求解生存时间的上限是无线微传感器网络生存时间优化过程中的重要环节。
It is a very important tache for the survival time optimizing process of wireless micro-sensor to solve the upper limit of survival time.
本文介绍CPU性能优化的方法，并提供经过时间验证的步骤，可以帮助您完成整个优化过程。
This article covers the methodology for CPU performance tuning and provides you with time-tested steps that assist you throughout your tuning process.
除了简化网站优化过程外，这个API还简化了公司进行内部测试的过程，减少了优化所需的成本和时间。
In addition to simplifying the site optimization process, the API might also make it simpler for companies to conduct in-house testing, reducing both the cost and time of optimization.
结果，HighPerformance Unload可以并行执行卸载和加载过程，这优化了时间和资源。
As a result, High Performance unload performs the unloading and the loading processes in parallel, which optimizes time and resources.
了解引导过程的时间花在何处是优化它的第一步。 这个 新的内核跟踪选项 提供了测量和改进Linux 引导时间的方法。
Measuring where the boot process is spending its time is the first step to optimizing it.
虽然花费时间和调用次数通常是数据中最有价值的点，还是应当仔细察看函数的调用过程，可能发现其它优化方法。
Although time spent and number of calls are usually the most valuable bits of data, looking more closely at how functions are being called might yield other optimization candidates.
编译过程中，代码优化能减少目标代码的运行时间和存储空间，具有重要作用。
During the compiling, it is of importance to have code optimization reduce the operating time and loading space of target code.
在防振锤的设计过程中，需确定防振锤各技术参数对防振锤功率特性的影响程度，以节省优化时间，减少试制费用。
The effects of damper technical parameters on its power characteristics must be determined in the design process to save optimization time and reduce development cost.
建立了折衷考虑资源、时间和成本约束，以及决策节点的多项目环境下的经营过程配置优化解析模型。
The analytic model of business process assignment optimization is presented to undertake the trade-off among resource, time, cost constraints and decision nodes in multi-project environment.
在保证主从端数据一致的前提下，LVR通过优化主端对上层写请求的处理方式以及从端的I/O处理流程，减小了数据复制过程对应用响应时间的影响；
With the principle of data consistency, LVR lowers the response time of replication process by optimizing I/O flow on primary site and that on secondary sites.
仿真结果表明，通过实施优化控制，能够使产品牌号切换过程的过渡时间和过渡料数量降低60％以上。
Simulation results show that through implementation of optimal control, the transition time and off-spec product can be reduced over 60% in the polypropylene grade transition.
采用复合法制备型壳，在制备过程中，改变不同的环境湿度和温度而得到型壳的不同干燥时间曲线，确定工艺参数优化值。
Using mold prepared by compound method, on the basis of different drying time curve attained by changing environmental humidity and temperature, the optimized processing parameters were determined.
通过对物流车辆配送过程的分析，建立了带时间窗约束的物流配送路径优化问题的数学模型。
A mathematical model of logistics distribution route with time window was proposed according to the analysis of the logistics vehicle distribution process.
查询语句的优化就是对于给定的查询，选择代价最小的操作序列，使查询过程既节省时间，又节省空间。
The optimization of query sentences is to select operation sequence with minimal costs in terms of given query so as to make query a time-saving and space-saving process.
支持生产过程的最优化，以达到设备正常运行时间，首次合格率，换型目标和其他持续改进。
Support the optimization of manufacturing process to meet Uptime, First Time Quality, Changeover goals and any other continuous improvement activities.
物料搬运系统的优化有利于搬运过程中成本最低化和时间的最小化，同时降低劳动强度，提高人员工作效率。
The optimization of materials handling system is propitious to minimization of time and cost during the handling course, and it also decreases the intensity of Labour and increases work efficiency.
目前，时间-费用优化问题的研究一般是在CPM网络中进行的，传统的CPM网络不符合项目进行过程中的实际情况。
At present, the study of the time-cost optimization is generally in the CPM network, and the traditional CPM network is not in line with the actual situation of the project.
分析了延期间隔对爆破效果的影响，介绍了不同延期间隔阶段的岩体爆破过程，通过综合优化爆破时间，达到最佳爆破效果。
The influence of delay intervals on blasting effects was analyzed, the optimum blasting effects ware reached through optimizing the delay time.
在加热拉伸过程工艺方面，本文从预加热时间和拉伸速度两个角度进行研究，对参数进行优化处理。
For the process of the fiber taper drawing, the pre-heating time and stretching speed are carefully examined for parameter optimization.
结论优化门诊流程，能合理安排患者就诊过程，减少患者在门诊过程中不必要的等候时间，提高门诊整体服务水平。
Conclusion Grading-up clinical service flow-sheet may arrange reasonable the process of visit, shorten obviously the waiting time, increase the whole service level of out-patient clinic.
运用响应面分析法优化泥鳅蛋白酶解的工艺条件，探讨了泥鳅蛋白酶解过程中液料比、酶解温度、酶解时间对多肽得率的影响。
Response Surface Methodology (RSM) was used to gain the optimal parameter of processing and to discuss how the parameters influenced the extraction rate of peptide.
在有限元计算过程中，可通过优化节点编号来减少整体刚度矩阵的带宽，从而节约存储空间，减少有限元分析的计算时间。
In finite element analysis, the bandwidth of the whole stiffness matrix is reduced by optimizing the node numbering, thereby the needed memory space is saved and the calculation time is reduced.
同时，通过研究耦合任务集序列规划问题，提出了两种基于时间的优化撕裂算法，可支持设计过程的有效重组。
Meanwhile, as to order planning of coupling tasks, two kinds of time-based tearing algorithms are given to support reconfiguration of development process effectively.
传统的生产管理方式很难全面管理整个生产过程，更难以实现生产过程在时间、成本上的综合优化运行。
Traditional production management has the difficulties in managing the whole production process, and what's more, it's hard to realize the whole optimization in both time and cost.
通过大量实验，优化了分析过程的色谱最佳条件，找准了六通阀的切换时间；
Through many experiments, the chromatographic optimum conditions in the analyzing procedure and the precision switching time of the six-port valve were defined.
同时对反应过程中的甲酰化、环合方法、反应时间进行了探讨，优化了反应条件，提高了产率，并对化合物的荧光光谱进行了分析。
Also the optimum reaction conditions including formylation, method and reaction time of cyclization were studied to enhance the yield. In the end, their fluorescence spectrum are analyzed.
本文针对受时间约束的运输问题，提出了一种基于表上作业法的优化求解算法，并用算例说明了该算法的求解过程。
Aiming at the transportation problem with time constrained, a kind of optimized arithmetic based on table-working method is presented in this paper.
合成过程中对各步进行了工艺优化，通过设计单因素实验，找到了反应的最佳条件，如溶剂、时间、投料比等，使得产品收率有了较大的提高。
Each step was optimized during Synthesis processes and single factor experiments were carried out to determine the most effective conditions such as solvent, time, material ratio and so on.
合成过程中对各步进行了工艺优化，通过设计单因素实验，找到了反应的最佳条件，如溶剂、时间、投料比等，使得产品收率有了较大的提高。
Each step was optimized during Synthesis processes and single factor experiments were carried out to determine the most effective conditions such as solvent, time, material ratio and so on.
应用推荐