本文以雷达为例给出一种测向定位方法，并以数学方法滤去误差，提高测量结果的精度。
This article give a kind of location method, which determines direction by radar, then filters error by mathematical method in order to raise the precision of survey result.
介绍一种采用数据融合技术对分布式检测参数进行数据处理的方法，可以有效地提高测量结果的精度。
Based on the technology of data fusion, a method is presented to process distributed detection parameters. This method can efficiently improve the precision of measuring result.
经实际应用表明，本方案不但可以实现实时的显示和打印测量结果，而且也提高了检测效率和精度。
The practice indicates that the project can not only complete the timely display and the printing measurement effect, but also improve the detecting efficiency and accuracy.
结果表明该方法能有效抑制测量误差的影响，提高识别与平衡精度。
The experiment results show that this method can decrease the influence of measurement error on identifying precision and improve balance precision.
误差实验结果表明，该补偿方法可以提高姿态测量的精度。
Test results show that these methods significantly improve the attitude measurement precision.
由于减少了中间环节，测量结果的精度也得到了提高。
The accuracy of the measuring results is also raised due to the reduction of intermediate links.
并在实验基础上提出了采用分段标定及对环境温度补偿结果进行修正的方法，提高了测量精度。
To improve the measurement accuracy of the thermometer, the calibration for different ambient temperature and the correction of ambient temperature compensation are presented.
将频谱重心校正方法应用于涡街流量计数字信号处理系统，实验结果表明该方法提高了流量计的测量精度。
The spectrum center correcting is applied to the digital signal processing system for vortex flowmeter, and the results show the measuring precision of flowmeter is improved by this method.
分析结果表明，利用三天线构成的双基线机载干涉SAR是改进相位展开过程、提高高程测量精度的有效方法。
The results show that dual-baseline airborne interferometric SAR using three antennas is an efficient scheme to improve phase unwrapping processing and improve height measurement accuracy.
试验结果表明：采用该方法进行温度补偿后，可以基本消除流体温度变化引起的测量误差，提高系统的测量精度。
The result of experiment shows that the measurement error from fluid temperature changes can be almost removed, and the accuracy for this system can be improved.
综合实验结果表明，这些电路设计对于提高相位式激光测距仪的测量精度是有效的。
The results of the experiment indicate that these circuit designs raise the measuring accuracy of the phase laser distance measuring system effectively.
并报告了改进仪器质量和提高仪器测量精度的一些实验结果。
These results are from improving instrument quality and increasing instrument measuring accuracy.
其次，简要介绍了所用的实验装置、实测结果以及进一步提高测量精度的途径。
Then, the experimental equipment, measurement results, and the way of further improving measurement accuracy are introduced briefly.
最后，对于非整数次谐波的测量用改进算法来减少频谱泄漏，仿真结果表明，改进算法能较大的提高参数测量的精度。
Finally, an improved algorithm for fractional harmonic analysis is used to reduce the leakage, the result of the simulation shows it can heighten the precision of the measure of the parameter.
通过空气折射率测量及补偿实验，证实了该方法的可行性，测量结果经补偿后可使精度提高一个数量级。
It is testified that the method is effective and the measuring accuracy is improved by the experiments of measuring and compensating for refractive index of air.
仿真和试验结果表明该算法在增加较少运算量的同时提高了介质损耗角的测量精度。
The results of simulation and tests indicate that using the proposed algorithm the dielectric loss Angle can be measured more accurately while less calculation amount is increased.
本文将新的赋初值方法与旧的赋初值方法作了详细的比较，仿真实验结果表明，利用反算得到的仿射变换系数进行赋初值，可以提高效率和测量精度。
Comparison of the new methods with the old ones by simulated images revealed that higher efficient and accuracy could be achieved by introducing affine transform into initial parameter vector.
实验结果表明：采用插值细分的方法能够提高图像传感器的分辨力和细丝直径的测量精度。
This test results show that the method of equidistance subdivision can highly improve the resolution of the image sensor and the measurement accuracy of the wire tiny diameter.
采用了一种局部滤波的方法，通过滤波修正测量结果，使得测量精度明显提高。
A kind of part filtering algorithm is used for modifying the metrical result and make the metrical precision improved clearly.
结果表明，本方法是提高塑性变形测量精度的有效手段。
It is shown that this means is effective to improve the precision in the measurement of plastic deformation.
经现场应用结果表明：采用误差校正模型的方法，明显提高了测量精度，具有较好的实用价值。
The results by way of locate application show that the method of adopting emendable error model can improve the measuring precision evidently and be possessed preferable and practical value.
阐述了不平衡电桥法测量电池内阻的原理，给出实验设计，测量结果与电位差计法相比可提高测量精度。
This paper described a principle of determining internal resistance of the battery by imbalance electric bridge, and presented its experiment design.
为了提高CARS测量温度的精度，测量和分析了检测系统中狭缝函数对测量结果的影响，确定了狭缝函数的具体形式。
In order to increase the precision of CARS temperature measurement, the slit function of the detection system is studied and determined.
利用测量得到的栅电阻，计算结果的精度可以进一步提高。
Provided that the value of gate resistance is acquired from measurement, the precision of the solution can be improved further.
本文还对实验结果进行了分析，对可能产生误差的原因进行了介绍，以此为基础，为提高系统的测量精度采取了相应措施。
This article also analyzed the experimental results, introduce that to may produce the error cause having been in progress, as a basis for improving the system accuracy has taken appropriate measures.
并根据实测结果，对该方法进行了误差分析，指出了提高测量精度的途径。
Based on the measured results, it analyzes the error of the method and proposes the approaches to improving the measuring accuracy.
理论分析和数值结果均表明：在电力系统的频偏条件下，使用四阶卷积窗可显著提高谐波参量测量精度。
The results show that the precision of harmonic parameters estimation can be greatly improved by 4-order convolution window under the condition of less sampling synchronous deviation.
初步结果显示，使用内部参考组织与直方图技术，可提高重复性的扫描，以扫描测量以及跨扫描仪的精度。
Preliminary results indicate that the use of internal reference tissues with the histogram technique may improve reproducibility of scan-to-scan measurements as well as inter-scanner precision.
初步结果显示，使用内部参考组织与直方图技术，可提高重复性的扫描，以扫描测量以及跨扫描仪的精度。
Preliminary results indicate that the use of internal reference tissues with the histogram technique may improve reproducibility of scan-to-scan measurements as well as inter-scanner precision.
应用推荐