建立了驾驶员最优控制模型，提出了飞行控制系统优化设计目标函数和设计方法。
The pilot's optimal control model is investigated. The optimal design destination function and method of flight controlling system have been proposed.
以多回路高阶非线性控制系统为例，介绍MATLAB环境下控制系统优化设计的方法。
The method of optimal design for the control system with MATLAB is introduced, by taking a multi high order nonlinear system for example.
本文阐述了一个基于动态数学模型及启发式优化策略的连续加热炉计算机控制系统的设计与实施。
The design and implementation of reheating furnace computer control system based on the dynamic mathematical model and the heuristic optimization strategy is discussed in this paper.
设计了基于CAN总线的预焙铝电解槽计算机控制系统的总体方案及基于混沌优化的电解质温度模糊控制器。
The computer control system scheme of Aluminum electrolytic cell based on CAN bus and Fuzzy controller based on chaos optimization are designed.
针对研究对象，在高度控制系统设计中，引入多目标多约束的随机射线优化方法。
Based on the research object, the random radiation optimization of multitargets and multi-restrictions is introduced into the design of altitude control system.
介绍了利用有限元分析软件ANSYS，对压电智能结构的主动振动控制系统进行优化设计的方法。
A method of optimum design on active vibration control system of piezoelectric smart structure using finite element analysis software ANSYS was introduced.
研究了楼上或舰艇船舶上机电设备的隔振和吸振综合控制系统的功率流传递特性及优化设计。
The transmission characteristics of the power flow and the optimum design of vibration isolation & absorption synthetic control system of machines on upstairs or on aboard, are studied.
本文介绍的方法适用于纵向或侧向的飞行控制系统，可对系统中十二个参数作优化设计。
The procedure presented in this paper applies to the design of longitudinal or lateral flight control systems and to the selection of twelve parameters of a system for optimization design.
基于混沌变量，提出一种神经网络自适应控制系统的优化设计方案。
In this paper, the optimization design for self-adaptive control system of feed-forward neural network is proposed based on chaotic variable.
结合共轭梯度法，借助于MATLAB软件，提出一种控制系统校正环节优化设计的新方法。
A new method of optimisation design for the correction element in control system is stated by combining the conjugate gradient method and using MATLAB software.
利用单纯形法的参数寻优技术，提出一种控制系统调节器优化设计的新方法。
The new method of optimisation design for the regulator in control system is stated on the optimum seeking technology of parameters by using the simplex method.
所建立的轧制模型可用于环轧控制系统的设计与轧制规程的优化，对环件轧制预测和实际生产有重要的指导意义。
The proposed mathematical model can be used to design the control system and optimize the rolling strategy, and it has great significance to the rolling prediction and ring production.
本文利用单纯形优化设计方法设计反馈控制系统的调节器。
An optimum parameter design for regulators in a feedback control system by means of the simplex optimization method is presented.
为此，把智能优化方法引入到控制系统控制器参数的设计、控制对象的参数辨识中，是当前行之有效的控制系统设计方法之一。
It is one of the effective methods to introduce intelligent optimization methods to the control system for guiding the design of control systems and identifying parameters of the process model.
若将加权阵当作设计参数，则控制系统的设计可以表示为一个满足一组不等式约束的多目标优化问题。
With the weighting function matrix as design parameters, the design of a control system can be expressed as a multi-objective optimization problem with inequation constraints.
提出了现代飞行控制系统的优化设计需考虑驾驶员的操纵行为和生理限制，才能进行人-机组合优化设计。
This paper proposes that it is necessary to concern the pilot's control behavior and human limits during the optimal design of modern flight controlling system.
在应用研究中，本文结合离子膜电解槽控制的实际课题，设计了集优化、GPC控制和前馈为一体的先进控制系统。
As the part of application research of the thesis, an advanced control system combined with optimization, GPC and feedforward is designed for the project of ion exchange membrane electrolytic bath.
为飞机环控系统的动态仿真提供了新的实现途径，对飞机环境控制系统的设计和优化具有一定的参考意义。
This model provides a new approach to simulate the dynamic response of aircraft environmental system. It is helpful for designing and optimizing aircraft environmental control system.
设计了无功优化控制系统的软件体系结构，建立了动态无功优化数学模型。
The software structure of the reactive power control system is designed and dynamic reactive power optimization model is established.
一种以热力学第二定律为基础的熵产分析方法，应用于飞机环境控制系统的部件级优化设计。
An entropy generation analysis method based on the second law of thermodynamics was used to component level optimization design of aircraft environmental control system in this paper.
西门子水泥工业部营销经理MoinShaikh表示：“水泥厂生产商现在可以把重点放在优化进程，而不是基本控制系统的设计上面。
"Cement plant producers can now focus on optimizing the process rather than designing the basics of the control system, " said Moin Shaikh, Siemens cement industry marketing manager.
这一模型可作为数字调压阀设计过程中性能分析和参数优化的依据以及控制系统设计的参考。
The model can be used as the basis of performance analysis and parameter optimization in the design of digital pressure regulating valves and as reference for control system design.
本篇论文研究了“发酵过程优化操作控制系统软件”的设计和实现。
The design and application of "The Software of Optimal Operation and Control System in Fermentation Process " are studied in this dissertation.
该方法利用了MAT - LAB软件中的符号数学工具箱、控制系统工具箱和优化设计工具箱，使设计简单、快捷，提高了编程效率。
By using the symbolic mathematics tools, control system tools and optimisation design tools in MATLAB software, it make the design ease and last. The efficiency of programming is enhanced.
分析蒸气热泵的特点，提出最佳温升曲线的优化计算方法和蒸气压力预测智能控制算法，设计了纸机干燥部优化控制系统。
The property of steam ejector is analyzed. The optimize method of temperature curve and an algorithm of intelligent predictive pressure control are presented. The optimize control system is designed.
以二阶欠阻尼控制系统的设计为例，优化出系统的最佳阻尼比。
An example of finding optimal damped ratio in second order underdamped control system is given.
为减少控制系统所需能量，有必要对结构进行优化设计，而传统的优化方法对于振动主动控制系统的优化不太适合。
It is necessary to optimize the designed structures for reducing control energy, however, traditional optimization algorithms are not satisfied for vibration active control system.
建议采用实时控制系统，实现压射曲线的最优化设计。
A real time controlled system is proposed to realize the optimum design of shot curve.
建议采用实时控制系统，实现压射曲线的最优化设计。
A real time controlled system is proposed to realize the optimum design of shot curve.
应用推荐