编程器件FPGA进行功能模块设计、仿真综合，可实现VGA控制器显示各种图形、图像、文字等。
The design of functional module and simulation and synthesis based on FPGA by using VHDL can be realized on VGA Controller, which can display the figure, image, character and the like.
应用FPGA技术实现了对RT12864M汉字图形点阵液晶显示模块的驱动和控制。
The RT12864M is driven and controlled with FPGA technology in order to realize the manifestation of Chinese characters.
智能涡街流量计系统由涡街传感器、温度传感器、压力传感器、液晶显示模块、主控制器等几个部分组成。
The intelligence vortex flowmeter system is consisted of vortex sensor, temperature sensor, pressure sensor, LCD module and master controller, etc.
应用推荐