分析链条和链轮啮合时，链轮和滚子的接触强度。
And analyze the contact strength of the roller and sprocket wheel while in meshing process.
同时具有接触强度高，耐磨损，传动效率高等优点。
Additionally, it has advantages of higher contact strength, wearproof and efficiency in transmission.
研究推导了外波式活齿减速器中接触强度的计算公式。
This paper investigates the contact fatigue strength comparison of laser-hardened gear and (carburized) gear.
从而为内啮合直齿轮的接触强度及其可靠性分析奠定基础。
Thisestablishes the basis of contact strength and reliability studies of internal spur gears.
改善润滑性能和提高接触强度是蜗杆传动研究的一个重要目的。
The problem to improve the lubricating performance and to increase the contact strength are important objects in the studys of worm gearing.
分别提出了弯曲与接触强度端面载荷系数的定义式和新的计算式。
The definition formulas and new calculation formulas for transverse load factors of tooth strength and surface durability are proposed.
最后，对马达的薄弱零件——叶片进行了弯曲强度与接触强度的校核。
Finally, the weak part of the motor -the blade has been carried on crooked intensity and check exposed to the intensity.
在此基础上导出了活齿与激波器、活齿与内齿轮啮合处的接触强度的公式；
Based on it, the formulae of contact strength of mesh points between the movable teeth and the surge wheel, the movable teeth and the internal gear are derived.
为了与基于相对熵方法的蛋白质设计工作进行统一，采用了新的接触强度函数。
A new contact intensity function is given to consist with protein design research based on the relative entropy.
强调了齿面硬度、面粗糙度、滑情况、用前磨合情况等对齿轮接触强度的影响。
It also expounds influences of hardness and roughness of teeth surface, lubrication, running-in before use on touch strength of gear.
有效杜绝由于传统人工手动接 线的接触强度不一致所造成的接线接触不良现象。
The invention effectively puts an end to the phenomena of poor contact of connection caused by the discordance of contact strength of traditional manual connection.
对齿轮齿面损坏造成的齿轮失效进行了分析，并提出了一些提高齿轮接触强度的方法。
This paper analyzes gear failure resulted by damage of teeth surface and puts forward some methods improving touch strength of gear.
依据赫兹接触强度计算理论，着重研究了圆柱滚子轴承内、外圈及滚动体的接触应力。
Beased on the theory of Hertz stress, the contact stress of roller bearing is analysed in this paper.
在机构强度分析中，阐述了凸轮-针轮副啮合齿面接触强度、针齿销的弯曲强度计算和刚度计算。
Not only the contact strength between the CAM and the rollers is discussed, the flexural strength and rigidity of the rollers are also discussed.
其重合度比点嘀合齿轮大，接触强度和弯曲强度高，而且加工制造方便，因而能够普遍推广和应用。
Since there is a greater overlapping, a higher touch stress and bending stress, and also it is more convenient to manufacture, this trans...
其重合度比点嘀合齿轮大，接触强度和弯曲强度高，而且加工制造方便，因而能够普遍推广和应用。
Since there is a greater overlapping, a higher touch stress and bending stress, and also it is more convenient to manufacture, this...
用模拟快速试验与实际试件试验的对比方法，对齿面接触强度进行了研究，表明两者之间有异同之处。
The contrast method of simulated accelerated test and sample test has been used to investigate contacting surface strength of gears and both similarities and differences have been found between them.
通过对非对称渐开线圆柱直齿轮齿根弯曲应力的分析，结合接触强度的计算公式，建立了系统的数学模型。
Having analyzed the dedenda's bending stress of involute gears with asymmetric teeth, and the formula of contract strength, mathematic model of the system is built.
张光辉教授认为：分阶式双渐开线齿轮具有良好的工艺性能、弯曲强度和接触强度高、最少齿数小等优点。
Prof. Zhang holds that double involute gear with ladder-shaped teeth possesses the advantages of good technology, high bending strength, high contact strength and fewer teeth.
圆锥齿轮的设计包括：几何尺寸的计算，校核接触强度，齿根弯曲强度校核，齿轮各检验项目及公差值的计算。
Circular cone gear design include: geometry calculation accuracy contacts intensity tooth root bending intensity accuracy, plus the value of the test items and business computing.
由于该齿轮的齿根厚度比普通渐开线齿轮的齿根厚，并且节点附近不相接触，因此，其轮齿弯曲强度和接触强度都提高。
Because of the tooth thickness of the dedendum is larger than that of the common involute gear and the Pitchs do not contact each other, the beam strength and surface strength of tooth are increased.
本文应用有限元参数二次规划法求解采煤机牵引行走机构齿轨接触强度问题，介绍了有限元建模和网格划分，分析了计算结果。
The paper deals with the contact strength problem of tractive mechanism of shearer by the finite element parametric quadratic programming method.
通过推导这种新型齿轮齿面诱导法曲率，分析了接触强度得以提高的原因。同时用切齿法进行研究后得出，该齿轮还具有较高弯曲强度。
It is shown that this gear is of both high bending strength and high contact strength by analysing and studying its induced curvature and cutting methods.
本文通过八对圆弧齿线圆柱齿轮的运转接触疲劳试验，得到了45钢正火齿轮的接触疲劳极限应力框图，可供圆弧齿线圆柱齿轮传动的接触强度计算参考使用。
In this paper, contact endurance limit diagram of 45 normalizing gear is obtained from contact fatigue teste on 8 pairs of CATT gears. It is worthy reference for a calculation of gear design.
这种材料的选择很简单：鞋材以一层碳纤维为主，碳纤维能提供鞋子必须的支撑强度，也很有弹性，接触脚的一面贴着皮革，鞋底的一面贴着橡胶。
The material choice is simple: the shoe is a laminate with Carbon fibre for the core which gives the shoe its spring and strength, leather on the foot side and rubber on the walking wearing side.
迄今为止，没有任何研究表明存在一致的证据，证明接触射频场强度低于造成组织发热的限值，会产生不良健康后果。
To date, research does not suggest any consistent evidence of adverse health effects from exposure to radiofrequency fields at levels below those that cause tissue heating.
如果人体组织和电极之间的有效接触面积保持不变，那么高频电流强度扩大一倍将会使电流密度增大一倍，并产生四倍的热量。
Doubling hf-current results in a doubling of current density and a fourfold heat provided that the area of effective contact between the tissue ang the electrode remains constant.
其危害程度取决于噪音强度大小和接触时间的长短。
The hazard depends both on the intensity of the noise and the duration of the exposure.
本文对渐开线点啮合齿轮减速器进行了性能试验、接触疲劳强度和弯曲疲劳强度试验，同时还进行了铁谱分析。
This paper describes the performance test, contact fatigue strength test and bending fatigue strength test on the gear reducer of involute point contact Ferrographical analysis is made.
辊子的一些特性，例如：强度、耐热性、抗拉强度、接触疲劳强度都和剥落有关。因此，强度可作为硬度的参数来研究。
Some characteristics of the rolls, such as strength vs. Thermal shock, tensile strength and contact fatigue strength, influence spalling. Thus, strength was investigated as a hardness parameter.
应用推荐