但在Grex的系统内,水下机器人将充当一个中继站,将来自母船的控制信号传给连网的其他机器人,这种方式下的传输距离可达到数英里。
But in the Grex system, vehicles will be able to act as relay stations, bouncing a control signal from the mother ship to the networked submarines over many miles.
使用信号/插槽以灵活且可维护的方式控制对象间通信要比使用脆弱的回调风格容易得多。
With signals/slots, it is much easier to control communications between objects in a flexible and maintainable manner than it is with a fragile callback style.
有线遥控是通过专用电缆或动力线作为载波体,对信号用调制解调器传输方式,达到只用少量通道即可实现控制的方法。
Wired remote control is a dedicated cable or power line as a carrier, the signal with modem transmission mode, to achieve a small number of channels can be used to control the method.
该控制方式的指令信号通过同时检测电源电流和负载电压得到。
The reference signal in this control approach is obtained by detecting both source current and load voltage.
如果两个控制器的信号输入端并联输入,其输出端用矩阵方式连接后,将扩展成256路。
If two signal importations of controller carry to merge the importation, its exportation will expand after carry use the matrix method conjunction 256 roads.
其他常见的是CXD2500等等,依照他们的语法方式不同,有些飞利浦伺服控制器也输出EIA J信号,而不是输出i2s的。
Other common ones are CXD2500 etc etc. Depending on the way they are programed, some Philips servo controller also outputs EIAJ signals instead of I2S.
控制箱接受中控室驱动信号,由控制箱的PLC按自动方式运行;
The control cabinet receives signal from remote control cabinet and is operated by PLC in auto method.
文章论述了电容器组在不同连接方式和不同参考信号时对应的同步关合和同步切除控制策略。
This paper discusses the control strategy of synchronous switching of shunt capacitor unit in the different way of connection and different reference signal.
不同的控制信号使发光二极管以不同的方式和花样显示。
The different control signal makes LBD to give out light with the pattern in different way.
进近方式,一种综合了控制横侧的航道信号和控制俯仰下滑信号的自动驾驶/飞行指引方式。
APPROACH MODE, An autopilot/flight director mode which is a combination of localizer for roll control and glide slope for pitch control.
详细论述多频互控方式的信令信号传送,交换机DTMF信令无线信道接续与控制。
We study the transmission of signaling signal with the compelled method of multi-frequency, and study the switching control of DTMF signaling with exchange in wireless in details.
另一种采用电压控制方式,通过电压的高低进行电机的转速控制,电机的反馈信号通过驱动器反馈到数控系统进行位置控制。
Another kind of the voltage control mode, through the high and low voltage on motor speed control, motor feedback signal through the drive to the numerical control system feedback position control.
控制结构一般被描述使用结构图反射方式信号交互式。
Control structures are generally described using block diagrams to reflect the way signals interact.
针对TZJ96-3和GPJ96Z/3-C型号的加压过滤机,排料闸板与采集并控制其开关到位信号的接近开关,在安装方式上存在设计缺陷。
Being aim at pressure filter of TZJ96-3 type and GPJ96Z/3-C type, feed gate and proximity swith of collecting and controling its signal to be in position occurs as defect.
该系统应用于城市交通信号控制机上采集交通量信息,精度高,安装维护方便,优于传统的电感线圈采集方式。
The system is applied to the city traffic signal control machine, and it shows the system is better than the means using inductance coil for acquisition precision, fixing, etc.
以一种新的方式采集遥控器的控制信号,这些信号直接是数字信号,这使得对手控信息的采集更加可靠安全。
It collects the control signals of the teleoperator in a new way. Because these signals are all digital, it makes the collection more credible and safe.
分析了图像分割最佳阈值的计算方法,讨论了异色羽绒提取的信号控制方式;
The selection of the optimal threshold and the generation of bit control signal were also discussed.
简述了实现控制信号的思想,详述了HPWM的产生原理、基准正弦信号产生方式、PI调节的数字化过程。
The idea of realizing HPWM based on DSP is introduced in brief, the principle for realizing HPWM and fiducially sinusoidal wave-form and the implementation of digital PI are presented in detail.
对试验中遇到的信号滤波、传感器标定、控制方式、快速数据采集等问题作了研究。
It studies problems appeared in the test, such as signal filter, sensors' checkout, control method, and high-speed data collection.
交通信号控制系统与车辆路线诱导系统是城市交通流在线管理的两种主要方式。
Traffic signal control and route guidance are the two main ways of online administration for urban traffic.
CAT V收费控制系统有很好的信号兼容性,对信号的格式没有要求,不会因信号处理方式和信息量的多少而更新淘汰。
The CATV charge and control system has excellent compatibility with other signals and no astriction in signal format, so you doesn't need to worry about its future.
在智能家居控制系统中有很多种信号传输方式,在电力线载波方式中应用X-10协议进行信号传输是最先进也是最实用的一种。
The signal transmitted methods have many kinds in smart-house control system, using X-10 protocol transmitting signal in power-line carrier wave application is most advanced and practicality method.
该系统将可编程控制器用于铁路信号系统中并作为系统的核心控制器,取代了传统的电气集中控制方式,克服了其系统庞大,可靠性低的缺点。
This system USES PLC in railway signal system as the core controller and it replaces the additional electric centralized control mode, overcomes the disadvantages such as hugeness, low reliability.
电路采用了预启动和衬底电位选择结构,并利用三相时钟信号方式控制电荷泵的工作状态。
The latest three-phase clock signal control method was used to control the working state of charge pump.
同步控制器采用可编程器件,所有信号的时间关系均由软件设定,以计数方式产生。
The synchro controller utilized the programmable chip. Thus the time relationship among all signals were set up by software and generated in the mode of count.
不同的全制动距离阶段划分方式及其设备配置决定了高速客运专线信号控制及列车运行方式。
The signaling and operations of high-speed passenger trains depend on the braking stage design and relative equipment configuration to fulfill a complete braking process.
该系统采用光电编码器作为速度检测传感器,控制方式采用PID数字控制,控制输出采用PWM数字信号至驱动电路对电机调速。
This system USES photoelectric coder as speed detecting sensor, USES PID digital controller as control method, USES PWM signal as control output to regulate speed.
该系统采用光电编码器作为速度检测传感器,控制方式采用PID数字控制,控制输出采用PWM数字信号至驱动电路对电机调速。
This system USES photoelectric coder as speed detecting sensor, USES PID digital controller as control method, USES PWM signal as control output to regulate speed.
应用推荐