一个多工器有可能是设计以多样数字输入的线路和符合的控制线路。
A multiplexer can be designed with various Numbers of input lines and corresponding control lines.
数字控制器可以控制使用一个本地温度，其输出可以是任何行业标准相匹配的电源控制器的用户可配置的模拟输入。
Digital controller can be used with a local temperature controller, the output of which can be any industry standard matched to the power controller's user-configurable analog input.
利用数字输入，控制器可以确定外部数字信号的状态。
The digital inputs allow the state of external digital signals to be determined by the controller.
举例来说，步进电机需要输入一系列数字脉冲信号来控制电机的位置和速度。
For example, a stepper motor requires a series of digital pulses as an input to control the motor position and speed.
研究了在数字最优预见控制中，输入权重对评价函数的影响，给出了两者的函数关系，最后进行了仿真验证。
The influence of input weighting on evaluation function in digital optimal predictive control is investigated. Its function relation derived has been proven by simulation.
由于在补偿方法中采用了数字滤波和样条插值技术，使得所建立的控制系统对任意的输入作用都具有良好的稳定性和补偿效果。
Since digital filter and spline interpolation technique have been adopted in the compensation method, the developed control system is both stable and effective to arbitrary input signals.
该软件支持离散控制完全的数字输入和输出(DIO)-这有助于设备经理关掉不需要的负载。
The software supports discrete control thorough digital inputs and outputs (DIO) - this helps the facility manager to switch off loads that are not required.
用两种不同的方法推导出单输入线性数字系统最小能量控制的闭环表达式。
This paper describes the closed-loop expressions of the minimum energy control for the single-input linear digital system.
所设计的芯片是32个输入32个输出的交叉点开关阵列，每一个输出都能连接任何一路输入，采用串行数字控制方式。
The chip is a crosspoint array with 32 outputs, each of which can be connected to any one of 32 inputs. The chip is programmed in serial mode.
本文给出了在这种情况下的输入多采样率数字控制系统的鲁棒稳定性判据，所得出的结果具有一定的实用性和较少的保守性。
Several stability robustness criteria for this kind of input multirate sampling digital control systems are given in this paper. These criteria are useful and less conservative.
微程序设计是当数字系统中控制器输入变量较多时适用的一种设计方案。
Microprogramming is a design method applicable to the controller of digital system which has more input variables.
最后，结合燃油控制，分析了数字电子控制器的输入和输出参数的特性及功能。
At last, the paper analyses the character and function of the input and output parameters to the digital electronic controller.
该集成电路通过对数字输入端口的输入数据的调节，灵活的控制了高压开关集成电路输出信号的频率和脉宽。
This integrated circuit control the frequency and pulse width of the high voltage IC output signal conveniently by adjusting the input date of IC digital input port.
控制模块对转向器输入端正反转，液压缸的向前、向后加载，内泄油杯放油等数字量控制。
The hydraulic motor, hydraulic cylinder and oil cup are controlled digitally in the control module.
提出了两种模拟二极管正向导通输入输出特性的数学函数，进行数字序列峰值因数的控制。
Two input-output soft-clip functions that mimic the diode full-wave soft clipping have been designed to control the peak factor of digital sequences.
涡扇发动机数字模型包含10个状态变量、12个量测量、6个控制输入量以及8个健康状况参数。
The digital turbofan engine model contains 10 state variables, 12 measurements, 6 control inputs and 8 component health parameters.
突出显示：有没有数字输入的，甚至没有滑动控制。
The highlight: There is no typing in of numbers, not even slide controls.
并通过数字式和模拟式的输入和输出，控制各种类型的生产过程。
And through digital and analog inputs and outputs to control various types of production process.
用两种不同的方法推导出单输入线性数字系统最小能量控制的闭环表达式。
This paper describes the closed-loop expressions of the minimum energy control for the single-input linear digital system. They are obtained by two different methods.
本文还对汇流条控制器的模拟量输入通道、数字量输入通道、数字量输出通道进行了自检测设计，包括硬件BIT设计和软件实现方法。
The built-in test (BIT) design of hardware and software is also introduced in this dissertation. The BIT design consists of analog inputs, digital inputs and digital outputs.
电控系统由设定器（上位机）、数字控制器、输入通道（位置检测）和后向通道（执行机构）构成。
The control system is composed of setting unit(host computer ), digital controller , input channel (position detector)and output channel (actuating mechanism).
数字屏可以进行多个触摸位置的采集输入，实现复杂的操作控制。
Matrix panel can provide multiple touch action data simultaneously, and this can result in complicated operation.
介绍了一种利用EDA技术，实现步进电机控制系统数字输入的方法，从而实现了对步进电机的精确控制。
In this paper, first a digital input technique about stepmotor based on EDA is introduced. By using this technique the stepmotor can be controlled accurately.
介绍了一种利用EDA技术，实现步进电机控制系统数字输入的方法，从而实现了对步进电机的精确控制。
In this paper, first a digital input technique about stepmotor based on EDA is introduced. By using this technique the stepmotor can be controlled accurately.
应用推荐