重点介绍了通过软件设计由FPGA来实现PC104总线数据传输控制;
This paper emphasizes on using FPGA realizing the data transmission control of PC104 bus through the soft-ware.
WCDMA协议栈中的无线链路控制(rlc)层是负责数据传输控制的协议层。
RLC Layer in WCDMA protocol stack is in charge of data transmission control.
同时给出了GPRS远程数据传输控制的方案,为抽油机的遥控遥测及集中控制提供了条件。
It presented a control project of the GPRS remote data transmission which provides probability of remote control, telemetry and centralized control to the pumping units.
本设计采用模块化设计的思想,将GPIB接口IP核分成三个模块:GPIB接口功能模块、内部寄存器模块和数据传输控制模块。
Based on the theory of modularization, the IP core of GPIB is divided into three modules: module for port function of GPIB, module for inner register and module for data transmission.
由于协议栈执行的控制少,其优点是处理时间短、延时少,而且数据传输更快。
The advantages are lower processing, lower latency, and quicker data transfer due to less controls being performed by the protocol stack.
整个灌溉系统的所有组分都有微型控制器,通过它将运行中的状态数据传输到控制它们的能源管理系统中。
All of the irrigation system components have micro-controllers that transmit their status data to the energy management system that controls them.
对于网络压缩统计数据,我们使用FTP运行该测试以进行控制,确定数据传输如何影响网络。
Regarding the network compression statistics, we ran the tests using FTP as a control, to determine how the network was affected by a transfer of data.
这几个模块是汽车驾驶模拟器系统中的控制核心,分布式交互系统中数据传输的核心,以及虚拟交通场景的重要组成部分。
These are the core of the control system in driving simulator and data transfer in distributing interactive system, and an important component of virtual traffic scenes.
这种接口采用点对点架构,外周设备协商解决总线冲突问题,以确定哪个设备控制数据传输最佳。
This interface uses a peer-to-peer architecture in which peripherals negotiate bus conflicts to determine which device can best control a data transfer.
包括卫星通信的数据传输技术可用于金融控制和电子银行业务。
Data transmission techniques including satellite telecommunications have applications in financial control and electronic banking.
集中器到控制中心之间采用GPRS网络进行数据传输。
Data transmit through GPRS (General Packet Radio Service) network between concentrator and control centre.
这些新技术包括地震波形数字化的过采样技术,数据传输中使用的紧缩频谱调制技术和差错控制技术等。
The new techniques include oversampling technique in digitalization of seismic wave form, spectrum contraction technique in data - transmitting and error-controlling and so on.
考虑到现场的环境干扰较强,对总线电缆及CAN控制器、驱动器采用了冗余设计,保证数据传输的可靠性。
Considering strong disturbance environment in the field area, redundant design in bus cable, CAN controller and driver is involved to assure the reliability of data transmission.
第四章讨论总线管理,阐述了数据传输、流量控制和差错控制在网络式仪器总线中的实现。
In chapter four, describes the bus management, and discussed the implementation of data transfer, flow control and error control in the network-stye instrument bus.
VME总线控制器是VME总线系统的关键设备,具有完整的VME总线数据传输能力。
VMEbus Controller, which has the complete data transfer capability, is the key device of the VMEbus system.
到飞机上各种仪表的控制。从计算机的网络通讯与数据传输。
Various instruments on the aircraft to control from a computer network Communications and data transmission .
通过在单片机方和PC机方制定相应的通讯协议,该卡能直接用于采用计算机技术、对要求数据传输速率比较高的工业现场控制系统中。
By making relative communication protocol in the SCM and the same in the PC, the card can be directly used in an industrial field control system with highspeed data transmission.
并在此基础上,详细介绍了数据链接、控制器、频谱分析、远程数据传输等几种典型模块。
And it has introduced such several kinds of typical modules as data acquisition, Controller, Frequency spectrum analysis and remote data transmission, etc.
其中包括全自动快速分析系统的特点、设备及网络构成、快速分析工艺控制和数据传输通信等内容。
Feature of full automatic quick analysis system, equipment and network structure, quick analysis process control and data transmission communication etc are described.
实际运行显示,本系统工作稳定,数据传输可靠,控制实时性好。
The running results show that the system is reliable in data transfer and accuracy control.
TCP是通过IP网络提供数据传输的协议,IP是一个包含寻址和控制信息,允许数据路由的协议。
TCP is a transport protocol providing transmission of data over IP networks, and IP is a network protocol containing addressing and control information that allow for data to be routed.
工业控制网络对网络的实时性要求很高,不仅要求传输速度快,数据传输还要具有确定性。
Industrial control net is a special applicative network, it demands high desired real time processing and deterministic.
对各DSP间的连接方式、数据传输和软件控制进行了分析。
The connecting way among each DSP and data transmission and software control are analyzed.
其中USB总线接口芯片CH375是这一部分的核心,选择并控制USB总线的数据传输方式使之适合是本课题的关键部分。
The core of this part is the USB interface chip-CH375. Choosing and controlling the working style of the chip is the emphasis of the thesis.
该方案通过采用双dsp、嵌入式rtos及合理任务划分策略保证了系统的实时性要求,并将网络数据传输率需求控制在可行范围内。
Through using two DSP, embedded RTOS and reasonable task-assigned strategy, the system demand for real time and data transmission speed of network are ensured.
在传输了控制和信令比特后,数据传输通道的带宽全部供终端用户使用。
The bandwidth of a data transmission path available to end users after control and signaling bits are accounted for.
本文介绍了差错控制的三种方案,对现有的移动通信系统和将来的移动通信系统数据传输中应用的差错控制技术做了简要介绍。
This paper presents three error-control solution and gives a brief introduce of the technique of error control used in mobile data transmission system in use and future.
本文主要研究了TCP/IP协议族,并对完整的TCP/IP协议族进行一定程度的删节,既满足应用系统对数据传输和控制等功能的实际需要,又能嵌入到8位单片机内。
This paper mainly studies TCP/IP protocol family and abridges some of it, this not only satisfies the demand of data-transmitting and controlling of apply system, but also embeds in 8 bit singlechip.
在网络控制系统中,网络不仅是控制系统的数据传输的一种媒介,同时也是控制系统的一部分。
In networked control system, network is not only one medium through which data of control system can be transmitted but also one part of control system.
根据集中供热的实际情况,设计了换热站自动控制和GPRS远程数据传输系统。
Based on the practical situation of centralized heating supply, the auto-control system and GPRS remote data transmitting system for the heat-exchange station were designed.
应用推荐