数码电路控制，红外线感应，伸手自动出风；抗干扰能力强。
Featured with digit circuit, infrared sensor, and good interference resistant capacity.
介绍了利用VHDL硬件描述语言结合FPGA可编程器件进行数字钟的设计，并通过数码管驱动电路动态显示计时结果。
The paper introduces the design of digital clock based on FPGA and VHDL, the time of clock can be displayed with the digital driving circuit.
该设备使用特定应用集成电路转化为电信号的眼睛从数码相机的图像，大脑用来创建一个视觉形象。
The device uses application-specific integrated circuits to transform digital images from a camera into electrical signals in the eye that the brain uses to create a visual image.
同时，本系统的数码显示电路，可用来显示温度的设定值和当前值。
At the same time, it has numeral show circuit to show the wanted and the current temperature.
LED数码管是由数码电脑控制电路和RGB三色LED光源组成，是一种新型高级装饰灯具。
The LED numeral tube is composed by the digital computer control circuit and RGB LED photosource, is one kind of new senior decoration lamps and lanterns.
数字控制电路负责控制洗衣机的工作过程，主要由AT89S51单片机、两位共阴数码管、按键、蜂鸣器、LED指示灯组成；
Digital control circuit takes charge of controlling the working course. it consists of AT89S51, double-figured common-cathoded numeral display, buttons, buzzer, LEDs.
本设计还加入了常用的数码管显示及状态灯显示灯常用电路，使得整个设计更加完整，更加灵活。
The design also joined the commonly used digital control and status lights that indicate lights commonly used circuit, making the whole more complete and more humane.
介绍用LED发光二极管组成数码显示的一种编码方法，并介绍了译码驱动电路及与单片机的接口。
This paper introduces a coding method of using LEDs to constitute digital display of Numbers. The related driving circuits and their interfaces with Micro-controllers are also introduced.
产品使用于：移动通信、VCD、DVD、数码相机、液晶显示器、集成电路、功放机、医疗器材等高科技电子产品。
Products for use in: mobile communications, VCD, DVD, digital cameras, liquid crystal displays, integrated circuits, power machines, medical equipment and other high-tech electronic products.
介绍了用数码遥控器改装移动X线机曝光手闸的过程和电路原理。
Describes the refitting and electric circuit principle of the exposure handbrake for mobile X-ray machine with digital remote controller.
针对基于硅基液晶(LCOS)的数码冲印系统，设计了一种LCOS的驱动电路。
Here is introduced a design of liquid crystal on silicon (LCOS) driver for the digital photofinishing system.
介绍了一种主要由8051单片机、MAX7219驱动的LED数码显示电路构成的相位差测量仪。
A new instrument which can measure the phase difference by 8051 microcontroller and LED digital display current driven by MAX7219 is introduced.
该系统的数字电压表电路简单，可以测量0 ~5V的电压值，并在四位LED数码管上轮流显示或单路选择显示。
The system's digital voltmeter circuit is simple, can measure the voltage 0 ~ 5v, and the four turns on the LED digital display or a single select Show.
采用ADUC812单片机、数码管等，设计了集成化、嵌入式的自检测系统硬件电路，并利用汇编语言编程实现了机内自检测软件。
Then, the integrated and embedded self-test circuit was designed based on single chip ADUC812 and nixie tube etc. The self-test software was programmed based on assembly language.
并且通过不同按键可以实现调频，电路复位等功能并在LED数码显示管上进行显示出来。
Functions such as frequency modulation and circuit reset are achieved with different buttons and shown on the LED digital display tube.
把数码设备中的固态存储电路分成若干存储单元，每一存储单元通过电子开关供电。
The solid state memory circuit in a digital device is divided into a plurality of memory units, each of which is powered through an electronic switch.
可直接驱动液晶显示器，增加适当的驱动电路可采用数码管显示。
It is possible to drive liquidcrystal display directly, and to use the digital tube demonstration by increasing the suitable actuation electric circuit.
并且通过不同按键可以实现调频，电路复位等功用并在LED数码显示管上停止显示出来。
And through the different keys can realize FM, circuit functions and reset in XianShiGuan on LED digital display.
电路结构简单，数码显示可精确到小数点后一位。
Simple circuit structure, the digital display is accurate to one decimal place.
设计了基于CAN总线的地址编码器，通信总站的数码显示电路，控制继电器电路，LNK501开关电源芯片电路。
Design the CAN bus address encoder, communication terminal digital display circuit, control relay circuit, LNK501 switching power supply chip circuitry.
该电路具有平安快速充电功能，可以广泛 应用于室内外单节锂离子电池的充电，如手机、数码产品电池等。
The circuit has a safe and fast charge function can be widely used in indoor and outdoor single lithium-ion battery charging such as mobile phones digital products batteries.
数字式电子发火机由单片机控制电路、数字电路、数码管显示电路以及检测与发射电路5部分组成。
The digital electronic ignition device was composed of 5 sections of MCU control circuit, digital circuit, light emitting diode display circuit, detection circuit and launching circuit.
柱面散光轴位角进行手动测量，数码显示的数字化屈光度测量仪。本仪器采用特殊的处理电路，消除了外来噪声产生的误触发脉冲及输出错误积累而引起的位置偏移。
This instrument has a rotary encoding and raster and it has a special processing circuit not only eliminating trigger pulse case by noise but also clearing up position accumulates error.
特点：电子控温电路，实时温度数码显示，低水位声光报警装置。
Characteristics: Electronic temperature-control circuit, real-time temperature numeral display, and low water level acoustooptic alarming device.
根据数码像机的工作原理和显示驱动电路的结构。应用硬件设计出数码像机显示驱动电路。
On the basis of the working principle of digital camera and the frame of display circuit, the display diving circuit of digital camera was designed by using hardware.
系统硬件包括按钮开关输入电路、七段数码管输出电路、加热电路、升压电路以及波形控制产生电路。
The system hardware includes switch input circuit, seven segments LED output circuit, heating circuit and boost circuit.
文章就采用中大规模集成电路设计一个新型的多波形发生器，并由单片机系统控制其输出频率和幅度的步进调节，实现数码显示等展开了讨。
The step adjustment of the generator output frequency and amplitude is controlled by a single chip microcomputer in order to realize the digital display.
文章对LED数码灯管的原理、LED数码字幕灯柱的结构、安装电路及功能进行了介绍说明。
This paper presents the principle of LED numeral lighter, structure, circuit & function of LED lampstandard.
近年来，以二层覆铜板为基材的挠性印制电路板，具有薄、轻、结构灵活的鲜明特点，被广泛应用于折叠手机、数码相机、笔记本电脑等。
In recent years, flexible printed circuit boards based on two layer flexible copper clad laminate has been widely applied in folding mobile phone, digital camera and notebook computer etc.
该系统包括单片机系统电路、寻迹检测电路、平衡检测电路、步进电机驱动电路、数码显示电路等。
The control system consists of AT89S52 single chip computer system, autonomous tracing circuit, balance detection circuit, driving circuit of stepping motor and LED display circuit.
应用推荐