阐述了控制系统的软件设计。
在硬件电路的基础上，进行了控制系统的软件设计。
Paper designs software of control system basing on the hardware circuit.
该方法应用在机器人实时控制系统的软件设计中具有较好的效果。
The application of the method had good effects on design of the software for robotic real-time control system.
控制系统的软件设计包括两个部分，下位机和上位机的软件设计。
The software design of the system consists of two parts, DSP software design and host computer software design.
再次，论文分析了基于PC/104的嵌入式运动控制系统的软件设计。
Then, the software design of the embedded motion controller which based on the PC/104 bus is analyzed.
控制系统的软件设计包括底层驱动程序设计和上层应用程序设计两方面。
The software design of control system includes the driver program design and application program design.
这是一个全面的商业加热应用，如工业窑炉，燃烧器及燃烧控制系统的软件设计。
This is a comprehensive software designed for commercial heating applications such as industrial furnaces, burners and combustion control system.
随着面向对象技术的引入，面向对象集散式控制系统的软件设计可以超前于硬件环境的设计。
Following the introduction of object-oriented technology, the software design of DCS system can be done prior to the design of hardware environment.
介绍了鞍钢新2号、新3号高炉inba炉渣处理系统，并着重介绍了其自动控制系统的软件设计。
The INBA slag treatment system for Angang New No. 2 and No. 3 BFs is presented and the software design of the system is emphatically described.
概述了控制系统的电源电路、驱动电路、显示电路与软件设计及信号采集的方法。
The power supply circuit, driving circuit, display circuit, software design and signal collection of the control system are outlined.
本文介绍了这种新型教室节能控制系统的工作原理及设计方案，并且阐述了本系统的硬件组成和软件设计。
The paper introduces the principle and design of an automatic control system for classroom lighting, and hardware composing and software design of this system in detail.
给出了控制系统的硬件构成，软件设计思想和实际应用结果。
The hardware constitution, design thought of software and actual application results are given.
采用开放式架构设计将重点从硬件设计转向以控制系统为中心的系统设计，同时也增加了软件设计的灵活性。
An open architecture design will add flexibility by shifting the focus of the control systems from being hardware-centric to more software-centric.
在本次论文中，给出了控制系统的主电路图及软件设计。
At the present This thesis has the system's scheme of hardware main circuit diagram and software design.
介绍了一个污水泵站的控制工艺和控制要求，阐述了泵站自动控制系统中plc的硬件、软件设计。
The technology process and the control demands of a waste water pump are presented, and the design of hardware and software based on PLC for the pump station automatic control are described.
第二部分软件设计，按智能控制系统的模式，实现计算机对多区温度的精确控制。
The design of programming part related to the mode of intelligent control system can realize the precision control to multi-points temperature by simulation analysis in computer.
详细介绍了这个微机控制系统的硬件电路及软件设计。
The article has detailed the hardware and software design of this microcomputer control system.
介绍了CAN总线控制器在铣刨机系统中的应用，同时介绍了其行走控制系统的硬件、软件设计。
The application of CAN BUS controller in milling machine was described, the design of hardware and software in driving control system was introduced.
用TMS320F 2407作为系统核心控制芯片，对控制系统的硬件电路和软件设计进行了研究。
Additionally the control system's hardware circuit and software design are studied with TMS320F2407 as its core chip.
本文介绍了高压静电收尘器火花频度计算机控制系统的硬件组成和软件设计。
The paper introduces the hard ware composition and soft ware design of computer control system of spark frequency of high pressure static dust extractor.
介绍了检测台的工艺流程及控制要求，对PC自动控制系统的硬件及软件设计作了充分的讨论。
Introduces the process of the test and the control requirements and discusses the design for the hardware and software of the PC system.
介绍触摸屏和PLC在脉动真空灭菌器控制系统中的应用研究。重点介绍了控制系统的硬件配置以及软件设计。
This paper introduces the application study of touching screen and PLC in control system of the pulsant vacuum sterilizer. It mainly discusses the hardware configuration and software design.
在分析橡胶硫化机理的基础上，阐述了胶料硫化的控制方法、微机控制系统的组成、硬件配置和软件设计。
Based on the analysis of the theory of vulcanization, the control of rubber vulcanization, the construction of microcomputer control system, hardware and software design were described.
阐述了光纤连接器生产中的胶固化原理，着重介绍以8031单片机为核心的胶固化机温度控制系统的硬件和软件设计。
A brief principle of glue solidified in producing fiber optic connectors is presented. The hardware and software of the temperature control systems based on 8031 micro computer are emphasized.
本文的重点主要包括稳定平台伺服控制系统的硬件设计和软件设计。
The focus of this dissertation includes the Servo System hardware design and software design.
本文论述了控制系统的设计方法和设计过程，包括硬件设计、软件设计等方面。
This paper introduced the design method and research process of the control system, including hardware design, software design and so on.
本文介绍了CAN控制器的基本特点，并给出了带有CAN控制器的P 80c 592芯片在转子秤控制系统中的硬件和软件设计。
This paper introduces the basic feature of CAN controller, and presents the hardware and software design about P80C592 chip with CAN controller in the control system of rotor scale.
给出了控制系统的硬件配置和软件设计方案。
Gives the control system hardware configuration and software design.
基本勾勒出整个控制系统的硬件和软件设计基本框架，详细描述一些实验中的具体的细节问题。
The basic design frame of the hardware and software of the whole control system is given here and some concrete problem in the experiments is described here in detail.
以某电厂水处理系统为例，着重从反渗透装置的控制系统仪表配置到自动控制的软件设计等方面做了论述和总结。
As a example of a water treatment system, some aspects from control system instrument configuration of reverse osmosis device to software design of automatic control are demonstrated.
应用推荐