提出了一种基于元结构的数控机床结构优化设计方法。
An optimization design method for NC machine tool structures based on unit structures was proposed.
针对数控机床的位置伺服系统，为其控制器设计了一种复合滑模变结构控制算法。
Aiming at the position servo system of NC machining tool, this paper designs a kind of control arithmetic on compound sliding variable structure for its controller.
本位置伺服系统它采用STD总线模块式的多cpu结构，主要面向经济型数控机床。
The position servo system it USES STD bus module type more CPU structure, mainly for economical nc machine tools.
本文提出了一种新型的神经网络结构的位置控制器，给出了该控制器的学习算法，并进行了数控机床位置伺服系统的仿真实验。
This paper proposes a new type position controller with neural network structure, gives it 's learning rule, and do the simulation experiment on position servo system of NC machine.
数控机床的模块化设计包括机械结构的模块化设计和电气控制系统的模块化设计两部分。
The modularized design for a CNC machine tool includes two aspects which are mechanical structure and electric control system.
介绍了财塑导轨应用于数控机床上的结构形式和TS F型贴塑导轨软带的粘接操作工艺。
This paper presents the structural style of plastic-iron slideways applied for CNC machine tools and the process for sticking TSF model plastic-iron slideway.
但国产高档数控机床自主原创能力不强，迫切需要产品结构的调整和产业水平的提升。
But the independent innovative capability of domestic high-grade CNC machine tool is not strong. It is urgent to adjust the product structure and upgrade the industrial level.
在此基础上设计了汽车同步器齿套摆线加工数控机床的总体结构；
On the basis of these, the general structure of the NC machine tool for synchromesh sleeves is designed with principle of hypocycloidal machining.
数控机床造型设计是一项综合了美学知识、人机工程知识和产品结构知识的复杂的设计活动。
The form design of NC Machine Tools is a complicated work that comprehends the knowledge of aesthetics, ergonomics and product structure.
介绍了数控机床故障诊断与预报系统的功能、结构、使用技术和特点。
The function, configuration, using technique and characteristic of the fault diagnose and forecast system of nc machine were introduced.
构建了基于Web的数控机床采集服务平台，分析了平台结构，设计了该平台构成的各功能模块。
Data gathering serve platform of nc machine based on WEB is established, all function modules of this platform is designed and the construct is analyzed.
数控机床因结构复杂，其故障的确诊和排除不易确定。
It is difficult to find out and erase failures of computer numerical control machine due to its complicated structure.
文章以BKX - I型变轴数控机床为研究对象，利用矩阵结构分析法建立了变轴数控机床的静刚度计算模型。
In this paper, by using the method of matrix structural analysis, the static stiffness model are derived from researching BKX-I varied-axis NC machine tool.
本文介绍了数控机床远程故障诊断系统的结构与功能，论述了系统的构成、实现方法以及所涉及的主要技术。
This paper introduced the general structure and function of remote fault diagnosis system. And it analyzed the composing, realizing method and main technology of the system.
介绍了一种基于微型计算机的多功能数控机床的数控系统，并具体论述了该系统的软件结构。
In this paper, a numerical controlling system of multi function machine tool is introduced, and explained concretely software structure of the system.
特殊结构或采用特殊数控系统的数控机床开发专用后置处理器具有重要的现实意义和工程应用价值。
It is meaningful and valuable in engineering practice to develop special postprocessor aimed at numerical control machine with special structure or special numerical control system.
由于工作台摆动角度受机床结构的限制，小摆角五坐标数控机床不能直接进行离心叶轮的连续加工。
Five-axis NC machine tool with small pendulum Angle table can not carry out continuous cutting of the part of centrifugal turbine because of the structure of machine tool.
结合嵌入式终端的软硬件结构特点和外协产品数据的泄密环节，采取在服务器、终端与数控机床以及它们之间的传输线路处采取安全措施和数据加密技术，保证了外协产品的数据安全。
Safe measures and data encryption technology are applied to ensure that the cooperative product's data is secure in the terminal, the server, the CNC machine tool and transmission lines between them.
本文提出了数控机床的故障诊断与预报系统的设计思路，初步设计了系统的结构，确定了系统的主要功能；
This paper brings forward the fault diagnosis and forecast system of NC machine , and designs it's configuration and function .
本文针对齐齐哈尔重型数控设备股份有限公司的重型数控机床进给系统的结构进行合理化设计，并提出一种快速有效的机床设计方法。
This thesis mainly studies how to design the structure of heavy NC machine tool's feed system which is developed by QIQIHAR heavy CNC Equipment CO.
本文提出造型原型的概念，建立了数控机床内部结构到外观造型的关系模型，并且指出关键轮廓是造型原型的表现形式。
The concept of forming prototypes was put forward to construct a theoretical model about the projective relationship, and it was pointed out that the key profiles represent forming prototypes.
通过描述虚拟数控机床的功能分析，提出了虚拟数控机床的框架结构，并给出了它的工作原理和应用。
The structure is brought forward according to the functions of VMT and its principle and applications are given in this paper simultaneously.
深入分析了多轴数控机床的结构特点，提出了基于多体系统理论的多轴数控机床描述方式。
We have studied the modeling technique and the regularity of the machining errors for multi-axis NC machine tools based on the analysis of their structures.
本文介绍了博世-力士乐公司的M TC 200开放式数控系统硬件及软件结构特点，阐述了该系统在齿扇加工专用数控机床改造中的应用。
This paper introduces the character of hardware and software structure about MTC200 system, and narrates the application of it to the rebuilding of fan-shaped gear cutting numerical control machine.
介绍了设计和制造数控机床机械结构的新技术，这对于提高国产数控机床的质量和可靠性具有指导意义。
The new technology are introduced in designing and manufacturing the mechanical structure of NC machine. These are useful and practical for improving the quality and reliability of the NC machine.
电脑设计，结构合理。数控机床加工，制作时间一般12天左右。
The computer design, the structure is reasonable. processing by CNC, leading time is about 12 days.
最后建立了五坐标数控机床不同结构类型的坐标转换(工件坐标系—机床坐标系)数学模型。
Lastly, the mathematical models of coordinate conversion between workpiece coordinate system and machine coordinate system are represented.
经多年来数控机床的实际应用，结构合理，性能良好。
The years' practical application has proved that the structure mentioned in the article is of high rationality an...
本文数控机床故障诊断的贝叶斯网络模型的结构确立，以传统的故障树分析为基础。
On the basis of analyzing the advantages of Bayesian Networks when researching problems of uncertainty, a concrete model about the quality of workpiece of CNC lathe was established.
本文数控机床故障诊断的贝叶斯网络模型的结构确立，以传统的故障树分析为基础。
On the basis of analyzing the advantages of Bayesian Networks when researching problems of uncertainty, a concrete model about the quality of workpiece of CNC lathe was established.
应用推荐