当电动装置规格确定之后，其控制转矩也就确定了。
When the electrical device specification is established, its control torque also determined.
驱动电机使用三角波驱动器控制角度，负载吸收电机通过矩形运动控制转矩。
The drive motor USES triangular wave drives for Angle control and the load absorption motor USES rectangular movements for torque control.
提升机由ABB公司最先进的ACS600驱动系统提供5000千瓦同步电动机来驱动，控制转矩和速度以提高矿石运输的效率。
The hoist will be driven by a 5,000 kilowatt (kW) synchronous motor powered by ABB's state-of-the-art ACS 6000 drive system to control torque and speed for energy efficient ore haulage.
定子磁场定向的直接转矩控制逐渐被广泛应用于高性能异步电机调速系统。
The stator flux-oriented direct torque control is widely used in high performance motion control of induction motors.
该文提出一种新的提高起动转矩的控制策略。
This paper presents a new control strategy to improve starting torque.
针对基于直接转矩控制的感应电动机在低速运转时存在较大的转矩脉动问题，该文提出一种新的控制方法。
Due to the large torque ripple of inductance motor based on direct torque control, especially at a low speed, this paper proposes a new control strategy.
针对基于直接转矩控制的感应电动机在低速运转时存在较大的转矩脉动问题，提出一种新的控制方法。
Due to the large torque ripple of inductance motor based on direct torque control, especially in a low speed, this paper proposes a new control strategy.
实现了一种基于转矩绕组气隙磁场定向控制的无轴承异步电机控制系统。
A control system of bearingless induction motor based on torque winding air gap field oriented vector control is accomplished.
本系统能够完成发动机的转速、转矩的高精度控制与测试，以及发动机温度、压力、油耗等指标参数的测量。
This system can complete the engine rotational speed and torque high accuracy control and the test, also engine temperature, pressure, oil consumption parameters survey.
基于此，提出了一种基于转矩绕组转子磁场定向的控制算法。
In this case, a nonlinear control algorithm based on rotor flux orientation of motor winding is proposed.
对于电动机起动需要控制起动电流和转矩震动的问题，采用双闭环的控制方案，即电流闭环控制和功率因数角闭环控制。
As for the problem the high current and the vibration of the torque, the double closed loops which include the current and power factor Angle are worked out.
文中提出了一种新型的开关频率固定的转矩控制器。
In this paper a new torque controller with fixed switching frequency is proposed.
在直接转矩控制理论基础上，推导出一种基于定子磁链矢量增量来确定定子参考电压矢量的新型无速度传感器直接转矩控制方案。
This paper obtains a new speed-sensorless direct torque control scheme for induction motor based on calculating the stator flux vector increment to determine the stator reference voltage.
随后进行了控制策略和控制软件的设计，完成了助力表、电机目标转矩和电机电流的PID控制。
Later, the control strategy and the software have been designed, the primary target is to get the assisting table, assisting torque of the motor and PID control of the current.
通过使用最大功率点跟踪控制技术，根据发电机转矩适当地控制发电机的速度。
The torque of IPMSG is suitably controlled according to a generator speed by maximum power point tracking.
本文介绍了一种可互换模型参考自适应方法实现对电机转速和定子电阻的辨识，并将其应用于异步机的无速度传感器直接转矩控制中。
A mutual model reference adaptive method for the rotor speed and stator resistance identification is proposed in this paper to implement a speed sensorless direct torque control of induction motors.
介绍用模糊自适应系统控制开关磁阻电机使转矩脉动减小的方法。
It is presented a method using fuzzy adaptive system to obtain torque ripple reduction in switched reluctance motor.
控制器设计为转矩控制方式，给汽车提供连续可调的起动、助力和制动转矩；
To give the HEV any magnitude torque within rated torque for starting aid and braking, the controller is implemented with direct torque control.
车体控制系统为速度控制模式，电缆盘控制系统为转矩控制模式。
The vehicle control system runs in velocity mode. The cable drum control system runs in torque mode.
电机调速方法采用直接转矩控制技术。
速度辨识是无速度传感器直接转矩控制的核心问题。
The speed estimation is core question of the speed sensorless direct torque control system.
直接转矩控制是一种新型的高性能的交流调速控制技术。
Direct torque control (DTC) is a new kind of high-performance AC timing control technique.
直接转矩控制是一种新型的高性能的交流调速控制技术。
Direct torque control (DTC) is a new kind of high-performance AC timing control technique.
应用推荐