用旋转电极法制取高纯合金粉末是一项新的工艺。
The technology with the turned electrode is a new technology of producing metallic powder.
采用等离子旋转电极工艺（PREP）制取镍基高温合金FGH95粉末。
The FGH95 powder was produced with the plasma rotating electrode process (PREP).
介绍了等离子旋转电极工艺(PREP)制粉设备、主要工艺参数和粉末形成机理。
A plasma rotating electrode process (PREP) equipment, process parameters and powder forming mechanism were introduced.
本文结合我院研制的旋转电极制粉炉，提出了弧压-功率复合控制自耗电极位置的方案。
In this paper an arc voltage-power compound control system was proposed for developing a vacuum spinning consumable electrode powder making furnace.
采用旋转电极型生物反应器（B ERC）脱氮，对以氢气作为电子供体的自养反硝化进行了研究。
A new process of the bio-electrode rotating contactor (BERC) for denitrification was developed, and study was made for autotrophic denitrification by using hydrogen as electron donor.
采用新型的旋转电极辉光放电反应器，在常温常压下对辉光等离子体作用下的甲烷转化制C2+烃进行了研究。
The experiments of glow discharge plasma conversion of methane to C2 hydrocarbons were conducted by a novel reactor with rotary electrode at room temperature and atmospheric pressure.
研制了一种新型的带有一个多尖端旋转电极对一个同心圆筒型固定电极的甲烷放电制备碳二烃的等离子体反应器。
A novel plasma reactor with rotary multi tip electrode and a fixed concentric cylinder electrode has been developed in order to use in CH4 discharge and to produce unsaturated C2 hydrocarbons.
为了寻求高效、经济的高氮钢生产工艺，用等离子旋转电极工艺（PREP）生产高氮钢并测试了所生产的几种典型高氮钢的性能。
The high nitrogen steels (HNS) were produced by plasma rotating electrode process (PREP), and the properties of HNS specimens were examined.
通过技术鉴定证明，XYD - 3型旋转圆环-圆盘电极可以作为理想的测试仪器在电化学研究中应用。
The technical verification has demonstrated that model XYD-3 rotating ring-disk electrode is an ideal instrument which can be applied in electrochemical research.
采用1286电化学接口及旋转圆盘电极测定了硫酸铜镀液阴极极化曲线和循环伏安曲线。
Cathodic polarization curve and cyclic voltammetric curve of sulfate copper plating solution are determined with 1286 electrochemical interface and rotating disc electrode.
本文在旋转圆盘电极数据处理中，为避免增大计算误差，采用了新的计算方法。
A new calculation method was used in order to avoid increasing calculation error in the data processing of the rotating disc electrode.
本文从应用的角度叙述了旋转环盘电极的基本原理以及在研究氧的还原反应动力学规律中所采用的方法。
This PaPer describes the fundamentals of Rotating Ring-Disk Electrode and methods of studying the dynamics of oxygen reduction.
采用不同旋转速度的电极进行电火花深小孔加工，通过采集加工时间数据，得到多条加工曲线。
The experiment used electrode with different rotation speed to process deep-small holes, and collected the time data during the whole process, after this more of the processing curves could be formed.
实验表明，当电极旋转时，“瓶颈”现象都推迟出现或减少出现，总加工时间都不同程度地降低。
Experiments show that there are several processing "bottlenecks" stage, which is the main reason of low efficiency.
经对实际体系进行测定，并用交流阻抗法、旋转圆盘电极和恒电流暂态等多种测试方法进行验证；
The actual system has been measured and its results have been verified by methods of alternating resistance, revolution disc electrode and constant cur- rent temporary state.
设计出新型旋转圆盘电极体系回收金属镉，电流效率达到90%以上。
A rotating disc electrode system was designed to recover Cd and the current efficiency was over 90%.
在酸性溶液中，使用旋转圆盘电极，研究了溴离子电极氧化反应的动力学特性。
Kinetic experiments of Br - oxidation on a rotating disk platinum electrode in acid solution were carried out.
采用新研制的具有旋转螺旋状电极的大气压辉光放电等离子体反应器催化甲烷偶联制碳二烃。
Methane coupling to produce C2 hydrocarbons was studied with a newly developed rotary helix electrode in glow discharge plasma at atmospheric pressure.
在电火花铣削加工中，由于工具电极作旋转运动，其损耗呈轴对称分布，使工具电极的补偿成为可能。
In electric discharge milling machining (EDMM) process, the rotation of the tool electrode makes tool wear be axial symmetrical distribution, so it is possible to be compensated.
将旋转圆盘电极体系应用于高速镀锌层粗糙度的研究。
Rotating disk electrode system is used to study the coating roughness in high-speed zinc plating.
以旋转线扫伏安和旋转循环伏安法研究了甲醇的电化学氧化还原过程中电极旋转速度的影响。
The electro-oxidation of methanol in aqueous solution was investigated by linear and cyclic voltammetry with platinum rotation disk electrode.
利用旋转环-盘电极方法开结合循环伏安技术研究了磷酸溶液中亚硒酸的电化学还原机理。
In this paper the electrochemical reduction mechanism of selenious acid(H 2SeO 3) in phosphoric acid solution was studied by rotating ring-disc electrode and cyclic voltammetry techniques.
第一电极区分布在第一接触电极绕旋转件的旋转中心在固定件上旋转所覆盖的区域。
The first electrode area is distributed in the area covered by the first contact electrode which rotates on the fixed part around the rotating center of the rotating part.
第二电极区分布在第二接触电极绕旋转件的旋转中心在固定件上旋转所覆盖的区域。
The second electrode areas are distributed in the area covered by the second contact electrode which rotates on the fixed part around the rotating center of the rotating part.
电极通过导线连接滑环，滑环与转轴同步旋转，滑环连接数据采集系统。
The electrode is connected with a slip ring through a conducting wire. The slip ring and a rotating shaft rotate synchronously and the slip ring is connected with a data acquisition system.
旋转件包括一个第一接触电极及一个第二接触电极。
The rotating part comprises a first contact electrode and a second contact electrode.
旋转电连接头在柱状接头的头端面和外表面分别设有环状电极片和侧弹触片。
Said electric gang socket has annular electrodes and bottom contacts on its internal side wall and bottom of its recess.
旋转电连接头在柱状接头的头端面和外表面分别设有环状电极片和侧弹触片。
Said electric gang socket has annular electrodes and bottom contacts on its internal side wall and bottom of its recess.
应用推荐