说明卡片上说，首先要打开苹果电脑或PC机上的控制软件，然后，在控制软件显示“聆听”(listening)时，同时按下s5的音量和静音键。
To get started, the instruction card says to open the Controller software on the Mac or PC, and then, while it's "listening," press the volume and mute keys together on the S5.
通过系统组成、控制电路、硬件结构及软件框图，对系统的工作原理作了较为详细地说明。
The working principle of system is described in more detail through system composition, control circuit, hardware structure and software block diagram.
分别说明了系统的探测器、区域控制器和集中控制器的设计，还有系统的通讯方式，软件的设计思想以及系统的探测算法。
And discuss the detector, local controller and remote controller of the system, the communication mode of the system, the thinking of software design and the arithmetic of the detector in detail.
说明了改造的测点、使用的在线仪表、硬件实现方案以及控制系统的软件平台和实现方法。
The improved measuring points, used on-line instruments, implementation scheme of hardware, software platform and execution manner of control system are described.
并以三相半波可控整流电路、滞环比较方式的电流跟踪控制、利用S函数实现空间矢量脉宽调制为例说明了软件的使用方法。
Three-phase half wave controlled rectifier, hysteresis comparison mode current track control, and realization of SVPWM by S-Function are used as examples to describe the usage of the software.
分析了吸液率的测量原理，对测定装置控制系统的硬件结构、软件设计和HMI画面组态进行了较详细的说明。
The detail of its control system on hardware configuration, software design and HMI pictures configuration have been illustrated.
文章简要说明系统设计思想、微机控制系统的硬件结构及各子系统软件功能。
It also shortly explains the consideration of the system design, structure of the hardware in the control system of the microcomputer and function of the software in every sub - system.
介绍了运用远程控制软件远程维护铁路信息系统的解决办法，并举例说明。
It was given examples, which introduced the solutions of remotely maintaining Railway Information Systems used remote control software.
本文介绍了以单片机系统来实现一个飞行器的控制系统，详细说明了其中的软件设计技巧。
The paper introduces a design to achieve the flyer's control system with a single chip computer and enter into details on the software design technique.
例如，对于信息技术系统而言，变更控制系统可以包括每一软件组件的技术规定说明书(脚本、源代码、数据定义语言等)。
For example, for information technology systems, a change control system can include the specifications scripts, source code, data definition language, etc.
另外研究了控制系统的硬件设计和软件编程及采用计算机控制的具体实现方法，较全面说明了复杂计算机控制系统的设计过程。
In addition, the hardware designing and the software programming, also the computer realization method, is studied, so the whole complex design process of the computer control system is studied.
简要阐述了电场除尘器的原理，对其中的电源部分和单片机控制部分以及在开发过程中应当注意的问题做了详细地说明，并给出了相应的软件流程图。
Introduces the principle of electrical field dust catcher, and explains the power part, single chip microprocessor controlling part and attention in details. And the software flow chart is showed.
例如，对于信息技术系统而言，变更控制系统可以包括每一软件组件的技术规定说明书脚本、源代码、数据定义语言等。
For example, for information technology systems, a change control system can include the specificationsscripts, source code, data definition language, etc. for each software component.
设计了一个用于在微细电火花加工控制中放电参数检测的高速数据采集系统，对其硬件电路进行了分析和讨论，并给出了软件说明。
A high speed data acquisition system for measurement of Micro EDM discharge parameter is designed. The hardware circuits are analyzed and discussed, also the software function is present.
说明了控制系统功能、系统工作原理、软件设计程序和操作特征等。
Functions, working principle and software design procedure of the control system are introduced.
介绍了包头钢铁公司转炉炼钢过程控制级的软件结构，详细地说明了应用软件、基础软件。
To introduce the software structure of computer process control system for LD converter of Baotou ironand Steel Corporation.
开发了一套基于ASIC的变电所控制系统图形组态软件，并在本文中对图形组态软件中的图形编辑实现和VHDL文件的生成进行了说明。
A graph configuration software for ASIC-based substation control system is developed, the graphic edit and creation of VHDL files are explained in detail.
对系统的总体结构、硬件配置、软件功能以及控制站节点功能分别进行了技术说明。
The architecture, hardware con - figuration, software functions and the functions of control nodes are described technically.
其中重点介绍了PLC的硬件组成及软件结构，并对PLC的双网冗余控制做了说明。
It mainly (introduced) the composing of hardware and the configuration of software, and it explained how PLC realizes the function of double-network redundance.
详细说明了用BC D码拨盘开关控制步进电机步数和速度的方法及可编程序控制器编程软件实现脉冲分配器功能的方法。
It explicates the ways of stepping motor's stepping count and speed in the control of the BCD-code dial switch, and the function of pulse distribution with the programmable soft of PLC.
就其电源的主体结构，主电路的原理及控制电路的工作原理作了简要的论述，同时对系统的软件也进行了简要说明。
The main structure of power supply, working principles of main circuit and control circuit are described in brief. At the same time, the software of the system is explained.
介绍了闭路电视前端设备控制系统的原理和作用，着重说明了电源控制、信号切换控制的原理和电路，以及控制流程图与软件。
The principle and the action of CATV device control system is introduced. The hardware and the software of the controller of power, how to deal with the switch method of remote signal is explained.
例如，对于信息技术系统而言，变更控制系统可以包括每一软件组件的技术规定说明书(脚本、源代码、数据定义语言等)。
For example, for information technology systems, a change control system can include the specifications (scripts, source code, data definition language, etc.) for each software component.
并介绍了污水处理过程中加药系统的工作原理和基本结构，对控制系统的硬件电路和软件流程进行了详细说明。
The working principle and the basic structure of the coagulant-adding system are introduced and the hardware circuit and the software flow are explained in detail.
本文介绍了一种基于电子工作台(ewb)软件设计交通信号灯自动定时控制系统的方法，说明了计算机仿真软件在电子实验中的效用。它改变了传统的设计方法。
The paper presents a method of simulation on auto-timing system of traffic lights based on EWB, which has changed the traditional design method, and illustrates the method of design and simulation.
介绍了控制系统的硬件和软件设计，按功能模块说明了以16位单片机为控制核心的硬件电路，并给出了软件流程。
The function module of the system with the 16-bit micro-controller as the central unit is illuminated. This thesis gives the software process.
介绍了以单片机为核心的太阳能路灯控制器的设计，对系统的硬件和软件设计做了说明。
The design of solar street lamp controller based on microcontroller is introduced. The hardware structure and software design are given.
结合电子束单晶熔炉对控制系统的要求，分别对控制软件的作用和构成进行了详细的说明。
According to requirement of control system in electron beam single crystal furnace, hardware composition and software functions of the control system are described in detail.
最后通过对软件开发过程中所用到的一些泵、阀等的使用说明来介绍包括主控制台、压载作业在内的界面操作。
Finally introduced including the main control console, the ballast work interface operation through the operating instructions of some pumps and valve which used during exploiting the software.
软件实现了调速系统的双闭环调节，其中速度环采用滑模变结构控制，电流环则是经典的PI控制。试验结果说明该调整系统有较好的动态和静态性能。
The software comes true the double closed loop regulator, therein the velocity loop is the variable-structure control, and the current loop is the classical PI control.
应用推荐