提高了硬盘磨损，导致了故障率增加。
Increased wear of hard disks, leading to an increased failure rate.
现场实测结果表明，利用柴油机表面振动信号来诊断柴油机主轴瓦异常磨损故障是可行的。
The real detecting result shows that it is feasible to use the engine surface vibration signal to diagnose main bearing shell abnormal wear trouble.
文中针对基于油液分析的12150发动机磨损故障监测方法进行研究，给出了油液监测机理。
This paper is concentrated on the study of the wear fault monitoring methods and the monitoring principle of 12150 engines based on oil analysis.
将不会有「规划过的废弃」-指的是产品故意被设计成会磨损或故障。
There would be no "planned obsolescence, " where products are deliberately designed to wear out or break down.
在维修时，这个设备还可以用于下载数据显示磨损情况、故障或可能的故障。
In maintenance, this facility can be used to download data indicating wear, failures or likely failures.
时间的增长，齿轮泵会出现泵油不足，甚至不泵油等故障，主要原因是有关部位磨损过大。
With the growth of the use time, pump will appear pump oil shortage, don't even pump oil fault, the main reason is the related parts excessive wear.
实例表明，该方法能够有效地诊断出柴油机活塞缸套的磨损故障。
Actual applied instance indicates that this method can effectively diagnose the faults of piston-liner wear.
基于磨粒识别分析的结果，并结合摩擦学理论，实现对发动机磨损状态检测与故障诊断。
Depending on the result of debris analysis and combing with tribology knowledges, we can diagnose and predict wear fault of engine.
结合油液光谱分析的数据和发动机在实际中常见磨损故障现象，研制和开发了油液光谱分析诊断专家系统。
Combining the Spectrometric oil analysis data and the practical wear fault phenomena of the engines, the author has developed a Spectrometric oil analysis fault diagnosis expert system.
磨损规律和机械故障诊断等研究都离不开磨粒分析技术。
The study of wearing rules and mechanical fault diagnoses is based on wear particle analysis.
铁谱磨粒分析技术，可从微观角度对动态过程进行监测，以预测、诊断和及时处理非正常磨损早期故障。
The early malfunction of abnormal wear can be predicted, diagnosed and handled in time by using ferrography to monitor the running procedure from the microscopic view.
铁谱技术作为一种不解体的磨损故障检测与诊断手段，已愈来愈为众多专家、学者和工程技术人员所关注。
The ferrography, as a kind of non-disassembly fault detection and diagnosis method for wear abrasion, has been paid more attentions to the application by many experts and scholars.
利用铁谱分析技术和振动分析技术中的时频分析方法研究了模拟点蚀故障齿轮磨损与振动的关系。
The relation of wear and vibration of gear of simulating pitting fault was studied by using ferrographic analysis and the time and frequency spectrums of vibration analysis technology.
铁谱技术是以磨损磨粒分析为基础的故障诊断方法。
The ferrography is a fault diagnosis method based on the analysis of wear particle.
铁谱技术是以磨损磨粒分析为基础的故障诊断方法。
The ferrography is a fault diagnosis method based on the analysis of wear debris.
该文对该厂双螺旋输送机的输送能力及所需功率进行了核算，并介绍螺旋旋芯磨损严重、螺旋轴弯曲、串轴等故障进行技改的情况。
The transportation capacity and needed power of the conveyor are examined, with a description of the modification to the conveyor in its roller damage, axis bend, axis in series etc.
硫酸废热锅炉故障主要是由受热面管子的磨损、受热面的腐蚀、过热器爆管及焊缝漏水等引起的。
Abrasion and corrosion of heating surface, superheater tube cracking and weld leakage are the main cause of waste heat boiler breakdown in sulphuric acid plant.
根据耗损失效产品的渐发性故障模型，应用稳定磨损阶段的理论，提出了一种延拓试验方法。
Based on the gradually appeared failure model of wear-out failure, an extended test method is developed with the help of the stable wear stage theory.
本文根据我部长期对莱康明发动机金属屑故障的数据统计，详细分析了发动机挺杆座磨损的机理和多种成因，并提出了相应的改进和防范措施。
The paper analyzes in details the wear reasons of engine tappet rod and proposes the relative measures for improvement based on the statistical data on metal troubles from our department.
齿轮表面的疲劳磨损是齿轮故障的主要形式之一。
Fatigue wear on the surface of gear is one of the main kinds of failure of the gear.
比较常见的故障是阀杆与螺套上的丝扣磨损，陶瓷阀门使阀门无法关闭。
Failure is more common with the screw put on the Bellows Seal Valves threaded stem wear, so that the valve can not close.
国产300MW汽轮机主油泵推力瓦磨损故障近年来时有发生。
Domestic main oil pump thrust tile of 300mw steam turbine wears and tears the trouble, happen timely in recent years.
斜盘泵在发生滑靴副磨损故障时表现出与正常状态下完全不同的动态特性。
With the wear fault of the slipper pair, the dynamic characteristics of the axial piston pump are different from the normal state.
机械部件，不会磨损，老化和故障。
对滚动轴承磨粒磨损故障进行了模拟试验和振动信号的处理和分析。
Simulating test and vibration signal analysis for abrasive wear failure of rollings bearings have been made in this paper.
液压顶升系统(以下简称系统)液压元件磨损和密封件失效使系统产生超量内泄漏便是系统出现故障的主要原因。
The main reason for the defects is that the over leakage is produced in the system because the hydraulic components are worn down and the seals are failed.
诊断实例表明，用神经网络方法可以准确地识别出重型机械设备磨损故障类型、程度和部位。
The diagnosis example shows that this system can promote the accuracy and speed of wear particles identification.
诊断实例表明，用神经网络方法可以准确地识别出重型机械设备磨损故障类型、程度和部位。
The diagnosis example shows that this system can promote the accuracy and speed of wear particles identification.
应用推荐