介绍了一种基于TMS320C 6713和FPGA的数字电源控制模块，给出了模块的硬件组成和软件设计。
Digital power controller based on microprocessor TMS320C6713 and FPGA is introduced. At the same time, the constitution of the hardware and software are introduced too.
数字控制器可以控制使用一个本地温度，其输出可以是任何行业标准相匹配的电源控制器的用户可配置的模拟输入。
Digital controller can be used with a local temperature controller, the output of which can be any industry standard matched to the power controller's user-configurable analog input.
根据焊接现场条件，建立数字化电源控制器的试验测试环境。
By simulating the field condition, the testing environment of the digital power source controller is established.
典型的寿命测试系统包括一台通信分析仪、电源、一个手机控制器、音频测试仪器和一台数字多用表（DMM）。
A typical lifetime test system includes a communication analyzer, power supplies, a handset controller, audio test instruments, and a DMM.
因此，我们可以申请我们的数字电源和运动控制的知识，提高他们的成功。
So we can apply our knowledge of digital power and motion control to enhance their success.
控制系统主要由电源电路、数字控制电路和机械控制电路三大模块构成。
Hardware system is made up of three modules: power supply circuit, digital control circuit and machine control circuit.
单相电力电子控制器从斯潘851数字晶闸管电源提供软件的最新数字信号处理（DSP）技术和。
The Single-Phase 851 Digital SCR Power Controller from Spang Power Electronics offers the latest in Digital Signal Processing (DSP) technology and software.
介绍基于脉宽调制芯片TL 494的高压电源的工作原理，其电压可由单片机控制的数字电位器进行调整。
Principle of high voltage power supply based on PWM chip TL494 is introduced in this paper. The adjustment of the voltage is performed by digital potentiometer controlled by MCU.
定时电路一般由电源模块、面板电路和定时板组成，是功率源中的数字控制部分。
Timing circuit is usually made up of power supply unit, panel circuit and timing board, it is the digital control part of power source.
利用数字电位器ds1867实现了对激光器电源内部电阻的控制，从而改变激光器发射功率等级的目的。
This laser power can control adjustable resistance internal to change the level of transmitting power using the digital resistance DS1867.
用数字信号处理器(dsp)和复杂可编程逻辑器件(CPLD)设计了IGBT感应加热电源控制系统。
The control system of IGBT induction heating power supply is designed based on DSP (digital signal processor) and CPLD (complex programmable logic device).
提出了一种新型分布式控制方法来实现单相数字模块化ups(不停电电源)的并联运行。
A novel distributed control scheme is proposed for the parallel operation of single phase digital controlled UPS (uninterrupted power supply).
控制系统以16位数字信号处理器TMS320F 240为核心，对整个电源进行了实时的闭环控制。
To realize real time closed loop control, high performance 16-bit DSP TMS320F240 is adopted as control kernel.
变速恒频电源数字控制技术以dsp作为控制核心，主要实现对变换器的控制和发电系统电压调节，同时也实现了系统保护功能。
Digital control of VSCF power system, which USES DSP as its control core, realizes the control of inverter and voltage regulator, as well as the system protection.
数字信号处理器(dsp)已经广泛应用于电机控制、开关电源等领域。
Digital signal processors (DSP) have been extensively used in areas of motor control and power switch supply control system.
该电源采用数/模混合控制及重复控制方法，数字部分实现高精度的波形发生器和电压有效值控制；
The power supply adopts D/A mixed control and repetitive control. The digital part realizes the high precise waveform generator and the control based on voltage virtual value.
基于感应加热研究现状，利用微机对中频电源控制电路实现了数字化。
On the basis of the study situation of induction heating, the digitization of the rectification control circuits of medium frequency power supply is achieved by using microcomputer in this paper.
此方案中的电源系统由数字控制电路、电流叠加开关和恒流源组成。
In this plan, the power source system was make up of by the digital control circuit part and current adding switch part and constant current source part.
随着科学技术在焊接领域应用的不断深入，数字化技术和波形控制技术在弧焊电源中的应用也越来越广泛。
With the further application of advanced technology in the welding field, the digital technology and wave controlled technology have been widely applied in the arc welding power.
实验结果表明：采用了本文设计的数字化控制技术的逆变电源，可以获得稳定的正弦电压输出。
It is shown by the experimental results that the inverter power supply with digital control technologies designed by this dissertation can output steady sine voltage.
为了使陀螺电源的性能指标优良，采用基于DSP的全数字化控制系统。
We adopt the digital control system based DSP in order to improve the performance specifications of gyroscope power.
主要介绍CPCI数字存储示波器模块的模拟通道设计、A/D采样设计、数字控制电路设计、电源设计以及CPCI接口设计。
The hardware design of the module mainly presents analogue channel circuit design, A/D acquisition circuit design, digital control circuit design, power and CPCI interface design.
通过这种设计方案，实现了感应加热电源的数字化控制，并给出了相应的软件框图。
The digital control of induction heating power supply was implemented through this design approach, and the software chart was illustrated as well in this paper.
本文以滑模变结构为控制核心，研制了以DSP为控制芯片的全数字化全桥移相软开关电源。
This paper presents a digital controlled full bridge ZVS PWM switching power supply, which is based on sliding mode control method by using DSP.
最近几年以来，数字技术在电源控制方面的应用是电源工业最重要的变化之一。
The application of digital technology to power supply control is one of the significant changes in power electronics industry in the recent years.
数字控制的时延补偿应用于直流开关电源中获得了较好的控制效果。
The time delay compensation of digital control for DC switch-mode power supplies improves the control effect.
介绍了一种高频串联谐振充电的固体脉冲激光电源及其数字化控制恒流充电技术。
This paper introduces a high-frequency series resonant charing method of solid pulsed laser power source, basing on constant current charging of digital control technology.
该平台具有强大的在线开发功能，适合于各种数字化电机控制系统和数字化电源控制系统的研究和开发。
The platform is a powerful online development tool. It is suitable for research and development of many kinds of digital motor control systems and digital power control systems.
文中在分析数字处理器的工作特点的基础上，提出一种适合于数字控制电源系统的建模仿真方法。
This paper offers a method of modeling and simulating for digital controlled power supply system, on the basis of analyzing the feature of how datum are processed in digital processor.
文中在分析数字处理器的工作特点的基础上，提出一种适合于数字控制电源系统的建模仿真方法。
This paper offers a method of modeling and simulating for digital controlled power supply system, on the basis of analyzing the feature of how datum are processed in digital processor.
应用推荐