原子力显微镜扫描对醛基化玻片表面形貌进行分析。
Scanning aldehyde group glass slide by atomic force microscopy study the surface shape.
用光学显微镜观测和分析电火花线切割硅表面沿纵向分层择优腐蚀后的形貌；
The surface morphology after preferential corrosion along the vertical orientation was observed via an optical microscope.
用X射线衍射仪（XRD）对膜层的化学组成及结构进行了表征，用扫描电子显微镜（SEM）对膜层的形貌进行了分析。
The chemical composition and micro-structure of the coating were examined with XRD and the morphography of the coating was analyzed with SEM.
采用光学显微镜、扫描电镜等分析手段，对45钢大齿轮传动轴断裂表面的金相组织、断口形貌进行了分析和检测。
The metallurgical structure and fracture morphology on gear transmission shaft of 45 steel were analyzed by means of optical microscope and scanning electron microscope.
使用扫描电子显微镜（SEM）和能谱分析（EDS）等观察分析磨损钢球表面的磨痕形貌、化学元素和纳米粒子形态。
The surface morphology of wear scar, nanoparticles and its element distribution have been tested and analyzed by scanning electron microscope(SEM) and energy dispersive spectrometry(EDS).
采用X射线衍射（XRD）、透射电子显微镜（TEM）分析手段对样品的物相、结构、形貌进行了表征和分析。
The sample's crystal phase, structure, morphology and the reaction process were characterized and analyzed by using X-ray diffraction(XRD), transmission electron microscopy(TEM).
用俄歇电子能谱(AES)、扫描电镜(sem)和原子力显微镜(afm)对薄膜的组成成分和表面形貌进行了分析。
Auger electron spectroscopy (AES), scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used to analyze component and surface morphology of the films.
用金相显微镜、扫描电镜和能谱观察和分析了转炉生产的含硫非调质钢轧后硫化物夹杂的形貌。
The morphology of sulphide inclusions in sulphur-comprising micro alloyed steel manufactured by converter after rolling was observed.
对断裂起重机吊具zg270- 500铸钢的化学成分、硬度、显微组织、断口形貌等进行了检测和分析。
The chemical composition, hardness, microstructure and fracture morphology of ZG270-500 cast-steel of cracked lifting instrument were detected and analyzed.
对45钢连接螺栓断裂件的显微组织、断口形貌、硬度和抗拉强度进行了观察分析和测试。
The microstructure, surface fracture morphology, hardness and tensile strength of the failed 45 steel connecting bolt were analyzed and tested.
通过观察断裂风机轴裂纹宏观和微观形貌，检验化学成分、显微硬度等方法对风机轴断裂的原因进行了分析。
Fracture analysis of the fan shaft was made by observing macroscopic and microscopic appearances of the crack, and examining micro hardness and chemical composition of the material.
通过扫描电子显微镜对热镀锌钢板镀层表面麻点缺陷的表面和断面形貌进行了观察，并对其进行了能谱分析。
The surface and cross-section of the pock flaws which appeared on the hot-dip galvanized coating were observed and analyzed by using SEM and energy spectroscopy.
对断齿齿面的宏观特征、微观形貌、显微组织和渗层深度进行了观察、测试与分析。
The macro characteristics, micro morphology, metallographic structure and carburized layer depth of the fractured teeth were observed and analyzed.
利用体视显微镜和扫描电镜对几种常见金属材料的浆体冲蚀、腐蚀形貌进行了低倍和高倍的观察分析。
Stereomicroscope and SEM were used to observe and analyze slurry erosive-corrosion surface topography of some commonly used metallic materials at low and high magnification.
用扫描电子显微镜和X射线光电子能谱仪观察分析了磨损表面形貌和元素化学形态。
Worn surface morphology and element chemistry configuration of steel ball were analyzed by means of X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM).
利用原子力显微镜(afm)、扫描电镜(sem)和光学显微镜观察分析了硫化亚铁喷涂层的表面、截面与磨面形貌。
AFM, SEM equipped with EDX and optical microscope were employed to observe and analyze the morphologies of the surface, cross-section and wear scar of the coatings.
用金相显微镜、扫描电镜和能谱观察和分析了转炉生产的含硫非调质钢轧后硫化物夹杂的形貌。
The morphology of sulphide inclusions in sulphur-comprising microalloyed steel manufactured by converter after rolling was observed.
采用体视显微镜、扫描电镜等分析手段对K18合金增压器涡轮铸造叶片的断裂形貌与断裂机制等进行了分析。
By means of stereomicroscopy and scanning electronic microscopy (SEM), the fracture mode and mechanism of the broken K18 superalloy cast blade in a supercharger turbo were investigated.
测绘了切削温度、后刀面磨损量与切削时间或切削速度的关系曲线，分析了刀具前、后刀面显微磨损、破损形貌和化学变化。
Cutting temperature, relation curves of wear with cutting time and cutting speed, microscopic features and chemical changes of rack face and rear face of the tin coated tool were measured.
采用等离子喷涂法制备了钽金属涂层，用电子显微镜分析了不同工艺条件下钽涂层的化学成分、表面形貌，测试了涂层与基材的结合强度。
Ta coating was prepared by plasma spraying, which composition and morphology were investigated using SEM, also the bonding strength between Ta coating and Al substrate was tested.
此外，采用不同方法制备了多孔硅样品，分析了其表面形貌并用显微拉曼光谱法测定了导热系数。
Furthermore, different porous silicon samples were prepared, and whose surface morpho - (logy) analysis and thermal conductivity measurement using micro-raman technology were performed.
采用扫描电子显微镜观察分析了复合材料磨损表面形貌。
The worn surfaces of the composites were observed on a scanning electron microscope.
采用能量色散x射线谱(EDS)分析得出涂层成分，利用扫描电子显微镜(SEM)观察涂层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS). The morphology of the coatings was observed by scanning electron microscopy (SEM).
利用扫描电子显微镜对微细化淀粉的颗粒形貌进行了分析比较。
The micronized starch granular was analyzed and compared through Scan Electron Microscope.
通过光学显微镜对薄膜晶核发育过程和形貌进行了详细的分析。
The nucleation and surface morphology of ZnO films were observed with optical microscope.
采用扫描电子显微镜(SEM)观察表面腐蚀形貌，XRD进行腐蚀产物分析。
Surface morphologies were observed by scanning electron microscopy (SEM), and X-ray diffraction (XRD) was used to analyze the crystal corrosion products.
采用能量色散x射线谱(EDS)分析得出镀层成分，利用扫描电子显微镜(SEM)观察镀层形貌。
The compositions of the coatings were analyzed by energy dispersive X-ray microanalysis system (EDS), and the morphology of the coatings was observed by scanning electron microscopy (SEM).
运用扫描电镜（SEM）和偏光显微镜对共混物的冲击断口形貌以及结晶情况进行了观察与分析；
The morphology and the crystallinity of the blends were studied with SEM and polarizing microscope respectively.
运用扫描电镜（SEM）和偏光显微镜对共混物的冲击断口形貌以及结晶情况进行了观察与分析；
The morphology and the crystallinity of the blends were studied with SEM and polarizing microscope respectively.
应用推荐