不相等阔移接纸是指陈不陈料带的阔度差别。
Width of the handing-paper refers to the old and the new width of the Strip .
定位装置将所述至少一条料带定位在新的位置。
And the orientation device orients at least one material band to new location.
模具计划应包管起码的任何变化料带步距的料带扭曲。
A die should be designed to minimize any strip distortion which would tend to change the distance between pilot holes (alter the progression).
聚四氟乙烯编织盘根:是用纯f 4生料带捻成线,经编织、压制定型而成。
PTFE woven packing sets: twisted into threads from F4 raw material belts, before woven and shaped into products.
在扫数连续模中起码安置两个安定检测开关去检测料带是否精确送进以及产品是否脱落。
A minimum of two safety switches must be installed on all progressive dies to probe for proper strip advancement and part out detection.
讨论了工艺条件对成型及样品质量的影响,加入复合塑化剂,可获得柔韧性良好的超薄料带;
The super-thin tape with the good flexility can be obtained via adding complex plasticizers;
在正式设计之前必须提供料带排布,料带包含料带宽,步距,冲床吨位,料带应保证废料不停留在模具上。
The strip layout is to reflect the stock width, the progression, and the tonnage required to produce the stamping. Strip layouts should be developed so that scrap pieces are not left in the die.
本发明是关于一种膜片的贴附方法、膜片送料机及其送料带,此送料带是用以承载及输送多数个膜片,且送料带具有多个配料区。
The present invention relates to a sticking method of diaphragm, diaphragm conveyer and its conveying belt. Said conveying belt can be used for bearing and conveying several diaphragms.
这件上衣连工带料合多少钱?
How much will this coat cost, including material and tailoring?
在涂料盘中,挡板应用在引导涂料去带料辊和引导气泡从带料辊移开。
In the coating pan, baffles are used to both direct the flow of paint to the pick-up roll and direct air bubbles away from the pick-up roll.
硫化橡胶制的传动带或输送带及带料。
Conveyor or transmission belts or belting, of vulcanized rubber.
纺织材料制的传动带或输送带及带料,不论是否用塑料浸渍、涂布、包覆或压层,也不论是否用金属或其他材料加强。
Transmission or conveyor belts or belting, of textile material, whether or not impregnated, coated, covered or laminated with plastics, or reinforced with metal or other material.
缓冲托辊:安装在输送机受料段下方,减少输送带所受的冲击,延长输送带使用寿命。
Buffer rollers: conveyor by the material installed in the bottom section to reduce the belt blow to extend belt life.
带理料线,可以与切纸机配套连接,无需人工放纸。
With feeding machine production line, can connect with the paper cutting machine, Without manpower.
买些不带调味料的冰冻蔬菜,带特别酱料的冰冻蔬菜要比不带的或者罐装的贵很多。
Choose plain frozen vegetables. Frozen vegetables in special sauces are much more costly than plain frozen or canned vegetables.
如果带料停机,很容易造成机件损坏。
煤料和石灰石场应有一个屋面遮盖区,用以遮盖漏斗区以及通过传送带输送至粉碎机的材料堆。
The coal and limestone yards shall have a roofed covered area corresponding to the hopper zone and a portion of the materials pile to be transported by conveyor belts to the pulverizer.
适用于各种含PVC成份的皮料、厚度的皮革,皮带,输送带,跑步带的贴合和接驳和熔接。
Applicable to all kinds of ingredients containing PVC leather material, the thickness of leather, belts, conveyor belt, treadmill belt fitting and the connection and weld.
在分析了现用的带式给料溜槽基础上,提出了一种曲面给料溜槽。
Based on the analysis of present feed trough, provide a kind of curve_surface feed trough.
介绍了带凸缘拉伸件可调式落料拉伸复合模设计,实现对凸缘直径尺寸可以进行调整以实现一定公差要求的模具结构。
Introduced design of the adjustable blanking-drawing compound for the drawing with flange, the drawing die could adjust the flange size, and satisfied the part tolerance requirement.
通过对现场使用的带式输送机给料槽存在的问题进行分析,设计出一种曲面给料槽。实践证明使用效果良好。
Through analyzing the problems existing in the belt conveyors in site, this paper puts forward a kind of trough with curved surface which behaves nicely in practice.
对丙烯循环气压缩机的故障情况进行了分析,认为压缩机带液及粉料进入压缩机系统是造成该机故障的主要原因。
The fault analyses were made of the propylene circulating gas compressors. It was concluded that the major causes were that some fluid and powder materials entered the compressor system.
以传送带、料门给料的称重过程为研究对象,提出一种新型动态定量称重控制方法。
With the weighing process composed of conveyor all feed as example, a new dynamic quantitative weighing control method is stated.
以传送带、料门给料的动态称重过程为对象,提出了一种新型动态定量称重控制方法。
By studying the weighing process composed of conveying belt and feeding gate, a new dynamic quantitative weighing control method is presented.
利用带限制的混料均匀方法对三维打印成形的粉末配方进行试验设计。
Method of uniform design with restricted mixtures was used to design the experiments of powder mixtures for three dimensional printing.
对拖拉机、汽车发电机定子铁心卷叠加工工艺的若干关键技术作了较为全面的论述,并归纳出有实用价值的带料展开齿节距计算式。
It is the technology of coiling metal strips to produce stator cores of direct current dynamo used in tractors and automobiles being paid great attention increasingly in our country.
分析了转换推杆零件的冲压工艺,介绍了带料排样方案及级进模模具结构设计。
The pressing process of transforming throwout lever is analyzed, Layout of multi-position progressive and die structure are introduced.
带式输送机是斗轮堆取料机中重要环节,在其它方面也广泛应用。
Belt conveying systems is expected bucket Stacker and an important link in the machine, in other areas also widely used.
介绍了摆动连杆的冲压工艺分析过程、载体的合理选择、带料排样方案的确定及级进模模具的总装结构设计。
Introduced the pressing technology analysis, the carrier choosing, layout designing and structure design of the progressive die for the swinging connecting rod.
介绍了摆动连杆的冲压工艺分析过程、载体的合理选择、带料排样方案的确定及级进模模具的总装结构设计。
Introduced the pressing technology analysis, the carrier choosing, layout designing and structure design of the progressive die for the swinging connecting rod.
应用推荐