建立计算模型进行理论分析和数值模拟分析。
Building compute model, theory and number analysis is carried on.
通过数值模拟分析不同因素对激光多点点火的影响。
Through the numerical simulations we analyze the influence on laser ignition under the different factors.
编制了数值模拟分析与初始设计的汉化计算机软件。
And a Chines software for the related digital analog analysis and initial support design is introduced.
对环板行波管的导波特性进行了详细的数值模拟分析。
A detailed numerical calculation for the propagating wave's dispersion characteristics has been made.
项目价值遵循均值返回过程，其路径采用数值模拟分析。
The value of the project, whose path is simulated and analyzed numerically, follows a Mean-Reverting process.
最后结合数值模拟分析的方法，对模型试验的结果进行验证。
And combined with numerical simulation analysis, the result of the experiment on the model is validated.
三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
通过数值模拟分析了微粒散射对半透明流体层光谱吸收特性的影响。
The effect of particle scattering on the absorptive characteristics of a semitransparent fluid layer is investigated by the Monte Carlo method.
通过数值模拟分析，提示了厚煤层综放开采时顶煤运移和应力分布规律。
Through numerical simulation and analysis, the top coal movement and stress distribution in mechanized top caving mining of thick coal seam is revealed.
概要介绍了船用汽轮机进汽阀箱气动性能的数值模拟分析系统的构成及其应用。
This paper briefly introduces constitutes and application of numerical simulation analysis system of gas dynamic performance for marine turbines inlet valve box.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
通过数值模拟分析了蓄热体材质、换向时间、温度效率和热效率等的关联关系。
The relevant relations of regenerator medium, exchange time, temperature efficiency and thermal efficiency are analyzed by(numerical) simulation.
采用DEFORM软件对摩托车带爪齿轮坯进行了温精锻成形工艺数值模拟分析。
In this paper, the precise warm forging for finger gear blank of motorbike is numerically simulated using software DEFORM.
对于隧道施工过程的安全控制，采用FLAC进行数值模拟分析浅埋偏压隧道稳定性。
During the construction of tunnel, FLAC numerical simulation is used to analyse the stability of shallow tunnel under unsymmetrical pressure for safe control.
采用虚拟裂纹扩展法对焊接接头力学不均匀体的断裂参量J积分进行了数值模拟分析。
The virtual crack extension method has been utilized to simulate the J-integral of non-uniform welded joints.
通过数值模拟分析了影响残缺投影数据重建结果的主要因素：重建算法和投影间隔角。
The two major factors impacted the reconstructed results of incomplete projection data: reconstructed methods and the projection interval angle are analyzed by digital simulation method.
采用物质描述增量有限元方法，对露天与地下联合开采工程岩体进行了数值模拟分析。
With the finite element method of material description, the rock mass in underground and opencast united mining engineering was simulated and analyzed.
在数值模拟分析结果的基础上，对直齿轮的开放式成形工艺和模具结构进行了合理设计。
Based on the analytic results of the numerical simulation, the forming process and the mould structure for the spur-gear open-die forging were designed properly.
第二部分用STAR - CD流体软件对可变式进气歧管进行空气流动数值模拟分析。
The second part carries on the air fluid simulation analysis of variable intake manifold with the STAR-CD fluid software.
还通过数值模拟分析比较了传统再装期权与几何亚式一再装股票期权在经理激励中的作用。
This article also compares reload stock option with geometric Asian-reload stock option in the manager's role by numerical simulation.
在对岩体工程进行数值模拟分析时，岩体力学参数的确定是影响分析结果可靠性的关键步骤。
The mechanical parameters of rock masses are controlled by rock and structural planes, the determination of which is one key issue in numerical simulation of rock engineering.
由于封隔器卡瓦的尖齿结构，使卡瓦的理论分析、数值模拟分析和试验测试研究等都非常困难。
The accurate theoretic analysis, numerical simulation and measuring test of slip element were very difficult for oil packer systems because of the sharp teeth.
针对单层混凝土靶板和三层混凝土靶板进行数值模拟分析，确定了防护层数对工程防护能力的影响。
The effect of deck number on the protection ability is presented by thesimulation between single deck concrete target and triple deck one.
通过对现场观测和数值模拟分析，系统研究了断裂结构面对回采工作面矿压分布和顶板稳定性的影响。
By using field observation and numerical simulation method, the influence of fracture structure plane on the underground pressure and the roof stability of working face are systematically studied.
针对布沼坝露天矿西帮边坡出现的问题，对边坡中关键剖面进行数值模拟分析，获得了边坡的稳定性情况。
Aiming at the problem on west slope of Bu-zhao-ba Open pit, this research simulates the key section in the slope numerically and obtains the slope stability.
文章针对明孝陵四方城在车辆振动荷载下的安全性问题，应用有限元软件ANSYS进行了数值模拟分析。
In order to deal with the security of SIFANG CITY under vibratile load of busses, this paper does a simulative analysis for it with ANSYS.
数值模拟分析了新f M法拔长时，不同的砧宽比、料宽比及压下率情况下，刚端长度对应力分布的影响。
The influence of stiff length affecting stress distribution under different AWR, BWR and CR when stretching by NEM FM were simulated and analyzed.
就变化风速的送风口所产生的气流流型对外科手术室内的细菌浓度和人体热舒适的影响进行了数值模拟分析。
With numerical simulation method the effect of the airflow pattern created by the air inlet of varying velocity on contaminant concentration and thermal comfort in an operating room was investigated.
就变化风速的送风口所产生的气流流型对外科手术室内的细菌浓度和人体热舒适的影响进行了数值模拟分析。
With numerical simulation method the effect of the airflow pattern created by the air inlet of varying velocity on contaminant concentration and thermal comfort in an operating room was investigated.
应用推荐