介绍内融冰式蓄冰桶改进的数值计算模型。
A numerical model is developed for an internal melt ice - on - coil thermal storage tank.
本文简要介绍了复合材料结构的数值计算模型的建立方法。
This paper presented several methods for establishing the model of composite structure by numerical method.
本文推导建立了砂岩基质酸化时，地层温度的数值计算模型。
A numerical model for calculating the formation temperature during acidizing the matrix of sandstone is derived and established in this paper.
采用的数值计算模型和方法适用于分析中心进气式固冲发动机反应流场。
Numerical calculation model and method are applicable to analyzing reacting flow field of the solid rocket ramjet with central air-inlet mode.
推导二维渠道温差异重流的数学方程，并建立了有限层带数值计算模型。
In this paper, the mathematical equations of two-dimensional thermal density flow in channel are developed and the finite layer numerical model is established.
建立了计算涡流室柴油机连接通道流量系数的热力学模型和二堆数值计算模型。
A thermodynamic and a 2-d numerical computational model are proposed for calculating the discharge coefficient of connecting passage of swirl chamber diesel engine.
建立选择性激光烧结粉末快速成形工艺过程的数值计算模型，并用于估算烧结深度。
Numerical computation model for the thermal process of selective laser sintering of powders were presented to predict the sintered depth in selective laser sintering.
数值计算模型和参数的确定，是三相同壳结构GIS快速暂态过程行波分析的基础。
Transient parameters and numerical calculation model are fundamental to evaluate the traveling wave on very fast transients in three-phase enclosed GIS.
分析了隧道火灾数值计算模型的理论基础，找到比较合适的隧道列车火灾建模方法。
The theoretical basis for tunnel fire numerical simulation is analyzed and the suitable tunnel fire model is selected and the.
该文从二维方腔流动的涡流函数方程出发，建立了方腔内热对流的非定常数值计算模型。
The numerical scheme for unsteady thermal convection flow in a square cavity is developed in this paper.
介绍了一个运用于摆式车辆的动力学性能仿真的数值计算模型，特别考虑了曲线通过工况。
A numerical model for the simulation of the dynamic behaviour of a tilting body railway vehicle is introduced, with particular attention to the curve negotiation conditions.
为快速有效地模拟三维波浪问题，采用高阶谱方法建立了完全非线性波浪的数值计算模型。
To simulate 3-d wave rapidly and effectively, a numerical simulation model of fully nonlinear waves was established using the high order spectral method.
采用有限元法建立了单热源合成炉和多热源合成炉温度场的有限元几何模型和数值计算模型。
The geometry models and numerical calculation models of temperature field in single-heat and multi-heat sources furnaces are established through finite element method.
建立选择性激光烧结粉末的快速成型工艺过程的数值计算模型，并用于估算热固结宽度和深度。
Numerical simulation model for the thermal process of selective laser sintering of powders was presented to predict the sintered width and depth in selective laser sintering.
描述分析了现有的钢筋混凝土数值计算模型，以及各类模型在几种常见商业软件中的应用现状。
The reinforced concrete numerical models and their application in some common commercial softwares are analyzed.
结果表明，本文建立的分区交界面数值计算模型是可靠的，可用于处理几何形状复杂的流场模拟。
The result shows that the numerical calculation model of interface of block-structured grids in reliable and can be used for complex geometry shape.
在淬火过程数值模拟基础上，进一步提出了回火过程的数值计算模型，其中着重考虑了应力松弛现象。
On the basis of the numerical simulation of quenching process, this paper further gives a numerical calculation model of tempering process, emphatically take the stress relaxation into account.
本文首先对散热器工作的物理机制进行详细分析分别对自然对流换热情况和强制对流换热情况建立了简化的二维数值计算模型。
At first, the physical mechanism was studied then the 2d compact numerical simulation model for natural convection and forced convection heat transfer analysis was built respectively.
大型水电工程的尾水隧洞中可能会发生明满交替流动，给电站过渡过程带来很大影响，需要建立合理可行的明满交替流动数值计算模型。
In tailrace tunnels of large hydropower station, a transient mixed free-surface-pressure flow may occur, which has a complex effect on the stability and transient of the power plant.
建立了燃料液滴在高温高压空气中燃烧过程的计算模型和数值方法。
The droplet combustion model and numerical method have been established and droplet combustion process has been calculated by using it.
利用本文数值模型的计算结果与他人的数值结果和试验结果进行了比较。
The computation results using the models in this thesis are compared with experimental data and other numerical results.
结合大功率柴油机性能强化的数值计算，在考虑螺纹的基础上建立了气缸盖螺栓的CAD装配体模型；
With the numerical simulation of heavy-duty diesel engine to strengthen performance, a CAD assembly model of cylinder head bolt is built based on the thread.
其计算结果将为渐开线齿轮设计、参数优化选择等提供参考数据，同时为齿根应力数值分析提供了新的数学模型。
The result will offer reference data for design of involute gear and optimization of parameter choice, and offer new mathematical model for numerical analysis of root stress.
针对模型的特点及其边界条件用差分法分别进行了数值计算，结果表明陷落柱氡气场的空间形态分布特征。
The numerical computations have been made using difference method for difference characteristics and boundary conditions. The computation results show the state features of radon field in space.
通过对火灾时烟气发生量及烟气流场的分析，建立了舞台空气幕计算的数学模型并求数值解。
Based on an analysis of the predicted volume and flow field of the smoke generated in case of fire, sets up a mathematical model and works out its numerical solution.
通过对火灾时烟气发生量及烟气流场的分析，建立了舞台空气幕计算的数学模型并求数值解。
Based on an analysis of the predicted volume and flow field of the smoke generated in case of fire, sets up a mathematical model and works out its numerical solution.
应用推荐