数十年来，程序员们使用模型-视图-控制器简化了代码结构，并使得维护任务更加容易。
Programmers have simplified their code structure and eased maintenance tasks with Model-View-Controller for decades.
清单9显示了控制器的总体结构，重点放在initialize方法及其执行的如下两个任务。
Listing 9 shows the general structure of the controller and focuses on the initialize method and the two tasks it performs.
本文从循环流化床结构及运行机理出发，阐述了循环流化床的基本控制任务。
This paper proceeds from circulation fluidized bed structure and operation mechanism, has explained controlling the task basically of the circulation fluidized bed.
水轮机选型设计的任务是确定水轮机的主要性能参数和结构控制参数，完成水轮机的流道设计。
The task of hydraulic turbine type design, is to decide the main property parameter and the structure control parameter, to finish the design of the pipeline of hydraulic turbine.
给出了控制系统结构、应用系统结构设计和任务动态调度策略及系统资源分配原则。
The system architecture, application program structure design, tasks dynamic schedule strategy and system resource dispatching are presented.
澳大利亚要想利用这个新机遇并能控制掌握结构变化过程，这个任务对于RBA就是需要保持低稳定的通货膨胀。
As Australia takes advantage of its new opportunities and manages the process of structural change the task for the RBA is to keep inflation low and stable.
机械臂结构设计以及多自由度的运动控制是危险作业机器人能否胜任作业任务的关键。
Whether the hazardous operation robot could be capable of task or not depends on the structural design of manipulator and motion control of Muhi-DOF.
系统采用分布式控制系统结构，将人机交互、数据采集等任务和控制任务分别交由测试计算机和控制计算机完成。
The system, which consists of a measure computer and a control computer, is established by the use of distributed control structure.
本文主要介绍微型机的单元自动控制装置在分布处理系统中的作用及其硬件结构、软件任务，以及在水电站的水轮发电机组控制中的应用。
This paper describes the function of RTU in the distributed system as well as its hardware construction and software task, and recommends its application to the control of water turbine generators.
根据寻北系统的功能要求，软件设计采用实时控制系统事件驱动的程序设计方法构造了寻北系统的多任务软件结构。
According to the function demands of north-finding system, software design builds multi-task software structure of north-finding system based on event driven mechanism in real time control system.
运用分析技术，如结构理想化、控制理论、电路和机械系统类似物来模拟宇航员执行任务。
Use analytical techniques such as structural idealizations, control theory, electrical circuit and mechanical system analogs to model astronaut performance.
运用时分多任务程序结构构建系统控制软件，解决外设响应慢对实时系统地制约，从而提高程序执行效率。
Time-sharing multitask that solve slow response reaction of peripheral has powerful utilities to build embedded software system, advance efficiency for program.
整机控制软件设计：对控制系统软件从结构、功能任务、界面菜单等方面进行了系统的规划和设计。
Controlling software system design: planning and designing the controlling software from structure, function and task, interfaces, etc.
针对现代航天器对控制任务的需求特点，基于航天器对象特征模型知识描述，提出了具有多层结构的智能自适应控制系统概念。
According to the requirements of modern spacecraft control, this paper presents a hierarchical intelligent adaptive control system based on the description of plant feature model knowledge.
讨论了一种基于PC总线的PC数控系统的结构及其有关的关键技术问题，并提出了该结构下数控系统软件的一种实时控制任务调度的面向对象实现方法。
This paper discusses a PC-NC system based on PC bus and some relevant key technologies, and presents a method of realization of dispatching real-time tasks in the software part of system.
结论：参与冲动控制任务的脑神经结构非常复杂，其中前额叶、扣带回可能起关键作用。
CONCLUSIONS: There are much neuromechanisms related withmultiplicity impulsivity. Frontal cortex and cingulate gyrus may besignificant role in these neuromechanisms.
每层均采用模块化、开放式结构，从而分散了控制任务，有利于提高机器人的智能化程度。
The control system distributes tasks to all embedded computers among 3 layers, so that the intelligent degree of robot is enhanced.
操纵系统与电器控制系统相比，所承担的控制任务非常精简明确，结构上更是要简单许多。
Control system and electrical control systems, mission control borne by the very concise clear, the structure is simple to many.
通过对集成多机器人和多传感器的焊接柔性制造系统进行焊接生产任务执行过程的分析，提出了针对焊接柔性制造系统的多智能体控制系统结构。
We constructed an architecture of multi-agent control system for WFMS by analyzing the welding manufacturing processing of a WFMS with multi-manipulator and multi-sensor.
目标控制程序的设计采用多任务调度，使其结构通用，尽可能满足各种控制要求。
The structure of control program is designed as multi-task scheduling to be general to fulfill various control requirements.
基于多cpu模块化硬件结构，控制系统的软件结构也是模块化的，各软件模块配合相应的硬件模块完成专门的任务。
Based upon the multi-CPU modularized hardware, the software of this system is divided into several parts. Each part performs a special task in cooperation with the corresponding hardware board.
在参考多智体系统的基础上，根据大系统控制论的分解协调思想，提出一种软件人群体体系结构，并对其关键技术如本体库、知识库、任务库、通信协议、角色模型、交互模型等进行了描述。
Based on the ideas of decomposition and coordination of large systems cybernetics, a kind of architecture for SoftMan group is put forward on the basis of reference to many multi-agent systems (MAS).
其嵌套结构形式的设计实现了控制信息在系统内的有序流动和传递，并使任务单元具有智能特征，能够协调和控制下层模块的运行。
The nested structure makes the information transmission smoothly and makes the task units intelligent to coordinate and control the modules at lowlevel.
文章提出了用任务层次结构具体描述、控制电气工程设计过程的方法。
This paper proposes an approach to represent the process knowledge for electrical engineering design by using task hierarchy structure.
本文首先讨论了计数器模块的结构对微控制器系统时间事件处理任务效率的影响。
Firstly, the structure of the counter module and its impact on efficiency of the time event handling are discussed.
本文首先讨论了计数器模块的结构对微控制器系统时间事件处理任务效率的影响。
Firstly, the structure of the counter module and its impact on efficiency of the time event handling are discussed.
应用推荐