本文介绍了基于结构图法的控制系统仿真软件的功能和实现方法。
The simulation software of control system was introduced on basis of structure diagram approach. Its functions and implementation method were described.
引黄工程运行控制系统仿真是引黄工程全系统运行计算机仿真项目的重要组成部分之一。
The operation control system simulation of WYRDP is an important part of the entire system operation computer simulation of Wanjiazhai Yellow River Diversion Project.
该控制系统仿真实验已经成功预测了水电站多种事故，反复实验证明了该系统性能的优越性。
The control system simulation experiment has been successfully predicted a variety of accidents, then repeated experiments proved the superiority of the system performance.
提出了供应链库存控制系统仿真模型的主要模块，分析了该模型中主要事件的仿真处理流程。
Then this dissertation proposes the main module of a supply chain inventory control system simulation model and analyzes the simulation process of the main events in the model.
在分析交流异步电动机数学模型的基础上，提出了交流异步电动机控制系统仿真建模的新方法。
Based on the mathematical model of AC asynchronism motor, a novel method for modeling and simulation of AC asynchronism motor control system in Matlab was proposed.
该文介绍了交互使用有限元分析软件和控制系统仿真软件实现具有刚柔耦合结构复杂系统的仿真方法。
The simulation method of the rigid-elastic coupling control system is introduced by using the interaction of the finite element analysis software and the control system simulation software.
以典型的航天员推离动作对飞船的扰动力矩作为控制系统仿真的输入参数，分析姿态控制系统受到扰动后的响应。
Put the disturbance moments of typical astronaut's push-off act as the input datas of the control system simulation, and analyze the response of the attitude control system after disturbed.
采用计算机对卷取张力控制系统仿真，可以快速获取系统设计参数和这一参数时的系统性能，使现场调试变得方便快捷。
For simulation of winding tension control system using computer, the parameters about system design and the system performance with these parameters can be quickly obtained.
本文提出了一种适用于电力电子电路自动控制系统仿真软件的图形编辑方法。叙述了图形编辑的原理、设计思想及实现方法。
In this paper, a graphic edit method of power electronic circuits automatic control system simulation is presented. This paper analyzes the principle and program method of graphic edit.
针对催化裂化装置反应再生系统，进行了动态机理建模研究，给出了可以用于过程特性分析和控制系统仿真研究的动态机理模型。
Based on mechanism analysis, a dynamic model of FCCU reactor-regenerator system is given. It can be used for simple process characteristic analysis and for control system simulation.
控制系统仿真结果表明该控制方法在控制起重机机械臂各关节平稳的跟踪给定轨迹的同时，能够实现吊重在三维空间的防摆控制。
Simulation results of the control system show it can drive the crane's joints to track the trajectory smoothly, but also can realize the anti-sway control of the load in the 3D space.
针对研发的采用一体化布置、全功率自然循环的低温核反应堆电站，建立了一个可用于大功率运行范围控制系统仿真的动态数学模型。
This paper discusses the considerations in the modeling of a new type of nuclear power plant for its control system simulation in a wide power range.
MATLAB语言在控制系统仿真与分析方面具有众多优点，文章具体分析了基于MATLAB语言的SIMULINK模型的仿真求解方法。
The computer language of MATLAB has many merits on simulation and analysis of control system. In this article the method of the SIMULINK model on MATLAB is introduced.
介绍了一种采用Matlab电气系统库实现感应电机磁场定向控制系统仿真的新方法，提出了一种调节器参数设计的方法，并结合具体实例给出了系统的仿真实验结果。
A new method for building field-oriented control system of induction motor was introduced based on power system blockset of Matlab and the regulator parameter designing was discussed.
对于本文来说，我们将着重介绍控制系统，以及在将其嵌入物理机器人之前可以对其进行仿真和验证的方法。
For this article, I focus on the control system and the ways in which you can simulate and validate it before spending time embedding it in a physical robot.
仿真让我们可以在动态的合成环境中尝试一些做法，同时可以搜集这些响应数据，从而确定控制系统的品质。
Simulation permits you to try ideas in dynamic, synthetic environments while collecting stimulus response data to determine the quality of the control system.
仿真还可以允许对机器人控制系统进行革新，这依赖于很多代控制系统的随机排列（遗传算法可以证实这一点）。
Simulation also allows the evolution of robotics control systems, which depend on random permutations of the control system over many generations (as demonstrated by genetic algorithms).
TeamBots是一个可移植的多代理机器人仿真器，它可以支持动态环境中多代理控制系统的仿真，并可以提供可视化功能。
TeamBots is a portable multi-agent robotic simulator that supports simulation of multi-agent control systems in dynamic environments with visualization.
根据无刷直流电机的数学模型和运行原理，通过MATLAB软件的SIMULINK和PS B模块，搭建了电机及整个控制系统的仿真模型。
According to BLDC mathematical model and the movement principle, a simulation model of BLDCM control system by the SIMULINK and PSB block of software MATLAB is built in this paper.
本文探讨“计算机控制系统”低成本实验装置的设计、制作及其在研究型实验中的应用，即物理仿真技术的应用。
This paper discussed the design of low cost experimental installations and their applications in the experiments on the study of computer control systems by physical simulation.
并进行了仿真研究，结果表明，基于稳定性而设计的模糊控制系统不仅具有良好的动态及稳态的性能，而且具有很强的抗扰能力。
The simulation results show that fuzzy control systems which are designed based on the stability have not only good dynamic and steady state feature but also strong rejection ability to disturbances.
通过受电弓主动控制系统的设计和对其的仿真研究，理论上降低了弓网系统接触压力的波动，从而改善了受流质量。
The design of the pantograph's active control system and the study of the simulation results reduce the fluctuation of the contact force theoretically and thus improve the current collecting quality.
步进电机控制系统的开发采用了软硬件协同仿真的方法，可以有效地减少系统开发的周期和成本。
Stepper motor control system has been developed using the software and hardware co-simulation method, can effectively reduce the system development cycle and cost.
论述了将计算机仿真技术应用于翻车机控制系统开发的可行性，并给出具体仿真方案及编程框图。
The feasibility of applying this technique in the development of the control system of tippers is demonstrated with the concrete emulation scheme and a programming flowchart.
仿真结果表明，此功率因数控制系统在空载和轻载时，可节能30%—50%，本论文为异步电动机的节能运行提供了重要的参考作用。
The simulation result demonstrates that it can save up capacity about 30-50% when there is no load or a little load. This thesis can provide important reference function.
提出一种矿山液压工程机械的空载怠速全自动控制系统，分析引起仿真和实测结果差异的原因。
In the paper puts all-automatic control system of noload idling for mine hydraulic-engineering machine different of cause analysised emulation and practical measure.
该系统通过实现了一个基于光纤通道协议的原型系统得到验证，已成功应用于飞行控制系统与飞行仿真系统之间的通信。
The fly-by-light system is demonstrated with a prototype based on fibre channel protocol which has been applied to communications between flight control system and flight simulation system.
该系统通过实现了一个基于光纤通道协议的原型系统得到验证，已成功应用于飞行控制系统与飞行仿真系统之间的通信。
The fly-by-light system is demonstrated with a prototype based on fibre channel protocol which has been applied to communications between flight control system and flight simulation system.
应用推荐