构造了双螺旋转子几何特性数字化设计软件方案，实现了双螺旋转子几何特性的自动计算与输出。
Digital design software scheme of the geometry character is set up, and automatic calculation and output of the geometry character of the twin - helical rotors is implemented.
数字化实验室系统的软件设计。
玻璃纤维和聚酯树脂使用了数字化软件制作，但是在场地上使用了手工方式，给工人们机会去参与设计。
The fibreglass and polyester-resin furniture was designed using digital software but handmade on site, giving workers a chance to have input on the design.
在开发夹具数字化手册软件基础上，分析了夹具网络协同设计系统的体系结构和数据流程，建立了基于ASP的系统模型。
On the basis of exploitation of digitized fixture design handbook, analyzed the framework and data flow of the fixture network collaborative design system, and set up system model based on ASP.
文章介绍了一种数字化的矿用本质安全型ups的工作原理、硬件、软件设计。
The paper introduced working principle, design of hardware and software of a digitized mine-used intrinsically safe UPS.
基于以上分析，进行了滚转控制通道数字化研究，完成了基于TMS320 LF 2407芯片的DSP硬件和软件设计。
The digital of roll is studied on the base of above study, the designing of DSP hardware and software is completed by TMS320LF2407.
本文介绍了基于软件无线电思想的雷达中频数字化接收机的设计与性能分析。
This paper introduces the design and analysis of software radio mind based IF digital radar receiver.
在该系统设计中，以FPGA芯片作为核心器件，通过底层软件编程实现高强度聚焦超声的数字化相位调控。
In the system design FPGA slug as a key device realizes digital phase control of high intensity focused ultrasound through base software programming.
介绍一种用TMS320F 2812实现的在线式UPS的全数字化控制系统，给出系统的硬件结构及软件设计方案。
A fully digital controlling system of the on-line UPS by using a TMS320F2812 is introduced, and its hardware structure and software design are proposed.
箱包手袋业：设计、出格、算料CAD软件、数字化仪、纸样切割机、电脑裁皮机；激光雕刻与切割机。
Cases and handbags: Design, style and count CAD software, digital instrument, paper sample cutting machines, computerized leather tailoring machines; laser engraving and cutting machines.
通过这种设计方案，实现了感应加热电源的数字化控制，并给出了相应的软件框图。
The digital control of induction heating power supply was implemented through this design approach, and the software chart was illustrated as well in this paper.
基于软件无线电思想介绍了一种可行的中频数字化接收机系统设计方案。
A feasible digital intermediate frequency receiver based on software radio technology is presented in this paper.
箱包手袋业：设计、出格、算料CAD软件、数字化仪、纸样切割机、电脑裁皮机；激光雕刻与切割机。
Cases AND hANDbags: Design, style AND CAD software, digital instrument, paper sample cutting machines, computerized leather tailoring machines laser engraving AND cutting machines.
第二章在分析应用软件无线电技术优势的基础上，提出了一种全数字化超宽带接收器的设计方案。
In the second chapter, at the foundation of analysis of the application software wireless technology's advantage, a plan of all digital Ultra-Wideband receiver is brought forward.
为数字化产品设计过程的模型化、规律化及其计算机软件支持工具的开发提供了有益的探索。
A useful exploration of modeling of product design process based numeralization and development of a computer supported implement for process of product design has was made.
软件无线屯的设计思想之一是将A／D转换器尽可能靠近天线，即把A／D从基带移到中频甚至射频，把接收到的模拟信号尽早数字化。
One of the important conceptions of Software Radio is to make A/D converter close to antenna, we should convert IF analog signal even RF analog signal into digital signal.
最后，提出了数字化故障录波器的硬件选型、软件流程等设计，并提出目前较为合理的过程层数据格式标准方案。
Finally, the hardware selection and software process of digital fault recorder were expatiated and put up with a more reasonable data format standard of the process level.
摘 要 ：提出了一种基于软件无线电思想的接收机中频数字化系统设计方案。
This paper presents the blue print of a kind of IF digital system based on the technology of software radio.
详细介绍了系统的硬软件设计，由于采用了ISP1032-80芯片及89C52单片机，实现了系统的数字化、集成化，具有测量精度高、跟踪速度快、抗干扰能力强等特点。
The hardware and software of the system was introduced in details. The ISP1032-80 and 89C52 chip were used to implement the digital and integrated system so that the device has the me…
全数字化接收机是实现软件无线电技术的重要基础，本文研究基于可编程四通道数字下变频器HSP5 0 2 16实现高频地波雷达数字接收机设计的若干关键技术。
The fully digitalized receiver is the important basis for software radio. Some key technologies about how to realize the HF ground wave radar receiver based on the HSP50216 are addressed.
针对导弹武器系统模拟测试方案存在的不足，提出了基于现场总线的数字化测试方案，文中从硬件和软件方面给出了惯性测量组合测试节点与 CAN 总线的接口设计。
We put forword one Check-up and control system based on CAN-bus, and introduced its whole structure, hardware collocation, software Collocation, interface-circuit and so on.
摘要目的自主研究计算机辅助设计制造（CAD/CAM ）导板的数字化设计方法，完成软件设计，创新性地加入了力学分析功能。
Abstract : Objective To carry out independent research with the method of selfdesign CAD/CAM for implant guide.
摘要目的自主研究计算机辅助设计制造（CAD/CAM ）导板的数字化设计方法，完成软件设计，创新性地加入了力学分析功能。
Abstract : Objective To carry out independent research with the method of selfdesign CAD/CAM for implant guide.
应用推荐