计算机应用领域包括科学计算、数据处理和信息管理、自动控制、辅助设计制造和测试、系统仿真。
Computer applications including scientific computing, data processing and information management, automatic control, computer-aided design manufacturing and testing, the system simulation.
通过受电弓主动控制系统的设计和对其的仿真研究，理论上降低了弓网系统接触压力的波动，从而改善了受流质量。
The design of the pantograph's active control system and the study of the simulation results reduce the fluctuation of the contact force theoretically and thus improve the current collecting quality.
实际系统的仿真结果表明，本论文所设计的智能控制器具有良好的稳定性和鲁棒性，能够很好地满足工程中所要求的性能指标。
The results of simulation and test of actual system shows that the intelligent controller has good stability and robust, it can satisfy well the performance guideline of the project.
并进行了仿真研究，结果表明，基于稳定性而设计的模糊控制系统不仅具有良好的动态及稳态的性能，而且具有很强的抗扰能力。
The simulation results show that fuzzy control systems which are designed based on the stability have not only good dynamic and steady state feature but also strong rejection ability to disturbances.
本文探讨“计算机控制系统”低成本实验装置的设计、制作及其在研究型实验中的应用，即物理仿真技术的应用。
This paper discussed the design of low cost experimental installations and their applications in the experiments on the study of computer control systems by physical simulation.
针对各类对象，分别讨论了基于稳定域最优PID控制器的设计及进一步改进，并进行了大量仿真实验。
The design methods and further improvement of optimal PID controller for these plants are investigated respectively and a lot of simulation experiments are performed.
本文设计了基于DSP56F805，由速度和电流反馈控制回路构成的伺服系统实时仿真软件，并给出了其设计和编制过程。
This paper illustrates the emulation software architecture of the system based on DSP56F805. The design and implementation of the speed and current feedback loop are described in detail.
仿真结果表明，所设计的模糊神经网络控制器能有效地减少单交叉口平均车辆延误，具有较强的学习和泛化能力。
Results of simulation show that the fuzzy neural controller can not only decrease the average vehicle delay but also possesses excellent abilities of learning and generalization.
以碱回收炉的水位控制为例具体论述调整系统控制量的模糊pid控制器的设计、2- D控制表的建立、以及控制器计算机设计与仿真的实现。
It describes the fuzzy PID-type controller design of the alkali boiler water level, the build of 2-d control table, the realization of the computer design and simulation of the controller.
仿真结果表明，所设计的滑模变控制器使助力电机具有很好的动态性能，系统基本无抖动现象，实现了助力电机输出电流对目标电流的跟踪特性。
The simulation results show this control system has good dynamic property and negligible vibration, and efficiently makes the output current of direct motor trace the intent current.
采用计算机对卷取张力控制系统仿真，可以快速获取系统设计参数和这一参数时的系统性能，使现场调试变得方便快捷。
For simulation of winding tension control system using computer, the parameters about system design and the system performance with these parameters can be quickly obtained.
本文给出了适于无人机飞行控制的集成化实时仿真设备的设计与实现技术，着眼于工程实践和应用。
The design and realization technology suitable for integrated real-time simulation device of UAV flight control are presented. The practice and application is emphasized.
文中对带有自动驾驶仪飞机投弹的稳定性进行了分析，对其过程进行了仿真研究和控制律优化设计。
The paper analyses the launching missiles stability of aircraft with auto-flight system, and simulates the process of launching and optimizes the control law of the auto-flight system.
本文建立了该混合悬浮系统的数学模型，分析了它的一些性质，采用定气隙控制指标，设计了使系统稳定的控制器，并对所设计的控制器进行了仿真。
In this paper the mathematical model of this hybrid suspension system is induced, its characteristics are analyzed, and a controller is designed to ensure its fixed suspension gap.
将设计好的制导控制算法嵌入六自由度弹道模型中进行验证，仿真结果表明了此快速仿真架构的正确性和制导、控制方案的可行性。
The GNC algorithms designed are embedded in the trajectory model. The results show that the simulation structure is valid and the GNC schemes are feasible.
从仿真设计原理、仿真控制机制、模型内部结构和模型算法三方面研究防空火力抗击效果的仿真模型。
The simulation model of air defense fire oppugning effect was based on simulation design theory, simulation control mechanism, model internal structure and model algorithm.
对比仿真试验的结果表明，设计出的最优PID控制器性能优于常规的PID控制器。
In comparison with simulated experiments, the results show that the performance of the optimal PID controller is better than that of the conventional PID controller.
数据采集系统触发电路、随机采样短时间产生电路、存储器地址计数器电路等相关控制电路的设计、仿真和调试；
The circuits revelent to data acquisition system such as trigger circuit, the circuit of short time generator in random sampling etc, are designed, simulated and adjusted.
在MATLAB6.5环境下，通过编写和调试m文件，对电弧炉电极调节系统PD控制器进行设计与仿真。
Afterwards, the PD-controller of electrode regulator system of electric arc furnace is designed and simulated on MATLAB6.5 by compiling and debugging M-files.
系统地介绍了智能控制器的设计并给出其系统仿真特性，同时对整机系统各部分功能也作了剖析。
The design of the intelligent controller, the phantom quality and the functions of every part of the system are theorically analyzed.
对相同的路口进行定时控制设计。借助VISSIM仿真软件，分别对其定时控制方式和感应控制方式进行仿真和分析。
Carries on timing control at the same crossings, and based on the VISSIM emulational software, simulates and analyzes the way of timing control and actuated control.
利用滑模变结构控制方法设计控制器、进行仿真，并与传统的PID控制进行仿真对比，以验证其在减摇效果上的优越性。
Using sliding mode variable-structure control method to design controller, carry on stimulating and make contrast with the traditional PID in order to justify its superiority in stabilized effects.
根据以上设计，结合导引头模型、复合控制系统模型、弹体运动学模型、目标机动模型，给出上述设计的仿真结果。
Finally, present the simulation result of above design combining seeker handing-off model, compound control system model, projectile body kinematics model and target maneuver model.
文中分析了云模型的非线性映射特性，同时给出了基于此结构模型的智能控制器的设计方法及仿真实例。
This paper analyses nonlinear mapping characteristics of cloud model, presents the design method of the intelligent controller based on the structure model, and shows some simulation examples.
介绍在仿真变电站断路器控制回路仿真设计中，如何利用双位置继电器解决断路器机构触点仿真设计的问题。
It is described in this paper that how to use two-position relay to solve simulation design of contact of CB in control circuit of simulation substation.
仿真结果表明，本文所提出的控制策略和仿真模型能满足该混合动力城市客车驱动系统的设计要求。
From the results of simulation, the control strategy and simulation models can meet the need of the design target for the hybrid electric city bus powertrain.
通过对一个非线性质量块-弹簧-阻尼器系统输出反馈控制器的设计和计算机仿真，验证了方法的有效性。
The output direct feedback controller design and simulation results of a nonlinear mass-spring-damper mechanical system show that these methods are effective.
第四章讨论了磁浮列车紧急制动控制系统的设计，并给出了列车紧急制动仿真结果，仿真结果表明控制器的设计是有效的。
In the chapter four, I discussed the design of the maglev train braking control system and lay out the simulation results. The results show that the design is feasible.
第四章讨论了磁浮列车紧急制动控制系统的设计，并给出了列车紧急制动仿真结果，仿真结果表明控制器的设计是有效的。
In the chapter four, I discussed the design of the maglev train braking control system and lay out the simulation results. The results show that the design is feasible.
应用推荐