类似的工作仿真了在进入轨道期间管理火箭引擎点火的运载火箭数字计算机(LaunchVehicle Digital Computer,LVDC)。
A similar effort simulates the launch vehicle digital computer (LVDC) that managed the firing of the rocket engines during ascent into orbit.
本文给出了一种宽带恒定束宽数字波束形成器的实现方案，计算机仿真结果表明了该方案的有效性。
Here a scheme to implement broad-band constant beamwidth digital beam-former has been presented. The results of computer simulation show the scheme is effective.
利用红外数字导引新方法，使用单片微型计算机，对自由路径AGV的导引和运动控制进行了模拟仿真。
A new infrared digital guiding method is used. AGV's motion guiding and controlling simulation in free path are completed by using single chip microcomputer.
本文通过大量的计算机数字仿真实验，研究了无冲量自由飞行轨迹与单个小冲量飞行轨迹的转移时间。
Through a large number of computer digital simulation experiments, this paper discusses the shift time of free flight and little single impulse individually.
着重讨论了雷达测速系统中的数字测角原理和算法，以给出了目标角度修正公式和计算机仿真结果。
This paper emphatically discusses digital measuring-angle theorem and algorithm in radar measuring-speed system. It also provides Angle correction formulas of a target and computer simulation results.
阐述了流量放大器的工作原理，建立了流量放大器的静动态数学模型，并利用计算机进行数字仿真。
The principle behind the flow amplifier is described and the static and dynamic mathematical models is established. On this basis, digital simulation is implemented on a computer.
在机械仿真软件ADAMS基础上，用计算机建立了月球微重力环境并进行了数字仿真。
Based on ADAMS mechanical simulation software, a microgravity environment was established by computer and some simulation study had been carried out about the lunar lander.
提出了数字电液比例系统的数学模型及控制规律，并进行了计算机仿真及实验验证。
Mathematical model and control law of the digital electro hydraulic proportion system are put forward. Furthermore, computing simulation and experimental verification are carried out.
为了保证进行实时仿真，并行数字计算机的计算步长除与对象复杂程度有关外，还与所选数字计算机数目有关，选取较小步长必须使用较多计算机。
To ensure the real-time simulation, the step length of the parallel digital computer must be related not only to the complexity of the object but also to the number of the bigital computers selected.
整个控制器具有良好的鲁棒性和精确度，辅助计算机数字仿真表明，此种控制算法具有广阔的应用潜力。
The whole controller has good robustness and precision property. Digital simulation expressed that the control algorithm has a for further application future.
随着三维数字化技术及计算机图形学的飞速发展，仿真技术在医学领域也有越来越多的应用。
With the rapid development of the three-dimension digitized technology and Computer Graphic, simulation technology has more and more application in the medical field.
作为实例设计了单机——无穷大系统中机组PSS的参数，计算机数字仿真表明，本方法设计效果良好。
Using this method the PSS is designed for a single machine-infinite bus system, and the results of digital simulation show that this method is very effective and useful.
用计算机仿真的方法在数字用户环路上实现了该算法，并测定其数字用户环路上所能获得的最大传码率，分析最大传码率与发送总功率的关系，给出比特分配结果。
On the digital subscriber loop we realized the algorithm, got the max receiving bit, analysed the relation between the max receiving bit and transmitted power, and got the result of bit allocation.
给出了采用变转速泵控闭式回路控制差动缸的原理，建立了该系统的数学模型，进行了计算机数字仿真研究。
In this paper, the principle of variable speed pump control hydraulic differential cylinder is designed, and the simulation model of system is built, and the simulation research is carried out.
本文建立了水轮机引水部件多目标水力优化的数学模型，并进行了计算机数字仿真。
The mathematical model is established for the multi-objective hydraulic optimizations of the diversion components of hydraulic turbines, and the computer simulation is carried out.
把计算机数字仿真技术运用于生产过程的PID控制系统中，实现对控制系统的最优化控制，是信息技术应用于控制系统的一个范例。
The computer simulation technology, which applied to optimize control of PID control system, is a good example that control system was reformed with information technology.
把计算机数字仿真技术运用于生产过程控制系统中，实现生产过程的最优化控制，是信息技术改造传统产业的一个范例。
The computer simulating technology applying to optimization control of pharmaceutical processes is a good example that traditional industry is reformed with information technology.
将计算机数字仿真技术引入聚驱井管杆偏磨失效模糊可靠性分析中，把模糊可靠性的分析范围扩展至机械系统。
The side-abrasion failure of rod string for polymer drive pump wells is analyzed by using computer simulation method. The extension of fuzzy reliability analysis is expanded to mechanical system.
并对装设有svc的两区域四机电力系统进行计算机数字仿真，结果表明基于神经网络逆系统方法设计出的复合非线性控制器可以有效地改善SVC控制性能。
The simulation of the two-area four-machine SVC system verifies that the compound nonlinear controller designed by the proposed method can effectively improve the control ability of SVC system.
分析和仿真实验结果表明：该数字触发器通用性能好，可用于计算机控制的各种晶闸管系统。
Analysis and experiment results show that the properties of this digital trigger are very good and digital trigger can be used in various thyristor systems controlled by computer.
利用某种计算机程序，可直接把键图模型送入计算机进行数字仿真，无需事先由人工建立数学模型。
A digital imitation is made by using a computer program and sending directly the bond graph model into computer without establishing a mathematic model by manual in advance.
运用MATLAB语言进行数字仿真实验，介绍了MATLAB技术的概况及在微型计算机控制技术实验教学中的应用，阐述了MATLAB语言的作用、使用前景和意义。
Firstly, the general situation of MATLAB and the application in micro-computer control experiment is introduced; then the function, prospect and the significance of MATLAB language is expounded.
通过FIR数字滤波器卷积和操作的计算机数值仿真表明，采用这些方法运算得到的结果与传统二进制算术编码算法完全等效，可应用于混沌信号处理系统。
By computer simulation with convolution sum of FIR digital filter, the results show that the model is the same as traditional binary coding arithmetic which can be used in chaotic...
计算机仿真结果和现场可编程门阵列仿真结果表明，多相滤波的中频数字化接收机设计方法是可行的，并还可灵活地实现现有专用芯片很难实现的宽带接收技术。
The results of computer simulation and FPGA simulation indicate that a technique to design wideband digitized receiver based on polyphase filtering is feasible , and can neatly implement wid…
计算机数字仿真结果表明这种控制策略对具有未知或时变分数时滞系统是非常有效的。
The algorithm has not only PID control features, but also self-tuning control and optimal prediction features that may overcome the time delay. Simulation results indicate …
计算机数字仿真结果表明这种控制策略对具有未知或时变分数时滞系统是非常有效的。
The algorithm has not only PID control features, but also self-tuning control and optimal prediction features that may overcome the time delay. Simulation results indicate …
应用推荐