本文提出了一个运算放大器复频域非线性模型的建立方法，并且将该方法所建立的运算放大器模型与实验测量的传递函数特性作了比较。
A nonlinear model of op amp based on Volterra series theory in complex frequency domain is proposed. The comparison of theory and experiment is given.
用该模型还对谐振光放大器的噪声进行了分析。
The noise characteristics of a resonant type amplifier are also analyzed.
基于速率方程建立了线性光放大器(loa)的数值模型，模拟了线性光放大器的增益钳制特性。
The numerical model of the linear optical amplifier (LOA) is built based on the rate equations. The gain clamping characteristics of LOA are simulated.
此外，就放大器输入电路及反馈环节的数学模型进行了误差计算与工作稳定性的分析与评价。
In addition, the mathematical model of the input circuit and the feedback link of the amplifier are analyzed on the error computation and stability evaluation.
提出了一种新的设计微波晶体管放大器的电路模型，给出了通用优化设计程序。
This paper presents a new circuit model for designing a microwave transistor amplifier, and gives a general optimum programing.
设计了一种基于半导体光放大器(SOA)和非线性光学环镜(NOLM)的光脉冲放大与压缩的模型。
A model based on semiconductor optical amplifier (SOA) and nonlinear optical loop mirror (NOLM) is designed for amplification and compression of optical pulse.
从速率方程和多层介质膜理论出发，构建了垂直腔半导体光放大器(VCSOA)的动态传输矩阵模型。
Starting from the rate equations and the theory of multilayer dielectric film, a dynamic transfer matrix model of vertical cavity semiconductor optical amplifiers (VCSOAs) was established.
本文采用分段方法，利用光子数平衡原理建立了半数值双包层掺稀土光纤放大器理论模型。
In this paper a new semi-numeral model for double-clad fiber amplifier according to principle of photons balance was given.
针对线性光放大器(loa)的结构特点，建立了基于速率方程的模型。
According to structural property of linear optical amplifier (LOA), a model was built using rate equations.
建立了基于半导体光放大器交叉增益饱和的波长转换的理论模型。
A theoretical model of wavelength conversion based on cross gain saturation in a semiconductor optical amplifier (SOA) has been established.
由包含弛豫作用的速率方程出发，建立了关于放大器能流密度空间分布最优问题的数学模型。
Based upon the laser rate equations including relaxation between energy levels, the optimum model of a multipass amplifier is constructed.
基于法布里珀罗(F P)腔光束干涉理论，建立垂直腔半导体光放大器(VCSOA)的双稳模型。
Based on the beam interferential theory of Fabry-Perot semiconductor laser, a bistable model of vertical cavity semiconductor optical amplifier (VCSOA) was established.
基于斜率故障模型，提出了一种诊断模拟电路中基于闭环集成运算放大器的模块级软故障的字典法。
Based on the slope fault model, this paper presents a fault dictionary method for soft fault diagnosis of modular analog circuit based on closed-loop operational amplifier (CLOA).
通过合理分析提出了便于计算多波长双向抽运光纤拉曼放大器信号及噪声功率的实用数值模型，给出求解信号和噪声功率的快速算法。
A novel numerical model and an efficient algorithm are developed to calculate the powers of signal and noise light waves in multiple wavelengths bidirectionally pumping fiber Raman amplifiers.
基于该模型，编写了圆柱腔回旋自谐振脉塞放大器单模波束互作用计算程序，并对麻省理工学院的一个实验进行了非线性模拟。
Based on the model, a code of nonlinear beam-wave interaction in the CARM amplifier has been made. We use this code to simulate the experiment achieved in Mashachusetts Institute of Technology (MIT).
论文的第四章给出CARM放大器数值模拟模型，对数值模拟过程中的参量计算，程序流程图做了详细的论述；
The forth chapter introduces the Numerical simulation model of coaxial-waveguide CARM amplifier, gives out parameters computation, and procession flow charts.
通过对大气衰减系数、放大器放大能力、光电二极管接收灵敏度等一些主要参数进行分析，建立了激光模拟系统的数学模型。
Secondly, the mathematical model of the laser simulation system is built upon the atmosphere attenuation, the amplifier extent, receiving-sensibility of photoelectric diode and other preferences.
论文首先从理论的方面对放大器的设计进行分析，对放大器的电路模型、偏置点、线性、热稳定性、输入输出匹配进行理论上的分析。
First, we analyse the power amplifier in theory in the circuit mode, biasing point linearity, thermal stability, input and output matching circuit.
根据理想模型分析，表明负反馈放大器的4种负反馈对放大嚣的4种源增益的影响是不同的。
The analysis of ideal model indicates that 4 negative feedbacks of the negative feedback amplifiers have different effects on 4 gains of the amplifiers.
运算放大器扩展功能，在电子电路设计中其数学模型为放大电路，含移相电容、反馈电阻及输入阻抗。
In circuit design, the mathematical model of operational amplifier expanded function is expanded circuit. The circuit includes phase electric capacity, the feedback resistance and the input impedance.
阐述了流量放大器的工作原理，建立了流量放大器的静动态数学模型，并利用计算机进行数字仿真。
The principle behind the flow amplifier is described and the static and dynamic mathematical models is established. On this basis, digital simulation is implemented on a computer.
同时针对主要来自模拟电路的诸如实际电容的不精确匹配、放大器的有限增益等因素，通过MATLAB模型来详细分析这些模拟电路误差会对于电路性能产生的影响。
The difference between the real circuit and the design model due to the capacity mismatching, finite gain of amplifier and other analog mismatch can be simulated by MATLAB.
文中通过对各类型集成运算放大器的特性的研究，建立了一种适合于各类型集成运放的时域特性分析的非线性宏模型。
In this paper, a nonlinear macromodel for all types of Integrated Circuit Operational Amplifiers (IC OP-Amps) is developed through studying the characteristics of all types of IC OP-Amps.
而采用多项式结构描述放大器的特性是行为模型研究中最主要的方法。
For behavioral model approaches, polynomial, or Volterra series for memory, is the most common function which is used to fit nonlinearity of power amplifiers.
给出了半导体激光(LD)放大器的电路模型，使得对半导体激光放大器的特性可以用通用电路分析软件进行分析。
A circuit model of a semiconductor laser (LD) amplifier is presented. The model enables the analysis of the characteristics of a LD amplifier using general circuit analysis software.
概述了拉曼光纤放大器(FRA)和掺铒光纤放大器(EDFA)的理论模型，据此计算它们的增益谱。
The theoretical models of Fiber Raman Amplifier (FRA) and Erbium Doped Fiber Amplifier (EDFA) are presented, and their gain spectra are accordingly calculated.
提出了具有可变光衰减的串联量子阱半导体光放大器的数字模型并与实验数据相匹配。
A model for the number of QW SOAs in series with variable optical attenuation is developed and matched to the experimental data.
该模型405是一款高性能2声道唱机前置放大器为专业应用而设计的。
The model 405 is a high performance two-channel phono pre-amplifier designed for use in professional applications.
结合现代移动通信对功率放大器的要求对前馈法做出了具体的分析：包括工作原理、数学模型、软件仿真等。
The feedforward method has been discussed in detail combined with the modern communication system application including principle, mathematic model and software simulation.
结合现代移动通信对功率放大器的要求对前馈法做出了具体的分析：包括工作原理、数学模型、软件仿真等。
The feedforward method has been discussed in detail combined with the modern communication system application including principle, mathematic model and software simulation.
应用推荐