镜片的焦强范围介于+6至—6屈光度之间，一旦确定了焦强，就可以将硅油瓶从眼镜摇臂上卸下，并将它们存放在安全的地方。
The power range of the lenses is + 6 to -6 Diopters, and once the lenses are set, you take the vials off the arms of the glasses and store them for safe keeping.
用摇臂式的落地灯，或在床头板上安装一个摇臂式壁灯。
Use a swing-arm floor lamp instead, or mount a swing-arm wall lamp above the headboard.
转向系统包括转向盘、转向轴、蜗杆、扇形齿轮、转向摇臂、直拉杆、转向节臂、主销、转向臂、转向直拉杆、前轴和转向节。
It consists of steering wheel steering shaft worm gear sector pitman arm drag link steering knuckle arm king pin steering arms tie rod front axle and steering knuckle.
转向系统包括转向盘，转向轴，蜗杆，扇形齿轮，转向摇臂，直拉杆，转向节臂，主销，转向臂，转向直拉杆，前轴和转向节。
It consists of steering wheel steering shaft worm gear sector pitman arm drag link steering knuckle arm king pin steering arms tie rod front axle and steering knuckle.
齿条一端连着拉杆，拉杆与车轮轴上的转向摇臂相连接。
The tie rod at each end of the rack connects to the steering arm on the spindle.
其中一名负责人与摇臂括号和火花塞安装。
One of the heads with rocker arm brackets and spark plugs installed.
因而具有较强的发动机气门摇臂机构总成及其它金属制品的开发、生产能力。
Therefore, we are comparatively strong in development and production of motor valve rocker framework assembly and other metal products.
拉杆，或称为转向拉杆，与摇臂的另一端连接。
油泵中可变形膜片的泵膜通过膜片回位弹簧和膜片拉杆与摇臂相连。
Inside the pump, a flexible diaphragm connects to the rocker arm though a diaphragm spring, pull rod and link.
钻床也许被分为三种一般类型：立式钻床、多轴钻床和摇臂式钻床。
The drilling machines may be classified into three general type:Vertical spindle, Multiple Spindle, and Radial Spindle machines.
缸盖上装有气门、气门弹簧和摇臂轴上的摇臂，推杆推动这部分气门传动机构工作。
The cylinder head carries the valves, valve springs and the rockers on the rocker shaft, this part of the valve gear being worked by push-rods.
图片1显示了摇杆武器与摇臂引脚和球轴承安装。
Photo 1 shows the rocker arms with the rocker arm pins and ball bearings installed.
整个齿轮齿条式转向器装载金属壳内，其齿条从转向器伸出来与转向摇臂连接。
A rack-and-pinion gear set is enclosed in a metal tube, with each end of the rack protruding from the tube.
副翼三角摇臂的安装位置。
在“电子节目指南”（两个下巴）和“ETG的”（三下巴）爪平行线利用了双动活塞和摇臂的设计。
The "EPG" (two jaw) and "ETG" (three jaw) parallel gripper lines utilize a double acting piston and rocker arm design.
安装液压挺杆和摇臂。
摇臂向下移动的那一边推动气门杆以打开气门。
The downward-moving side of the rocker arm pushes on the valve stem to open the valve.
按照拆卸顺序安装推杆、摇臂、枢轴和桥臂。
Install the push rods, rocker arms, pivots and Bridges in the order they were remove.
本文向读者推荐港口鹤式起莺机摇臂尾端平衡重设计方法。
The paper presents a designing method for the tail—end balance weight of the swing—arm of the "Crane" type portal cranes.
这表明，半径设置的结束摇臂括号被削减使用转盘。
This setup shows the radius on the end of the rocker arm brackets being cut using the rotary table.
成品摇臂括号。
没有摇臂钻床加工痕迹。
凸轮挺杆推动控制摇臂的推杆。
The CAM follower rides against a push rod, which pushes against a rocker arm.
由于神东矿区煤层的特殊性，在使用艾柯夫公司SL500型采煤机时，摇臂座出现了裂缝。
Due to the coal seam particularity in Shendong Coal Mine, cracks appear at the radial seat of Eickoff SL500 shearer.
如果气门间隙需要调节，松开摇臂调节螺丝上的防松螺母，转动调节螺丝直到测隙规滑动时稍带阻力为止。
If valve clearance needs to be adjusted, loosen the locknut on rocker arm adjusting screw. Turn adjusting screw until feeler gauge slips with a slight drag.
我厂具有五十年摇臂钻床开发制造的丰富经验，具备世界上规模最大、工艺独到的制造流程与装备。
I plant with the development and fabrication of radial drilling machine years experience with the world's largest and unique manufacturing process technology and equipment.
介绍了利用摇臂钻床对汽车门窗框样件进行实际测量，并运用计算机将测量结果绘制成曲线的方法。
Measurement for automobile door and window sample parts are made on a radial drill and curves are drawn by means of computer with the data measured.
介绍了利用摇臂钻床对汽车门窗框样件进行实际测量，并运用计算机将测量结果绘制成曲线的方法。
Measurement for automobile door and window sample parts are made on a radial drill and curves are drawn by means of computer with the data measured.
应用推荐