接触式测量可靠性高,但是精度低。
目前,数字化方法主要分为接触式和非接触式测量。
At present, the methods of digitization mainly include contact measurement and non-contact measurement.
然后探讨了接触式测量中测量路径的生成及其优化方法。
Then the path generating for contact measure and the methods to optimize it are discussed.
研究了服装数字化立体裁剪中的人体非接触式测量技术。
This article describes a non-contact body measurement system for garment design.
鉴于此,采用面阵CCD对钻杆受磨损部位的直径进行非接触式测量。
Therefore area array CCD is adopted for the non-contact measurement of the diameter of the abrading section of the drill pipe.
本文提出了一种用光栅分光干涉法测量磁盘平面度的非接触式测量方法。
A grating-differential interferometer for measuring magnetic-disc surface is discussed in this paper.
通用激光测量仪采用非接触式测量方式进行零件的尺寸与行位公差检测。
The proposed general laser measuring instrument can detect dimensions of work piece and tolerance with non contacting mode.
介绍一种使用非接触式测量方法—超声测距法对作物高度进行测量的装置。
The paper introduced an untouched method—ultrasonic distance measurement that is used to obtain the crop height.
传统的接触式测量方法很难实现由多个非连续铅垂面形成大平面的平面度的检测。
Its very difficult to achieve the flatness detection of the large flat surface formed with several non-continuous vertical planes with traditional contact measurement.
线阵CCD器件以电荷耦合理论为基础,在非接触式测量领域得到了广泛的应用。
The component of linear-array CCD based on the theory of electricity coupling is widely used in non-touch field.
分析了逆向工程中自由曲面的反求过程,对接触式和非接触式测量方法进行了比较。
The process of constructing free-form surfaces in Reverse Engineering and compares the untouched and touched measure methods was alysed in this paper.
本文以磁流体发电通道中高温高速气流为测量对象,阐述了非接触式测量流速的方法。
For gas flow at high temperature and high speed in MHD-channel, a method of measuring gas velocity without physical contact is discussed in this paper.
DSU35的非接触式测量原理是完全无磨损的,因而确保了长使用寿命和稳定的精度。
The contactless measuring principle of the Ri-DSU35 operates absolutely wear-free, thus ensuring a long service life and constant precision.
核辐射物位计在聚酯化工、冶金、制药等行业的反应釜非接触式测量中得到了广泛应用。
The nuclear radiation material level meters are widely used in contactless measurement of the reactors in polyester chemical, metallurgical, pharmaceutical, and other industries.
以CCD获取测量信号为基础的激光三角法测量技术被广泛运用于物体的非接触式测量。
The triangular laser measuring technique based on CCD is widely used in non-contacted measuring requirements.
重点分析了接触式测量检测规划的流程,提供了零件定位、测点自动生成等模块的解决方案。
The realization of automatic inspection planning for contact probe is discussed in detail, including part setup, point distribution, etc.
对接触式测量中杠杆机构的十字弹性支承进行了设计,并对杠杆机构的动态特性进行了分析。
The cross-spring pivot of the lever mechanism in the contact measuring system is designed, and the dynamic characteristics of the lever mechanism are studied.
研究非接触式测量系统在车辆道路实验中的应用,提出了便携式车辆运动参数综合测试系统方案。
The application of measuring system in road test of motor vehicle is studied and the scheme of portable comprehensive measuring system for motion parameters of motor vehicle is proposed.
同时测量系统中采用CCD摄像头和激光传感器相配合,实现了高效、高精度的非接触式测量方案。
At the same time CCD pickup camera and laser sensor are combined to meet the high efficiency and high accurateness requirements of this non-contact measure.
这使得许多不能在被测物上附加传感器的测量成为可能,且更客观和直观,是接触式测量无法比拟的。
This enables many in to measure in the thing attaches the sensor the survey into possibly, also is more objective and is direct-viewing, is the contact survey is unable to compare.
针对传统接触式测量方法的局限,本文提出一种基于IMAQ实现工件尺寸非接触在线实时测量的方法。
Due to the limitation of the contact measurement, a non-contact measure work-piece dimension of method was put forward, which is based on IMAQ.
作为逆向工程中形状表面数字化应用最广泛的方式,非接触式激光测量具有接触式测量无可比拟的优势。
With incomparable advantage, the non-contact laser measurement becomes the most widely used method for data collection in reverse engineering.
动压测量技术是一种非接触式测量方法,是冻干过程所特有的测量方法,具有其它测量方法所无法比拟的优点。
The technique of dynamic pressure rise measurement is a non-contacting measure method which is only belong to freeze-dry and it has more unexampled merits that others do.
动压测量技术是一种非接触式测量方法,是冻干过程所特有的测量方法,具有其它测量方法所无法比拟的优点。
The technique of dynamic pressure rise measurement is a non-contacting measure method which is only belong to freeze-dry and it has more unexampled merits that others doesn't have.
系统突破传统的位置测量模式,成功的将图像处理技术引入到自动控制系统中来,实现了位置信号的非接触式测量。
The image processing technology is used in the automatic control system to realize the non-touching measurement of position signal instead of the traditional position measure methods.
分析现有几种凸轮升程误差测量方法的优、缺点后,提出一种基于图像处理的凸轮升程误差的非接触式测量新方法。
After analysing the advantages and disadvantages of the measuring methods for the raising error of the CAM curves in existence, this article puts forward a new non-contact measuring method.
它们都是接触式测量,不可避免的会产生相当大的接触式测量误差,从而影响油气田开发上一些重要参数的精确定位。
They are contact measurement, which must produce a large error caused by the contact measurement, so may affect the exact position of some important parameters in the oil and gas field development.
介绍了一种用常规的自然热电偶和标准热电偶方法实现高速加工过程中切削温度的直接接触式测量的计算机辅助测温系统。
A computer aided measurement system is used to measure the cutting temperature directly in high-speed machining by natural thermocouples and standard thermocouples.
其中前三个参数采用接触式测量,用无线数据传输模块实现了信号的无线传输;钻杆转速采用霍尔元件实现非接触式测量。
Then, some CAN bus sensors are designed based on this structure model to measure and transmit the several important parameters in the course of well drilling.
其中前三个参数采用接触式测量,用无线数据传输模块实现了信号的无线传输;钻杆转速采用霍尔元件实现非接触式测量。
Then, some CAN bus sensors are designed based on this structure model to measure and transmit the several important parameters in the course of well drilling.
应用推荐