为电网电容器组提供体积小、造价低，寿命长、安全可靠的放电设备。
The utility model provides a discharging device with the advantages of small size, low cost, long service life and safety for electric network capacitor banks.
所以一种使用方便，效果良好的充放电设备，对于蓄电池来讲时非常必要的。
Therefore one kind of easy to operate, the effect good charging and discharging equipment, says regarding the accumulator cell time is essential.
本文研究了正极不同压实密度对电池性能的影响。利用电池充放电设备，内阻仪等测量电池性能。
Applied battery charge-discharge instruments and inner resistance instruments positive electrode properties were investigated at different density.
将MAXIM公司生产的充电专用集成电路MAX713与单片机相结合，设计快速充放电设备，是现今充放电系统设计的主流。
Combining the specialized IC- MAX713 produced by MAXIM with MCU, to design quick charge & discharge device is the main trend of designing charge & discharge system.
本文介绍了利用井下强流脉冲放电技术疏通油井、提高产油率的基本原理及其关键技术，并研制出了一套油井疏通用脉冲大电流放电设备样机。
This paper describes the fundamentals and key techniques of an impulse discharge device with high current, which is used in underground oil well for plug releasing and enhancing production efficiency.
在纯电动版的车型中，那些排放管只是用于排放电子设备产生的废热。
In the pure plug-in version, those valves are for waste heat from the electronics.
声发射探测技术是监测由局部放电引起的液—固复合绝缘电力设备的突发性故障的有效方法。
Acoustic emission detection technology is an effective way to monitor sudden failure caused by partial discharge (PD) in liquid-solid composite insulation of electrical equipment.
由于电力设备工作环境复杂，局部放电信号的检测一直是局部放电研究重要组成部分，影响着进一步的故障诊断。
Because power equipment work in a complex environment, detecting partial discharge signal has been the important part of partial discharge study. Then it affects fault diagnosis of power equipment.
有些汽车装备了高强度放电前大灯hid，该设备通过其预先设计的电子系统产生的高压电弧放电生成高密度光源。
Some cars equipped with high strength discharge headlights HID, the device through its pre designed electrical system generated high voltage arc discharge generated high density light source.
电晕放电是一种发生在GIS设备外部的随机的脉冲形噪音信号。
Corona discharges are a form of stochastic pulse-shape noises occurring outside the GIS.
开发电晕放电烟气净化设备用防腐导电涂料，对涂层的导电特性进行了研究。
This paper developed a kind of anticorrosion and conductive coating for flue gas cleaning equipment by corona discharge and studied on the conductive characteristic of coating.
粉末静电喷涂设备中放电而电离空气的区域。
An area of ionised air formed by a discharge of electricity commonly used in powder electrostatic spray equipment.
实验结果表明，所提方法能剔除冗余的直流局部放电特征量，获取绝缘性能诊断规则，所得知识能很好地诊断电气设备绝缘性能。
The experimental results show that the proposed method can remove the redundant feature parameters of DC partial discharge and acquire the diagnosing rules for insulation performance.
文章介绍了一种用于工业设备的等离子体放电电源，给出了主电路、功率稳定电路的设计过程。
This article introduces a plasma discharge power supply for industrial equipment, and gives the design process of the main circuit and power stability circuit.
对研制设备的低压放电特性进行了试验研究和分析，并针对性提出低压放电防控措施。
Some experimental studies and analysis were carried out on the glow discharge characteristics of the developed equipment, and the prevention and control measures were proposed subsequently.
利用介质阻挡放电，在自行研制的设备上进行常压非平衡等离子体渗氮。
Using dielectric barrier discharge (DBD), atmospheric pressure non equilibrium plasma nitriding technology is under development at self made equipment.
XLPE电缆是电力系统中主要的输送电设备。局部放电是造成电力电缆绝缘层破坏的主要原因。
XLPE cable is the primary transportation equipment in electric power system and Partial discharge (PD) is the main cause which destroy electric power's cable insulated layer.
静电放电(esd)是许多电子设备必须承受的一种严重的电磁干扰形式。
Electrostatic discharge (ESD) is a kind of electromagnetic interference phenomenon that many electronic and electrical equipments must withstand.
局部放电是评定高压电器设备绝缘老化程度的重要参数。
Partial discharge is important parameter for evaluating insulation ageing of high voltage electric appliance and equipment.
保护设备电源系统免受雷击过电压、电网波动、操作过电压、静电放电等造成的损害。
Protection equipment power supply system from lightning over-voltage, power grid fluctuations, operating over voltage, electrostatic discharge, etc.
局部放电模式识别是一种高电压设备绝缘故障诊断的有效方法。
Partial discharge pattern recognition is considered as an effective tool for insulation fault diagnosis on high voltage electric equipment.
局部放电是评定高压电器设备尽缘老化程度的重要参数。
Partial discharge is important parameter for evaluating insulation ageing of high voltage electric appliance and equipment.
局部放电测量是诊断电力设备线圈绝缘状况的一种重要方法。
Measurement for partial discharge current is a important method of diagnosing insulation condition of electric power equipment.
局部放电(PD)是导致高压电工设备绝缘击穿的主要原因。
Partial Discharge (PD) is the main cause of insulation breaking down of HV equipments in power system.
利用日盲型的紫外传感器，可以通过检测特定波长的紫外线来正确检测电力设备的放电。
With"solar-blind"ultraviolet sensors, the power equipment discharge can be correctly detected by detecting the special wavelength of ultraviolet radiation.
局部放电测量技术作为检验电气设备内部绝缘好坏的有效手段得到越来越普遍的应用。
The PD measuring technique is widely used as an effective method of evaluating internal insulation status for electric equipment.
基于这一情况，本文以气体放电噪声源测量“RS12”接收机为例对接收设备噪声特性的测量进行了详细的阐述。
In this paper, the noise performance of receiver "RS12" are measured by means of gas discharged noise as example and explained in detail.
大型电力变压器局部放电信号的特征提取是电气设备绝缘在线监测及故障诊断技术领域的前沿研究课题。
The feature extraction of partial discharge signal of transformer is the front research project in online monitoring and diagnosing high voltage insulation failure.
蓄电池在放电后及时而充分地恢复其容量是实现通信设备直流供电不间断的关键。
Timely and fully recovering the capacity of lead acid battery after discharge is the crux of uninterruptable DC power supply for telecommunications.
蓄电池在放电后及时而充分地恢复其容量是实现通信设备直流供电不间断的关键。
Timely and fully recovering the capacity of lead acid battery after discharge is the crux of uninterruptable DC power supply for telecommunications.
应用推荐