DOE的相位分布由数值迭代相位恢复算法优化得到。
The phase distribution of DOE is optimization result of iterative phase retrieval algorithm.
最后，通过采用数值迭代算法，实现锅炉热力计算程序的全流程自动迭代计算。
At last, by the use of numerical iterative algorithm, the automatic iterative process of boiler's thermodynamic calculation is achieved.
本方法采用解析表达式、用数值迭代计算法解决给定的问题，是一种精确的方法。
This proposed method USES mathematic expressions and iterations to solve the problem, and it is a reliable and accurate method.
中文摘要利用FOX-LI数值迭代解法，对平面平行腔的柱面波进行数值求解。
Using the FOX - LI numerical iterative method of planar parallel cavity, cylindrical wave numerical.
条带屈服模型预测较准确但需要数值迭代求解，计算量大，且程序复杂，不利于工程应用；
Of these, the strip yield models can make precise predictions for the overloading effect, but they are too complicated for engineering applications.
据此并考虑钢结构的阻尼比，运用数值迭代寻优技术，得到了可供工程设计采用的设计参数。
On the basis of the formulae and in the consideration of the damping ratio of tall steel structure, the design parameters were given for the engineering design using iterative technique.
文中给出了融合系统检测性能最优化的必要条件，以及求解最优系统判决规则的数值迭代算法。
The necessary conditions for optimum detection for the distributed detection systems are derived, and a numerical iterative algorithm for obtaining the optimum sensor decision rules is presented.
文中给出了融合系统检测性能最优化的必要条件，以及求解最优系统判决规则的数值迭代算法。
The necessary conditions for optimum detection for the distributed detection systems are derived, and a numerical iterative algorithm for obtaining the optimum sensor decision rul...
针对传统的理论优化方法如策略迭代、数值迭代不能适用于大规模系统的问题，我们采用仿真方法。
Because traditional theoretical methods such as policy iteration and value iteration can usually not be used to optimize large-scale systems, we rely on simulation methods.
在非理想信道条件下，推导了两部传感器的最优判决规则，并给出了求解最优判决规则的数值迭代算法。
The necessary conditions for optimal sensor decision rules are derived, and a numerical algorithm is designed for finding the optimal sensor decision rules.
文中采用数值迭代法和建立等效电流模型，对P_B层结构参数和门极-阴极几何图形尺寸进行了合理设计。
Reasonable designs of the structure parameters of PB layer and the gate-cathode geometry are obtained by numerical iteration and an equivalent current model.
风场数值模拟的预测效果，不仅取决于湍流模型与数值迭代方法，还强烈依赖于离散网格的质量及布局的合理性。
The rationality of numerical prediction results not only depends on the turbulent model and iterative numerical method adopted but also on the quality and layout of the division grid.
限定了目标点井眼方向的三维圆弧型井眼轨道设计模型是一个非线性代数方程组，通常需要使用数值迭代方法进行求解。
The borehole trajectory design to be drilled well with defined direction needs to solve a set of 7-element nonlinear equations.
在考虑结构阻尼的情况下采用数值迭代方法，给出了TLD系统最优参数的实用设计方法及结构-TLD系统的设计步骤。
The practicable design method is given by using the iterative method in the consideration of the damping of the structures. The design steps for the structure-TLD system are also proposed.
通过运用吴消元法求解电力系统潮流方程，求得了全部实域精确解，同时避免了因以数值迭代方法求解出现雅可比矩阵奇异的现象。
By using Wu s method, all the precise solutions of power flow equations are worked out without encountering the numerical difficulty of ill-condition.
将迭代次数降到10，加速的倍数也成比例降低（但对神经网络的识别能力无效），迭代的中间数值也会如此变化。
Reducing the iterations as low as 10 showed proportional speedups (but worthless neural net recognition), as did intermediate numbers of iterations.
数值计算表明，这种方法可以降低方程的迭代次数约40%，并明显减少方程的求解时间。
Numerical results present that this method can decrease the number of iterative by 40% and reduce the computation time greatly.
假定Iw是产生可运行软件的迭代数值，I t是总的迭代数，跟前面的一样。
Where Iw is the number of iterations that produced working software and it is the total number of iterations, as before.
数值计算表明，这种方法可以降低方程的迭代次数约35%，并明显减少方程的求解时间。
Numerical results present that this method can decrease the iterative number by 35% and reduce the computation time greatly.
矩阵迭代法是求矩阵的第一阶特征值与特征向量的一种数值方法。
Matrix iteration method can be employed to figure out the first eigenvalue and eigenvector of a matrix.
因此，ITERATION_ITEMID应该配置为迭代的一个参数，该参数值来源于报表参数或者TopWorkItems数据集。
Thus, the ITERATION_ITEMID should be configured as a parameter for Iteration, with the parameter value sourced from report parameters or the Top Work Items data set.
最后建立起受约束非线性控制系统求解的迭代算法，并给出相应的数值例题。
Finally the iterative algorithm is established for the solution of the constrained nonlinear control system, the corresponding numerical example is given.
大量数值实验结果表明，本文迭代过程收敛性好。
The result for large number of numerical experiment has showed that the iterative process has good convergence.
最后给出一个求解最优平稳策略的迭代算法，并提供一个数值例子以表明该算法的应用。
Finally an iteration algorithm to find an optimal stationary policy is proposed, and an numerical example is provided to (illustrate) the application of the algorithm.
利用此迭代函数系统构造了一类分形插值曲面，并做了若干数值实验。
Using this IFS we construct a kind of fractal interpolation surface, and make some experiment.
本文主要运用一种具有全局收敛性的单调迭代法求解了一类非线性扩散方程的数值解。
This paper mainly studies the numerical solution of a class of nonlinear diffusion equations using a monotone iteration method with the global convergence.
一些直接迭代数值方法最佳逼近中描述这一章。
Several direct iterative numerical methods for optimal approximation are described in this chapter.
基于多重线涡模型（MLVM），本文建立了一种计算机时少、收敛性强的适用于大迎角涡流势流数值模拟的迭代算法。
A robust iterative method suitable for the numerical simulation of vortex flows at high angles-of-attack is established based upon the multiple line-vortex model (MLVM).
本文还研究了几种预条件技术，用于改善算子的条件数，进一步加速迭代，同时用数值结果对比了各自的优劣。
Some preconditioner technique is also studied to improve the condition number and further accelerate iterations, comparisons are made between them by numerical results.
应用差分迭代方法进行了数值求解，得到了液晶指向矢随不同的参数变化的曲线。
Finite-difference iterative method is used for numerical solution, and some curvatures varied with different parameters are obtained.
应用推荐