分析了推板式垂直分切机的工作原理。
The working principle of vertical slicer with pusher was analyzed.
采用不锈钢推板,同步直线钢丝切泥坯器。
By using stainless steel push board, linear synchronous reel cutter.
辅助杆位于推板的两侧确保管材的前进方向。
Auxiliary Pole: work with direction wheel at bottom of push board, ensure pipe moving direction.
作用;往复推板式机构,理饼机率高于95%。
Function, Reciprocating push board, Richard bread than 95% probability.
真空吸附,推板自动送纸,弯曲纸板也可顺利送入。
Vacuum assisted kicker feeder, even bending paperboard can be fed smoothly.
推板窑作为热工烧结设备,广泛应用于电子材料高温处理。
The pusher kiln is widely used to heat the electronic material with high temperature as a sintering device.
可使用普通推板窑密堆积烧结,具有低成本、高品质优势。
The FPT ferrite material can be sintered with dense accumulation high quality in common roller-kiln, which features low cost and high quality.
本文从推板窑的压强分布特点入手,介绍了升降温段的结构特点。
On the basis of the pressure distribution in the pusher kiln, the structural characteristics of the temperature-rising zone and the temperature-falling zone are introduced.
保证推板有足够的避空位置,产品推出来以后,推板不会碰到流道。
Make sure the stripper is clearance enough so it will not hit the runner when parts get stripped.
报告了Z4型推板式左心辅助血泵的结构以及进行流场试验的方法。
This article reports the design of Z 4 Push Plate Ventricular Assist Device and the test of its mean flow velocity patterns.
用途:工业窑炉用棚板、立柱、槽板、推板、匣钵、卡具、风口组合砖等。
Application: Used as Kiln shed board, slide push board, sagger, Tuyere combined bricks.
在服装推板的教学和应用过程中,某些结论或较复杂部位的档差往往令人费解。
In the process of teaching and practicing in the garment grading, some conclusions either variations of more complex position often make us obscure.
本发明是一种谷耙,包含有耙柄(1)、扭簧(5)、推板(6)和耙钉(7);
The invention relates to a grain harrow, comprising a harrow handle (1), a torsion spring (5), a push plate (6) and a harrow pin (7);
目前海岸工程实验室中几乎都采用推板或摇板式生波机产生实验研究所需要的波浪。
The wave is almost generated by rolling or blade wave makers in most coastal engineering LABS at the moment.
介绍了一种型芯与推板双锥面配合脱模机构设计,分析了结构特点及制造加工工艺性。
A demoulding structural design by the cooperation of core and dual-cone is introduced, and the structural character and manufacture process are analyzed as well.
探讨了汽车分电器推板式离心提前机构的结构和工作过程,给出了它的设计计算方法。
This paper probes the structure and working process of auto distributor push off centred advance machine and its design calculation methods are given.
内螺纹组件能够采用推板设计被从型芯上推出,假如塑性材料在推出阶段有足够的弹性。
The internally thread component may be stripped from the core using the basic stripper plate design providing the plastic material has sufficient elasticity during the ejection phase.
内螺纹组件可能采用推板设计被从型芯上推出,如果塑性材料在推出阶段有足够的弹性。
The internally thread component may be stripped from the core using the basic stripper plate design providing the plastic material has sufficient elasticity during the ejection phase.
文章还提出在水坡推板机上利用“定子绕组和转子绕组并联的感应发电机”回收能量的展望。
Finally, an idea of energy recovering with "an induction generator with both stator and rotor windings connected in parallel" is presented.
目的:这项研究旨在比较局部应用丝裂霉素C和5-氟尿嘧啶预防推板切除术后硬膜外粘连的效果。
The effectiveness of the topical application of mitomycin C (MMC) or 5-fluorouracil (5FU) in preventing peridural adhesion after laminectomy was compared in this study.
这次设计的课题是推板多工位级进模设计,多工位进模设计是一种高效率,长寿命,高精度的模具。
The design of the topic is on board design of Multi-position into the mold. Design of Multi-position into the mold is an efficient longevity and high precision tool.
模具的特点在于利用注塑机顶出动作,由推板驱动螺杆,经齿轮传动使螺纹型芯旋转,塑件自动脱出。
The injection machine pushed the knockout plate, and then the knockout plate drove the threaded rod, resulting in the rotation of the threaded core and the auto_demoulding of the plastic part.
本文介绍了电子部第48研究所研制的新型全自动氮气氛保护推板窑电气控制的主要特点和基本原理。
The basic principle and features of electric control in the new N_2-protectedautomatic pusher kiln developed by 48th Research Institute of MEI are intro-duced.
应用结果表明,这种多层推板电窑具有烧结后产品尺寸和性能一致性好、成品率高、运行成本低等特点。
The practical use of the kiln shows that the new kind of kiln features good uniformity of size and performance, high rate of qualified products and low operational cost, etc.
应用结果表明,这种多层推板电窑具有烧结后产品尺寸和性能一致性好、成品率高、运行成本低等特点。
The practical use of the kiln shows that the new kind of kiln features good uniformity of size and performance, high rate of qualified products an...
布置成低于所述轴的止推板,该止推板具有形成有凹曲面的凹部,所述凹曲面与所述轴的所述端部接触;
Accordingly, the thrust plate radially moves in accordance with the position in which the lower end portion of the shaft is in contact with the concave portion of the thrust plate.
透明塑料盒盖注射模采用点浇口进料,脱模机构采用推板推出时,增设引气辅助推出机构,可确保制件顺利脱模。
A point gate was used for feeding in the injection mould for the transparent plastic box lid.
透明塑料盒盖注射模采用点浇口进料,脱模机构采用推板推出时,增设引气辅助推出机构,可确保制件顺利脱模。
A point gate was used for feeding in the injection mould for the transparent plastic box lid.
应用推荐