主要分析影响支承性能变化的因素及提出相应的解决方法。
And the article mainly makes analysis about factors for affecting supporting or and suggesting the solution.
本文介绍了一次烧水晶釉墙地砖的一些常见缺陷，并提出相应的解决方法。
This paper introduces one-firing crystalline glaze wall or floor tile some common defects, and proposes solving methods accordingly.
本文论述了直剪试验的方法及在直剪试验中常见问题，并提出相应的解决方法。
This paper states straight shear test and common problems in test. It also puts forward relevant solving method.
着重分析了印铁拉长的产生原因，阐述了印铁拉长的影响因素并提出相应的解决方法。
The causes and the influencing factors were analyzed and the relevant solutions were put forward.
对烧结机机尾电除尘器在使用过程中经常出现的几种故障进行分析，并提出相应的解决方法。
Several failures using ESP at the sintering machine tail are analysed, and the corresponding ways are put forward.
应用具体实例，研究了加工误差对少齿差内啮合齿廓重迭干涉的影响，并提出相应的解决方法。
The way to solve the problem of the tooth outline overlap interference caused by the processing errors in the practical use is put forward.
以广西移动通讯网络为例，分析掉话的原因并提出相应的解决方法，丰富通讯网络处理掉话的经验。
Taking Guangxi mobile network as an example, the reasons of drop call are analyzed and corresponding solutions are proposed to enrich, the experience of processing off-line.
本文从合金本身的性能出发，对生产中切削锌基合金常遇见的问题进行分析，并提出相应的解决方法。
In this paper, from the characteristic of alloy, some issues in cutting Zinc Matrix alloy analyzed, at the same time the corresponding resolvents also given.
通过分析计算机应用基础实验教学中存在的问题，然后提出相应的解决方法，从而提高计算机应用基础实验教学质量。
Based on the analysis of problems in basic computer applications experiment teaching, some corresponding solutions are proposed to improve experiment teaching quality of basic application of computer.
介绍了多道电生理记录分析系统的原理及用途。并对系统设计时所遇到的几个关键问题进行讨论并提出相应的解决方法。
This article introduces briefly the principle of the multi-channel physiology recorder and its applications. We here also discuss several key problems met in designing, and their related solutions.
针对该复杂系统可靠度的测算与决策，提出相应的解决方法，即从任何一棵初始生成树开始就可得到对应系统可靠度的方法。
Beginning at an initial spanning tree, the calculating of the corresponding complex systems can be obtained. A simulation example shows the usefulness of the proposed method.
最后以EMTDC仿真为手段对深圳电网典型线路的不平衡电流进行再现，并根据前文的研究结论提出相应的解决方法并仿真验证。
Finally, the unbalanced current in Shenzhen power grid is reproduced by simulation with EMTDC. Based on conclusions of earlier studies, a solution is proposed and it is proved by simulation.
本文分析、比较了当前我们在住宅建设的前期造价控制阶段存在的问题，针对这些问题提出了相应的解决方法，为更好、有效地控制工程造价提出了意见和建议。
This article analyses and compares the problems existing in the cost control of the early stage, and it discusses a solution to control the project cost effectively.
文章分析了造成部分用户供暖系统不热的原因，并提出了相应的解决方法。
This paper analyzes the reasons of the athermal phenomenon in some users' heating system, and puts forward some corresponding solving methods.
从注射成型的工艺过程入手，讨论了注塑制件气泡形成的原因，提出了相应的解决方法。
The reasons of air bubble appearing in injection product were discussed from produce technology and the corresponding solutions were presented.
根据故障现象，用观察、测量等手段确定故障的类型和发生的处所，并针对这些故障提出了相应的解决方法。
According to the phenomenon of malfunction, using the means of observation and measure to certain the type and place, and aiming these faults, put forward homologous solution method.
基于工程实践和理论分析，研究了这些问题产生的原因并提出了相应的解决方法。
Based on engineering practice and theoretical analysis, the causes of these problems have been studied and the corresponding solutions have been introduced.
本文不仅分析了问题产生的原因，也提出了相应的解决方法。
Besides the analyzing the reasons of the concerning problems, the paper also provides some possible solutions.
对当前科技查新工作中存在的一些问题进行了深入探讨，并根据实际情况提出了相应的解决方法。
This paper makes deep probe into some problems existing in sci-tech novelty searching work, and puts forward corresponding solving methods according to real situation.
介绍了用手工及半浸机组生产镀锌管经常出现的质量问题及产生这些问题的原因，并提出了相应的解决方法。
The common quality problems of galvanized tube produced by hand and half-submersion sets and the cause concerned are introduced, and the related resolution method is put forward.
也对上述诸问题提出了相应的解决方法。
随后分析了水系统流量过大带来的问题，并提出了相应的建议与解决方法。
Then, this paper discusses the problems result from oversize water flow, and some related suggestions and solutions are proposed.
本文针对目前校园英语电台普遍存在的问题进行了分析，提出了相应的解决方法。
This article has analyzed some problems in the campus English radio station and has put forward the solutions.
本文简述了锡膏印刷的工艺流程，分析印刷过程中造成的相关缺陷及其产生的原因，并提出了相应的解决方法。
This article introduces the process of solder paste technical printing, analyses the interrelated disfigurement in printing and cause, and puts forward the relevant solvent.
介绍了钢管衬塑的设备性能、工艺参数、质量标准，以及生产过程中常见的质量问题，并提出了相应的解决方法。
It introduce equipment properties, procedure parameters and quality standards, as well as familiar quality problems during production. It all gives solving methods for these problems.
总结了稀油密封干式储气罐的常见故障，分析了密封机构故障的形成原因，提出了相应的解决方法。
The common failures of dry gasholder with oil sealing are summed up, the reasons for sealing mechanism failures are analyzed, and some appropriate solutions are put forward.
分析了膜式燃气表运行过程中有异常噪声的原因，提出了相应的解决方法。
The reason why the abnormal noise occurs during operation of diaphragm gas meter is analyzed, and the corresponding solution is put forward.
通过对纳米压印过程中影响图形精度的一些因素进行分析，提出了相应的解决方法。
By analyzing some factors influencing the pattern precision in nano-imprinting, corresponding measures have been proposed.
通过对纳米压印过程中影响图形精度的一些因素进行分析，提出了相应的解决方法。
By analyzing some factors influencing the pattern precision in nano-imprinting, corresponding measures have been proposed.
应用推荐