这一层充当其他所有层的数据多路复用器。
This layer acts as the data multiplexer for all other layers.
而多路数据访问是解决这一问题的良策。
这是由于延迟构造和AXIOM内的多路技术造成的，它将从一个API 输入的数据直接转发给另一个 API 输出。
This is due to deferred construction and multiplexing that takes place inside AXIOM and routes data coming in through one API directly out through another.
OFDMA是根据频分多路传输系统的思想，这是一种在一个频道上传输多个数据流的方法。
OFDMA is based on the idea of frequency-division multiplexing, which is a method to transmit multiple data streams over a channel.
但是从每次旅行的乘客人数的统计数据就可以看出，有些地区难以引进更多汽车、开辟更多路线的原因了。
But the statistics on passenger Numbers per journey show why in some areas it is so hard to introduce more vehicles or routes.
像通过多路复用(放在不同的位置)控制文件使数据库免疫、使用联机重做日志和归档重做日志这样的步骤，都是避免单点故障所必需的。
Steps such as immunizing ther database by multiplexing (putting in different locations) control files, using online redo logs and archiving redo logs are necessary to avoid a single point of failure.
本系统可以实现多路温度信号采集与显示，可以使用按键来设置温度限定值，通过进行温度数据的运算处理，发出控制信号达到控制蜂鸣器和继电器的目的。
The system achieves multi-channel temperature signal acquisition and control. Temperature limit is set by keyboard. The buzzer and relay are controlled by MCU.
该系统电路结构简单，对多路高速、宽动态范围的数据采集系统具有一定的通用性，可根据系统的需要进行扩展。
The system circuit is simple which is universal to with high-speed, multi-channel, wide dynamic range data acquisition systems, and can be extended according to the system.
提出了一种以pic 16f877单片机作为核心器件的多路数据采集系统的设计和实现方法。
This article introduces the designing method of the multi-channel data acquisition system with PIC16F877 as its kernel processor chip.
简要介绍一个针对多路谱仪放大器的读出与数据采集方法与系统。
A read-out and data acquisition system for the outputs of multi-channel spectroscopy amplifiers is introduced briefly in this paper.
基于单片机at89c51的数据采集子系统完成对多路声信号的同步采集，并把数字信号保存到片外共享存储器中。
The data acquisition subsystem based on AT89C51 acquires multichannel acoustic signal synchronistically and stores digital signals in the Shared memory.
提出了一种USB总线的多路数据采集系统软硬件设计方案。
The hardware and software design of multi-channel data acquisition system based on USB bus is introduced.
提出了一种USB接口的多路数据采集系统软硬件实现方案。
The hardware and software design of multi-channel data acquisition system based on USB interface is introduced.
本设计主要是通过对温度采集的研究来实现ARM7TDMI构架的多路数据采集。
This design is mainly through the acquisition of temperature ARM7TDMI framework to achieve the Multi-channel Temperature Reco data acquisition.
模块中主要分为两部分，第一部分由AD574A芯片和两个多路开关CD4051实现16路12位A/D转换，完成串行数据的采集；
The first part realizes the collection of the serial data by the AD574A and two CD4051 carrying out the 16-Channal 12-Bit A/D transition.
以单片机为核心，研究多路低速数据串行传输的一种实现方法，给出硬件连接图，阐述各部分工作原理及软件设计思路。
Using single chip as the core, the paper studies a way to realize multiplex low speed data serial transmission, presents hardware connection chart, expounds work principle and software design idea.
本文介绍一款新型基于FPGA的汽车测试用多路数据采集器原型设计，主要是面向汽车碰撞试验的测试工作。
This paper introduces a new type of vehicle test FPGA-based multi-channel data acquisition prototype design, primarily for automotive crash performance test.
而多路径之间的干扰对于多径路由协议的整体数据传输性能有着重要的影响。
Existing multipath routing protocols usually ignore the inter-path interference which can seriously affect the performance of data transmission.
通过人机对话设定初始参数，进行多路数据采集和处理，存储量大。
The system can be set parameters, and collects and manages multiplex data.
本文对多路复用技术和多路复用数据流的监测系统及设计模型进行了研讨。
The article carries out research on multiplexing, test system and design model of multiplex data flow.
系统设计实现了一个具有多路采集和远程传输功能的数据采集系统的解决方案。
This is a data acquisition system with the function of multiple collect and long distance transmission.
总线控制协议是高速多路串行数据总线的关键，它决定了多路串行数据总线的实时响应能力以及在高负载和低负载情况下的串行数据总线的特性。
Bus control protocol is the key or high rate multiplex data bus. The capacity of real—time responseness of multiplex data bus and properties in high and low load are decided by the protocol.
利用多路测风传感器采集风速和风向数据，设计了一种新型的基于双MSP430系列单片机的风力数据采集系统。
Using multi-roads sensors to obtain wind speed and direction data, this paper designed a new wind power data acquisition system based on double-MSP430 single chips.
控制系统除了实现对仪器的实时操作、监控其运行状态外，还要对当前反应杯的多路模拟信号进行实时数据采集。
The control system not only realizes the real-time operation and detects the status of instrument, but also collects data of many analog signals of response cup.
该系统可以显著提高多路数据采集的速度和数据转换精度，降低系统功耗。
This system can evidently raise the speed of the multiple data acquisition and the precision of the data conversion to reduce the power.
该系统由多路复用的RS232、RS485串行接口电路及多路数据采集系统组成，具有结构简单、工作可靠、经济实用等特点。
This system consist of the MUX RS232, RS485and data acquisition system. It is characterized by simple construction, reliability service and economy.
它先将原始数据流复制成多路并行数据，经频域扩频和时域扩频，再调制到互相正交的子载波上传输。
It copies the original data stream to several parallel data streams, spreads them in both time and frequency domain, then modulates them to orthogonal sub-carriers for transmission.
介绍了数据采集系统的硬件组成和软件设计流程，以TMS320F206为控制核心，实现了多路数据的采集、转换、分析和处理。
This paper presents the hardware and program design of a data sampling system based on TMS320F206 microcomputer, which enables us to sample, convert, analyze and process the multiple input data.
介绍了数据采集系统的硬件组成和软件设计流程，以TMS320F206为控制核心，实现了多路数据的采集、转换、分析和处理。
This paper presents the hardware and program design of a data sampling system based on TMS320F206 microcomputer, which enables us to sample, convert, analyze and process the multiple input data.
应用推荐