该仿真系统能够方便地对参数进行设置修改，直观地显示仿真结果，有利于对光测设备跟踪性能进行评价。
The parameters of simulation system can be easily modified and the simulation results are shown directly, these make the tracking effects evaluation of optical measurement device easily.
在这一点上，您可以要求枚举设备，显示此PD P - 15的各种仿真的设备(浮动点处理器、纸带读取器、纸带打孔，等等)。
At this point, you can request that the devices be enumerated, which shows the various devices simulated for this PDP-15 (floating-point processor, paper tape reader, paper tape punch, and so on).
它涵盖了控制和工程学方法的自适应，仿真功能，决策制定支持以及产出和分析的图形显示。
It covers the adaptation of the controlling and engineering methods, simulation function, decision-making support and graphic ability of production and analysis.
仿真的结果表明，黑洞是和星系一同成长的，一些观测结果甚至显示一些含有活动星系核的星系有轻微的扭曲，这是近期发生碰撞的标志。
Simulations have found that black holes and galaxies grow together. Some observations even suggested that galaxies with active galactic nuclei were slightly distorted, a sign of a recent collision.
该视景仿真系统无论从场景的显示和更新速率上、还是在视景的实现功能和对油轮实时操纵的效果上都是比较成功的。
The visual simulation system is very successful not only from the point of scene display and updating speed, but also from the point of scene function and the effect of driving oil tanker.
本系统使用内存拷贝技术对显示信号进行动态刷新，使仿真过程更接近侦察系统的信号实时分析。
The simulation process is similar to real time signal analysis of practical reconnaissance system by means of memory copy technique which refreshes display signals.
仿真应用结果显示，基于此优化方法的智能多代理系统服务时间比优化前平均缩短20%，有效地提高了系统服务质量。
The simulation results show that system's average service time under this kind of optimization method is 20% shorter than other ways, it gets obvious optimization effect.
仿真结果显示了QMRA在状态信息不精确的情况下，具有较低的路由阻塞率和数据包的平均延迟，并且能够快速收敛。
Simulated results show QMRA achieves not only a low routing blocking ratio and a low average packet delay, but also a fast convergence, while the network state information is imprecise.
研究了一种采用网络分布计算，具有三维动态显示、实时操纵和人机闭环的无人机虚拟遥控仿真系统。
Simulation of a remote control system of unmanned aircraft with network distributed computing and three dimensional dynamic display and man in loop real time operation is studied.
仿真结果显示，自然梯度算法比传统梯度算法收敛速度更快，分离效果更好。
Simulation results show that the natural gradient approach has faster convergence speed and better separation performance than the conventional gradient based algorithm.
最后，用数值优化中的三个测试函数对该算法进行测试，仿真实验结果显示该算法可有效地提高算法的全局搜索能力。
Finally, the algorithm is tested by three test functions of numerical optimization. The emulational experiment results show that this improved algorithm has greater probability of convergence.
建立其数学模型，并进行计算机仿真验证，其结果显示出该方法可以有效地提高目标的位置精度与可靠性。
A mathematical model is established and validated with computer imitation. The results show that the method can effectively improve accuracy of object position and reliability.
建立其数学模型，并进行计算机仿真验证，其结果显示出该方法可以有效地提高目标的位置精度与可靠性。
Mathematics model is established, and verified by the imitation of computer. The results show that the method can effectively improve the accuracy and reliability of the position.
仿真结果显示，运放开环与闭环时的频率响应、输出饱和、转换速率等特性得到了真实的反映。
The simulation results show the open-loop and closed-loop frequency responses, output saturation, and the slew-rate of operational amplifier are truly reflected by this model.
仿真实验显示，在网络连接度为8、参考节点数量为20的情况下，平均定位误差小于节点射频通信距离的21%。
Simulations show that average positioning error less than 21% of nodes' radio range in a scenario where an average connectivity is 8 and anchor nodes is 20.
数控加工图形仿真技术利用计算机图形显示来模拟实际加工过程，是验证数控加工程序正确性的有力工具之一。
Graphics Simulation technology in NC machining is a powerful tool for validating NC machining programming, which using the computer graphical output to simulate the real machining process.
结果所有受检椎管均成功进行CT仿真椎管镜成像，MSCT VEVC像清楚显示相应正常骨性椎管及病理改变的管内表面情况。
Results MSCT-VEVC were performed in all cases successfully, which could display structures of the normal bony vertebral canal and inner surface of the lesions on the bony vertebral canal well.
仿真结果显示该路由协议在平均分组递交率和路由协议开销等方面要优于传统路由协议。
The simulation results indicate that the performances of the protocol in packet delivery ratio and routing overhead are better than the conventional routing protocol.
仿真结果显示，复合余弦基神经网络图像去噪滤波器各项特性接近理想滤波器。
The simulation results reached nearly ideal filter characteristics, and the performance of removing image noise using this filter was compared with the median filter.
对请求排队的普通模型进行了数学分析，给出了采用不同策略时的计算机仿真结果，显示了混合策略的优越性。
Then, a common model for the request queue is analyzed in mathematics and the computer simulation results of the different admission strategies are given to show the advantage of the hybrid strategy.
最后以自适应噪声对消系统为例，进行了计算机仿真，结果显示了这种滤波器的良好性能。
Finally, an adaptive noise cancelling system is designed as an example and the computer simulation results show the superior performance of the adaptive neural network filters.
仿真结果显示，此法能够良好地抑制动态伪轮廓，并且有助于克服单纯延伸编码显示灰度级不足的缺点。
Simulation results show that this method can greatly reduce dynamic false contour and overcome the shortcoming of insufficient gray levels in pure stretched-out coding display.
仿真实验显示，本章提出的五种检测器算法的误码率均远低于已有的解相关、最小均方误差和多级多用户检测器。
Our simulation experiments show that the bit-error-ratio (BER) of these new detectors is much lower than that of decorrelation, minimum mean-squared error and multistage detectors.
仿真结果显示密文分布更合理，编码时间更短并且编码时间与文本文件的大小呈线性关系，增强了该算法的实用价值。
Simulation results show that the distribution of the ciphertext is flatter and the encryption time is shorter, the encryption time increases linearly with the file size, which made it more practical.
在悬臂上进行最优控制的数值仿真结果显示该最优控制方法能充分利用控制作动器迅速抑制结构振动。
The optimal control law was simulated for a cantilever beam with the results showing that with the cable actuator, the structural vibrations were rapidly attenuated.
仿真结果显示，该方法在迭代次数很小时性能便可接近带有循环前缀的STBC - OFDM系统。
Simulation results show that the performance of this method approaches that of the STBC-OFDM with cyclic prefix even if the number of iteration is very small.
对于铣削力引起的加工变形，在加工水平中分面时，将铣削力分别施加到轴承端和导流端，仿真结果显示，铣削力不会引起过大变形；
When milling horizontally middle plane, by applying milling force to bearing end and steam guidance end, simulation results showed no excessive deformation arose.
仿真结果显示，采用神经网络半主动控制能取得很好的减振效果，证明该方法是可行的。
Simulation results show that the excellent effect of mitigating cable vibration can be acquired with the neural network approach of semi-active control and that the approach is feasible.
仿真结果显示，采用神经网络半主动控制能取得很好的减振效果，证明该方法是可行的。
Simulation results show that the excellent effect of mitigating cable vibration can be acquired with the neural network approach of semi-active control and that the approach is feasible.
应用推荐