第一种样式linespoints通常在对数据绘图时非常有用，它在涉及的每个示例或数据点处标记一个点，并使用线性插值法连接连续的点。
The first style, linespoints, is generally useful when plotting data. It marks a point at each sample or data point considered, and connects consecutive points using linear interpolation.
同经典的非线性有限元相比，插值系数有限元法是一种高效而经济的算法。
It has the same superconvergence as that classical finite element method, but more economic and efficient.
将基于法向的曲线细分技术应用到图像插值中，提出一种基于细分的图像插值算法。
By extending the normal based subdivision scheme for curve and surface design, a new algorithm for image interpolation is proposed in this paper.
研究了PV插值法导致错误配准的原因，提出了通过调整灰度级数来避免。
Researched the reason why PV interpolation may lead to wrong registration, and suggested to reduce gray levels to avoid the problem.
在对采用合成推理规则进行模糊推理的机制进行分析的基础上，给出了利用插值法也可以得到相同结果的原理。
Based on the analysis of the mechanism of fuzzy reasoning by compositional rule of inference, the principle of how to achieve the same results with interpolation method is presented.
采用传统插值法放大的图像存在边缘锯齿化和边缘模糊化缺点。
The images magnified by traditional interpolation method have shortages such as blurred edges and jagged edges.
本文提出了一种改进的分段二次插值法描写光学系统的光瞳形状，得到了满意的效果，其坐标误差小于1%，面积误差约0.25%。
A modified segmental quadratic interpolation method which describes the shape of optical system pupil with relative coordinate error less than 1% and area error about 0.25%, is presented.
在距离标定中，本文提出的二维插值法减小了全景反射镜面因加工精度不高而带来的距离标定误差。
Two-dimensional interpolation method is discussed to reduce the error of distance calibration which is caused by the omni-directional machining accuracy.
采用分段线性插值法，给出了由形状观测离散值反求密度分布的计算方法，并给出了算例。
A calculation strategy for the recovery of density distribution by the shape observations is presented and proved by piecewise linear interpolation method.
用迭代法对数字图像经过插值放大后产生的模糊问题进行了研究。
We study the problem of blurring of digital images after interpolation and enlargement by using the iteration method.
在应用裂纹柔度法计算残余应力时，插值函数及其阶数的选择对计算结果的精确性有着较大的影响。
In the evaluation of the residual stress by the crack compliance method, different interpolation functions and their fit order had great effect on the calculation results.
指出用三次样条插值函数法只能解决由一组曲线族组成的图表处理问题。
The use of cubic spline interpolation function method can only solve the processing problem of nomographs consisting of one family curves.
在控制器的设计中利用插值法导出了一个超越方程解函数的具有较高精度的近似计算公式。
An approximate formulation with sufficient high precision is obtained from an implicit function in designing the feedback linearization control law.
这一方法不仅能够算出所用插值算法的实际径向偏移距离，还能比较不同算法关于径向精度的建模质量。
This method can not only describe deviation of features after modeling but also compare the modeling quality of different modeling methods according to radial accuracy.
在微机地理制图中，张力样条插值法是一种有效实现光滑曲线的方法。
In the computer geographic mapping, the tension spline interpolation is an effective method to realize the smoothing curve.
根据凸轮机构的检测数据利用三次周期样条函数插值法对凸轮实际廓线进行曲线拟合。
Curve fitting of the actual CAM profile with the Cubic-periodic spline function according to the measured data of the CAM.
利用距离幂反比法加分形插值算法建立了地形模型。
Established the landform model by distance power inverse ratio method and fractal interpolation algorithm.
结果表明，抛物面插值法计算速度较快，精度较高，并且误差波动较小。
The results show that parabolic interpolation is much better than others concerning calculation speed, calculation accuracy and error fluctuation.
顶点位置和法向插值是参数曲面造型的重要内容。
Interpolation to vertex positions and normals is one of important contents in parametric surface modeling.
介绍了一些在地质统计学上常用的算乱数据插值方法，包括移动平均法、克里格法等。
Introducing some interpolation algorithms in the geology statistics that are usually used including of Moving Average Method, Krige etc.
提出了利用三次样条插值法，处理BOC调制信号相关谱主峰及副峰的数据，以提高相位测量精度的算法。
A method using cubic-spline interpolation to process correlation peaks was proposed to improve the precision of BOC-modulated signal PN code phase measurement.
油气井测试过程中，处理地面数据的常用方法是估计估算、查表插值的手工法，这种方法既繁琐且误差大。
In the process of well test, the manual methods, estimating method and interpolation by chart, are usually used to deal with surface data, which are tedious and have great errors.
提出了线性插值法代替惯用的泽尼克多项式拟合用于表面的精磨。
Local interpolation model is used to replace Zernick polynomials for surface contour error fitting at the grinding stage.
克立格法是三维空间插值的主要方法之一，目前已广泛应用于矿体储量计算过程中。
Kriging is one of the three dimensional interpolation methods and is now widely used in orebody reserve calculation.
基于局部作用原理，借用有限元离散和插值技术，引入元胞自动机的演化思路，得到一种新的力学计算方法——元胞单元法。
Based on principle of local action and the idea of cellular automata, a new mechanical method cellular element method is presented through inducting the discrete techniques of finite element method.
将随机图形与自由曲面的变形相结合，提出了随机曲面生成的均匀插值移位法。
By combining random graphics and deformation of free-formed surface, a uniform interpolation displacement method for free-formed surface generation is proposed.
当前实用性较强的射线追踪方法，包括波前法，最短路径法，走时插值法，程函方程有限差分法等。
More practical ray tracing methods currently include the wavefront method, the shortest path method, the travel time epenthesis method, the eikonal equation finite difference method, etc.
当前实用性较强的射线追踪方法，包括波前法，最短路径法，走时插值法，程函方程有限差分法等。
More practical ray tracing methods currently include the wavefront method, the shortest path method, the travel time epenthesis method, the eikonal equation finite difference method, etc.
应用推荐