针对电缆行业制造的特点，利用现场总线网络控制技术自身的优点，提出了一套较为优化的数据采集和监控方案。
According to the characteristic of cable manufacture, utilizing the advantage of bus network control technology, and putting forward an optimization project of data gather and monitor.
针对传统工业现场监控方式的不足，设计了一种基于微机串行通信方式的数据采集和控制系统。
Aim at the insufficiency of traditional way of monitoring in industry field, designed a data acquisition and control system based on serial port communication.
基于计算机模拟技术进行监控的数字化生产调度监控系统由数据网络采集系统和上位机监测处理两部分组成。
Computer analog-based digital monitoring system of production dispatching is composed of data network collecting system and upper level computer monitoring and processing system.
使用MDS 2710无线数传模块来实现控制中心一点对矿井多个远端的各类数据的采集、监控和控制。
Use MDS 2710 wireless data transmission module to achieve the collection, monitoring as well as control of those distal end various data by control center.
针对新兴的以太网式DNC系统，重点研究了数据采集、远程监控和远程诊断等功能。
The function of data collection, remote supervision and remote diagnosis were mainly studied in light of the updating Ethernet pattern DNC system.
采用新建立的试车台数据实时采集与监控系统，测量了该单级跨声速风扇的总性能和采用处理机匣后风扇的总性能、基元级性能。
By using real time data gathering and test system of the aero engine test bed, the detail measurement of single stage transonic fan performance with and without different casing treatments were made.
并研究编制了整个系统的监控软件，包括A/D采集和控制、数据通讯、显控等部分接口驱动程序以及数字信号滤波数据预处理软件；
And the paper studies and works out monitoring software in the whole system, including A/D acquisition and control, data exchange, DCI driver and digital signal filtering and data preprocess software.
该系统比传统的数据采集系统具有更好的安全性和实时性。并可应用在实时图像监控等复杂系统中。
This system is safer than the traditional data acquisition system and has a good real time performance, and it can be applied to some complex systems, such as the real time image monitoring-system.
为了解决锅炉水处理装置节能和安全运行问题，在工程设计中采用了计算机监控和数据采集系统。
In order to resolve the problems of energy saving and safe operation of boiler water treatment device, applies computer supervisory control and data acquisition system on engineering design.
使用全自动数据采集设备和处理系统，对每一工况下的支架、拱圈应力进行适时监控，确保了施工过程中支架和主拱圈的安全。
Timely monitor of their stress in each working conditions can ensure the safe of support and main arch circle with full-automatic data acquisition system.
文章介绍的分布式智能门禁监控系统采用RS- 4 85总线技术，以程控电话网为媒介来进行远程的数据采集和设备控制。
Distributed intelligent door monitoring system realize remote control and data collection by RS-485 bus, the telephone network is used as transmission medium.
实现了DSP高速数据采集与监控系统的硬件和软件设计，采用了合理的滤波算法提高系统数据采集精度和实时性。
We have realized the hardware and the software design of DSP high speed data acquisition system. Used the reasonable filter algorithm to increase the system data acquisition precision.
此外，电力部门的电力数据采集结合图像监控功能，将更加完善用电环境的实时控制和系统的安全使用。
In addition, integrated the function of image monitory system, it will certainly improve the real time control for electric power environment and system security.
设计和实现了一个基于B/S&C/S混合模式的网络日志监控与安全审计系统原型，并对原型系统在实际应用环境中采集到的日志数据进行安全审计与分析。
The prototype of LSSAS in network based on B / S& C/ S mixing mode is designed and implemented, and the log data collected by prototype system in the applied environment are analyzed and audited.
利用PC机作为主控计算机，采用RS485网络系统对生产中的配料系统进行多点数据采集，并对整个配料生产过程进行监控和控制。
This paper describes a multipoint data sampling system for the manufacturing material-mixing system, which uses RS485 network system and PC as a master control computer.
监控点完成对数据的采集工作并经过编码由AIS发射出去之后，监控中心通过AIS接收各监控点的水深和位置信息。
The water depth data is collected and launched out by AIS after coding in supervision points, the supervision center receives the water depth data and location information from supervision points.
总结了燃气输配SCADA系统通信的一般需求，介绍一种通信软件程序设计思路，可以灵活高效地实现燃气输配SCADA中数据的采集和监控管理。
This paper presents common requirements, and ideas to program the communication software in SCADA system meet the demands of flexible and efficient datum.
最后还搭建了一套蓄电池数据采集调试系统，本系统基本完成了课题的目标，实现了蓄电池单体电压、蓄电池组总电压、蓄电池电流和蓄电池温度数据的监控。
Then a battery wireless data acquisition system is set up at the end of the dissertation. The system can monitor the single battery voltage, the total voltage, current and temperature of the battery.
现场监控器由数据采集卡和网络通讯卡组成，现场控制卡负责接收监控中心发出的控制命令，它们都是由一块51单片机控制，其软件开发都是使用了C51和51汇编程序。
Local controller card take charge of incepting the control command from monitoring center. They are all controlled by singlechips, C51 and 51 assemble were used to develop the controlling software.
节点能够实现对传感器数据的采集和处理，通过无线传感器网络以无线路由多跳的方式最终发送给监控中心。
Nodes can acquire and process sensor data, and finally send the data to the monitoring center by wireless sensor networks based on wireless multi-hop routing.
本文分析总结数据采集监控系统的特征并设计实现一般采集监控系统的数据结构，基于通用的数据结构基础之上，实现室内分布系统监控对象的定义和实现。
Repeaters Control and Monitoring system implement is based on the implement of a general control and monitoring system, which can be deploy and configure for special application.
本文分析总结数据采集监控系统的特征并设计实现一般采集监控系统的数据结构，基于通用的数据结构基础之上，实现室内分布系统监控对象的定义和实现。
Repeaters Control and Monitoring system implement is based on the implement of a general control and monitoring system, which can be deploy and configure for special application.
应用推荐