目前，不能修改控制寄存器。
计数器模式控制寄存器；
串行模式控制寄存器；
该控制寄存器还具有软件转换启动与软件关断特性。
The control register also features a software convert start and a software power-down.
该实例中控制寄存器的定义和引用可用于对其他片内外设的编程。
The definition and usage of the DMA control registers is useful to the programming of other peripherals.
使用物理地址扩展位(PAE)，位于控制寄存器CR4的第五位。
Using the physical address extension (PAE) flag, located in bit 5 of control register CR4.
数据和状态寄存器可以读取而且控制寄存器和EEPROM的值可以读取和改变。
Data and status registers can be read out and control registers and EEPROM values can be read and changed.
一些个人平台提供了一种方式写这些从C控制寄存器，但是没有便携式接口，跨平台工作。
Some individual platforms provide a means to write to these control registers from C, but there's no portable interface that works cross-platform.
导入控制寄存器的值是，保留的位必须一直保留上一次读到的值。控制寄存器里的标识如下。
When loading a control register, reserved bits should always be set to the values previously read. The flags in control registers are.
利用AD 7811和AD 7812的控制寄存器，可以将输入通道配置为单端或伪差分输入。
The control registers of the AD7811 and AD7812 allow the input channels to be configured as single-ended or pseudo differential.
从设备的观点看，例如软盘控制器，它只能看见其控制寄存器所在的(ISA)空间的地址，不能看到系统主存。
From the point of view of the device, say the floppy disk controller, it will see only the address space that its control registers are in (ISA), and not the system memory.
通过增加控制寄存器的三模冗余(TMR)设计来保证存储器操作的正确性，仿真验证了该设计的有效性和优越性。
A Triple Modular Redundancy (TMR) design for control registers is used to guarantee correct operation of a memory. Simulation results illustrate feasibility and superiority of the proposed design.
可用于全部数据类型的主要优点体现在系统编程过程中的任何结构，（包括硬件控制寄存器）都可用C 语言来表达。
The major advantage of this full set of data types is that any construction that arises in system programming, including hardware control registers, can be represented in C.
在Linux程序中使用SPU需要使用一部分内核代码，因为控制寄存器只能从PPE中使用特权模式进行访问。
Some kernel code is needed to use the SPUs from a Linux application, since the controlling registers are only accessible from the PPE in privileged mode.
利用一个片内控制寄存器，用户可以设置不同的工作条件，包括模拟输入范围和配置、输出编码、功耗管理及通道序列化。
An on-chip control register allows the user to set up different operating conditions, including analog input range and configuration, output coding, power management, and channel sequencing.
当设置好这些数据结构，代码段以及系统寄存器之后，可以通过设置控制寄存器CR0的PE位(第0位)为1来进入保护模式。
With these data structures, code modules, and system registers initialized, the processor can be switched to protected mode by loading control register CR0 with a value that sets the PE flag (bit 0).
虽然系统使用的US B控制芯片是飞利浦公司的ISP1362，但是除了控制寄存器的使用不同外，US B协议栈的实现却是相通的。
Although ISP1362 is employed as the USB control chip here, the protocol stack has the same structure besides the slight difference between the control registers when other chips used.
介绍了音频模拟接口芯片TLC320AD50C的原理和使用注意事项，以及TMS320 VC 5402串行口的主要特点，并且详细分析了TMS320 VC 5402控制寄存器的配置和工作过程。
The TLC320AD50C principles and main characteristic of the serial port of TMS320VC5402 are introduced and the configuration of control registers and their process of operation are analyzed.
对虚拟化的硬件支持包括在POWER 5中引入一些新的寄存器，以及对中断控制硬件的设计。
Hardware support for virtualization includes introduction of new registers in POWER5 and the design of the interrupt control hardware.
为获得更大的灵活性，动态SQL允许通过SETCURRENTdegree语句在一个计划或包中更改这个选项，该语句可以控制专用寄存器中的值。
For further flexibility, dynamic SQL allows for changing this option within a plan or package by the SET CURRENT DEGREE statement, which controls the value in a special register.
然后保存3个用于进行程序的主要控制的非易失性寄存器。
It then saves three non-volatile registers that will be used for the main control of the program.
CURRENTMAINTAINEDTABLETYPES专用寄存器控制被考虑用于路由的 MQT的类型。
The CURRENT MAINTAINED TABLE TYPES special register controls the kinds of MQTs that are considered for routing.
kdb允许用户控制内核代码的执行(包括内核扩展和设备驱动器)，并观察和修改变量和寄存器。
KDB allows the user to control execution of kernel code (including kernel extensions and device drivers), and to observe and modify the variables and register.
字地址格式最常用。在这种格式中，每个信息元素前面带有一个字母。控制器将这个字母转到特定寄存器。
Word Address Format is mostly used. In this format, each element of information is prefixed by a letter. And the controller conveys the letter to a particular register.
执行过程中的一个阶段所需的时间，在此期间，计算机从主存储器中取出指令或操作数，并将其存入控制器或运算器的寄存器中。
The part of execution in which an operand or instruction is read from main storage and written into a control unit or arithmetic unit register.
论文分析了处理器内部部件的工作原理，详细阐述了微处理器的取指单元、译码单元、执行单元、寄存器组和控制核心的设计。
The work principle of every part of microprocessor is analyzed, and a strong emphasis is laid on the design of program counter, instructions decipher, execute unit, register group and control center.
软件上，通过设置相应寄存器的控制位，可以使单片机在不同的低功耗模式下工作。
For software, we can have the microprocessor to work with different low power modes by setting the controller bit of the corresponding register.
软件上，通过设置相应寄存器的控制位，可以使单片机在不同的低功耗模式下工作。
For software, we can have the microprocessor to work with different low power modes by setting the controller bit of the corresponding register.
应用推荐