两段传动轴之间有一个中间支承轴承，并由万向节连接。
The two-section propeller is supported by a center bearing and coupled together by universal joints.
该离合器由离合器本体、本体支承轴承、钢珠座、钢珠、导柱、弹簧和调整螺钉组成。
The clutch is composed of a clutch body, a support bearing of the body, a steel ball seat, a steel ball, a guide column, a spring and an adjusting screw.
卧式铣床支架的支承轴承的精度会影响刀杆的回转精度，从而影响孔的尺寸精度和圆柱度。
The precision of the support bearing of the horizontal milling machine bracket affects the rotation precision of the cutter rod, thus affecting the dimension precision and cylindricity of the hole.
提出用剖分结构的静压轴承作为氧气压缩机曲轴支承轴承，取代轴瓦剖分形式的滑动轴承。
The idea of using split hydrostatic bearing as the support bearing of crankshaft in oxygen compressor to replace the split sliding bearing was proposed.
回转支承轴承是一种能够承受综合负荷的大型支承轴承，可同时承受较大的轴向负荷、径向负荷和倾翻力矩。
Slewing ring bearings to withstand a large-scale integrated load bearing support, which can bear a greater axial load, radial load and tipping moment.
转子位移激励的幅值受到支承轴承游隙的约束，当转子达到“特定”转速以后受到轴承游隙的限制而等于游隙。
This is mainly due to the fact that the rotor displacement excitation amplitude is constrained by the windage of the rotor backup bearing.
3减速机为垂直轴形式，第一级输入轴为伞齿轮轴，在伞齿轮支承轴承处过渡轴肩处出现较严重的应力集中而发生疲劳破坏。
3 the reducer is in the form of vertical shaft, the first input shaft is the bevel gear shaft, and the more serious stress concentration occurs at the transition shaft of the bevel gear bearing.
本文提出用永磁材料制作的永磁悬浮轴承作高速旋转轴的主要支承，轴流式超音涡转作回转轴的驱动动力源。
The paper proposes a new method of using the ultrasonic-speed turbine as a power sourse and using the magnetic suspension bearing as the main back-up bearing for the rotation axis.
大多数轴承都支承径向或轴向负荷的转轴。
Most bearings support rotating shafts against either transverse (radial) or thrust (axial) loads.
若用带轮、链轮等驱动时应设托架支承，以防主动齿轮轴承受径向力。
If the pulley, sprocket-driven, such as supporting brackets should be established to prevent the initiative gear bearing the radial force.
转子轴支承为双列调心滚子轴承。
Rotor shafts are supported on double-row radial spherical roller bearing.
将磁力轴承应用于硬盘的支承，完全消除了轴承与硬盘转子的机械接触，使硬盘具有其它轴承支承的硬盘无法企及的优点。
Applying AMB to the support of HDD (hard disk drive), which can avoid the contact of bearing and HDD rotor, it has a lot of advantages in comparison with other bearing types.
本文还讨论了通过选择不同的支承参数和轴承参数来扩大上稳定区的方法。
The paper discussed how to enlarge the upper stable region by selecting support parameters and bearing parameters.
研究了非线性径向轴承支承的转子系统的动力行为。
Dynamic behaviors of a rotor system with nonlinear journal bearing supports were analyzed.
研究了具有滑动轴承支承的平衡转子系统的非线性动力行为。
Nonlinear behaviors of balanced rotor dynamical system with sliding bearing supports were analyzed.
研究了弹性支承滑动轴承系统的油膜稳定性理论。
This paper studies the film stability theory of the sliding bearing system with elastic support.
设计参数合理的外弹性阻尼支承可以明显改善轴承-转子系统的固有特性及强迫振动响应。
External elastic damping support, if designed reasonably, may obviously improve the natural or forced vibration response characteristics of bearing rotor systems.
提出了动静压混合滑动轴承支承-转子运动轨迹的控制技术和方法，以期用于转子振动控制和非圆截面零件加工。
Based on active hybrid sliding bearing-rotor system, the control technique of the motion of the rotor was researched, which could be used for vibration control or non-circular machining.
提出了动静压混合滑动轴承支承-转子运动轨迹控制技术和方法，以期用于转子振动控制和非圆截面零件加工。
Based on active hybrid sliding bearing-rotor system, the control technique of the motion of the rotor was studied, which then was used for vibration control and non-circular machining.
本文详细考察了滑动轴承支承的转子不平衡质量的大小及分布对系统稳定性的影响。
This paper studies in detail the effect of magnitude and distribution of rotor unbalance on the stability of rotor-journal bearing system.
进而阐述了解决这些关键问题的原理和方法，即两个三滚珠轴承支承和差动气流循环密封相结合的方法。
Further, the principles and ways which solve the crucial question are given, that is, two supports consisted of three-ball bearing are combined with the sealing by differential gas flow cycle.
这种测试技术已成功地用于不同类型轴承支承下的转子轴承系统的稳定性研究。
This testing technique has been applied to stability study on a rotor bearing system supported by various kinds of bearing.
设计了一种磁悬浮风力发电机的转子系统，径向方向采用磁力轴承支承，轴向方向靠机械力约束。
A rotor system of the magnetic suspending wind power generator is designed, which is supported with magnetic bearings in radial direction and constrained with mechanical force in axial direction.
研究径向主动电磁轴承支承的不对称转子系统的动力行为及稳定性。
Stability and coupling dynamic behaviors of a journal active electromagnetic bearing rotor system are analyzed.
本文采用非线性分析方法研究了同时考虑支承阻尼和转子外阻尼的弹性支承滑动轴承系统的油膜失稳振动问题。
This paper studies the film unstable vibration of bearing system supported by flexible support considering both support damp and rotor extemal damp by use of nonlinear analysis.
变速传动轴承是既有减速箱的变速功能，又具有滚动轴承支承功能的特殊轴承。
The shifting drive bearing is a special bearing which poss-esses both the shifting and the supporting function.
本文建立了同时考虑支承阻尼和转子外阻尼在内的弹性支承滑动轴承系统模型。
The paper established a modal of bearing system supported by flexible support considering both support damp and rotor external damp.
螺旋由局部端板支承，轴承安装在端部的法兰上。
The screw is supported by a local end plate and the bearing is mounted on the flange of the end.
螺旋由局部端板支承，轴承安装在端部的法兰上。
The screw is supported by a local end plate and the bearing is mounted on the flange of the end.
应用推荐