BAPI实质上是SAP系统中的一个RF c函数模块。
大多数模板系统（包括 Cheetah及其 #include指令）都允许您从另一个模板调用一个模板。
Most templating systems (including Cheetah, with its #include directive) let you call one template from another.
鉴于含有加性噪声的指数模型描述了一类重要的非线性随机系统。
The exponential models with additive noise describe a class of important nonlinear stochastic systems.
蓄电池高度智能化的运行数模，系统根据实时监测的蓄电池各项参数，自动完成对每只蓄电池性能的现场诊断。
Highly intelligent battery run mathematical model, the system according to the real-time monitoring of battery parameters, automatically on the properties of each battery site diagnosis.
本文提出了一种基于移动窗口的函数模型和随机模型系统误差自适应拟合法。
Adaptive fittings for both the systematic errors and covariance matrices of the model errors by using moving Windows are presented.
论述了模拟仿真器与数字实时仿真系统各自的特点及数模混合实时仿真系统的结构和应用情况。
With the analysis for the characteristics of analogue simulator and digital real-time simulator, the principle and application of hybrid real-time simulators are presented.
我国目前的电话网是数模混合的，所以我国目前的信令系统也处于随路信令和公共信道信令并存的阶段。
Our country present telephone network is mixed by digital mode and analogy mode, so our country present signaling system is at the stage of CAS and CCS commixture .
提出了一种系统级电流使能控制结构，可广泛地应用在CMOS数模混合电路中，用于实现系统级的低功耗设计。
A low power design in system level using current steering architecture, which can be applied to the system of CMOS mixed signal circuit widely, is presented.
基于半参数模型的GPS系统误差处理的关键之一是选择合适的正则化矩阵。
One of the crucial steps is choosing an appropriate regularizer in processing GPS systematic errors based on the semi-parametric model.
由于公开密钥采用大素数模运算，而加密和解密变换却采用相对较小的素数模运算，故系统实现比较方便，在微机上能够很容易实现。
Since the public keys use big prime modular operation and the translation of the encryption and decryption use smaller prime modular operation, so it is convenient to realize this system.
加之每块计数模板控制通道数量的限制，在光电编码器应用数量较多的系统中，会增加计数模板的数量并占用大量的系统资源，增加控制成本。
The number of each counter modules channel is limited, it needs a lot of counter modules and system resource in the system of photoelectricity encoder is much , and it can increase control cost.
借助于关联系统的可靠性函数模型，对简单系统的联结关系进行了系统分类，同时分析了该模型在软系统中的应用方法和前景。
Recurring to this reliability function model, the coupling relation of the simple system is systematically assorted. At the same time, the application methods and foregrounds are analyzed.
实施后，解决了连轧孔型系统设计、优化数模运算等相关问题，提高了芯棒利用率。
The relative problems such as designing continuous rolling pass system and optimizing mathematical model operation are solved after practice and utilization rate of the mandrel is increased.
把半参数模型引入大地测量反演模型，有利于消除或削弱了测量数据系统误差对大地测量反演的模型参数的影响；
Having leaded the semi-parameter model into the geodetic inversion model, the effect of surveying data systemic error is eliminated or weakened on the geodesy inversion model.
由于计数模板硬件复杂，无疑会降低系统的可靠性。
Because the hardware of counter modules is complicated, the system dependability is lower.
通过实例分析，证明系统事故次数模型和质量指标评价模型是适用的。
It turns out from example analysis that both frequency model and quality index evaluation model are functional.
利用核电站反应堆中子动力学系统的单位阶跃响应数据，得到了该系统的非参数模型。
In this paper, a kind of non-parameter model is constructed with the unit step response of the nuclear reactor neutron dynamic system.
给出了控制系统的传递函数模型、结构图和自适应训练方法。
The transfer function model, the structure chart and the adaptive training method are proposed.
系统分为三大模块：钩子函数模块、网络通信模块和消息处理模块。
The whole system is divided into three modules: Hook function module, message dealing-with module and net communication module.
结果表明，短时间步温度反应系数模型可以较好地预测埋地换热器的换热性能，为地源热泵系统的设计与优化提供了依据。
The result proves that the short time step model can be used to predict heat exchange performance of the underground heat exchanger and to design and optimize a ground source heat pump system.
本文提出了把折光系数作为系统参数引入平差函数模型，在平差时予以补偿的方案。
This paper put forward a scheme, in which regarding refraction coefficient as systematic parameter introduced into adjustment model for compensation.
一般的定量预测方法因用固定参数模型预测一个时变参数系统的情况而致存在一定的局限性。
Generally fixed quantity prediction method has a certain deficit because of the case that predicts a time moving parameter system with fixed parameter model.
fifo队列使用方式按数控系统工作模式定义，参数模式下传递参数信息，自动加工方式下传递插补数据。
FIFO mode is defined according to operation mode of CNC system, the parameter is transmitted in the parameter mode, and interpolation data is transmitted in automatic machining mode.
本论文的嵌入式系统开发工作，主要是基于GPS模块以及数模转换模块的应用。
The embedded system programming in this paper is based mainly on the application of GPS and ADC modules.
利用计量经济学方法建立了基于交通运输信息的高速公路交通管理系统用户满意度指数模型，并对测评方法进行了研究。
This paper presented the customer satisfaction index of estimation model for FTMS based on transportation information by economic method, and researched on its evaluation method.
介绍了数模混合信号仿真的设计流程，说明了一种在混合设计的各个层次上对系统进行仿真验证的自上而下的设计方法。
A design flow based on mixed-signal simulation is proposed. The top-down design method indicates simulation and verification at each level of the mixed signal system design.
提出了一种用神经网络技术构造激光切割加工工艺参数模型和建立加工参数自动选取系统的方法。
This thesis put forward a method to build the laser cutting parameters model and set up the automatic select parameters system with artificial neural networks technology.
提出了一种用神经网络技术构造激光切割加工工艺参数模型和建立加工参数自动选取系统的方法。
This thesis put forward a method to build the laser cutting parameters model and set up the automatic select parameters system with artificial neural networks technology.
应用推荐