因此，接触导线高度测量具有重大的意义。
Therefore, the height measurement of contact wire is significant.
接触导线与一方的钕磁铁，将导致它的自旋。
Contact of the wire with the side of the Neodymium Magnet will cause it to spin.
从电接触的角度来看，铜基合金被用于接触导线和受电弓滑板的制造。
From the viewpoint of electric contact, copper base alloys have been applied to contact wires and also to pantograph sliders.
通过各种铜合金的特性分析，提出高速电气化铁路接触导线的材料选用。
This paper presents the characteristics of various kinds of copper alloy and material selection for contact wire for high speed electrified railways.
针对这种情况，研究高效、实时的电力接触导线测高仪就成为一个迫切的课题。
In view of this situation, the research of efficient and real-time height measurement of contact wire is very urgent.
为了准确反映电力机车的负载电流或短路电流，应将接触导线和正馈线上的电流互感器次边差接。
In order to measure accurately the load of electric locomotives and short circuit current, the secondary side of CTs connected with catenary and feeder should be connected in differential mode.
分析结果表明，接触导线线质、张力和刚度以及列车运行速度、波动传播速度和抬升力是影响导线疲劳可靠性的主要因素。
Analyses results show that the materials, tension and rigidity of wires, speed of trains, wave speed, and lift forces are primary factors that affect fatigue life of contact wires.
直流车辆用文中所述的蓄能器能在显著降低功率消耗的同时，又在节能方面迈出了重要一步，而且车辆可在局部无接触导线区运行。
The proposed energy storage on board of a DC-Railway vehicle leads to a big step in the reduction of consumed energy, whiledrastically reducing the peak power demand at the same time.
当你使这两条导线一接触，这台机器就会立刻开始运转。
When you contact these two wires, the machine will start at once.
文中对几种导线的技术性能作了比较，最后还指出了钢铝接触线的运用前景。
The author compares the technological performances of different wires and points out the application prospect of the steel-core aluminum contact wires.
在购买的时候，用户必须检查钨钢件导线板的尺寸和线槽的精度、光洁度，特别是和线轮接触的圆弧部分的圆度。
At the time of purchase, the user must check the slot size and a wire board tungsten steel precision, smoothness, especially with the line wheel and the arc part of roundness.
检查触靴是否转动灵活，与导线的接触是否良好，否则应进行调整。
Inspect whether contact slipper turns flexibly, whether the contact with conductive wire is good, otherwise it is necessary to adjust.
多股导线在其承受接触压力之处，不应使用钎焊将其焊在一起，除非由弹簧接线端子提供接触压力。
Stranded conductors shall not be consolidated by soldering where they are subjected to contact pressure, unless the contact pressure is provided by spring terminals.
电源线的导线在其承受接触压力之处，不应使用钎焊将其合股加固，接触压力由弹簧接线端子提供。
Conductors of supply cords shall not be consolidated by soldering where they are subjected to contact pressure, unless the contact pressure is provided by spring terminals.
该方法简便易行，其定位结果的精度不受击穿点电阻和测试用连接导线的电阻及其接触电阻的影响。
The method features easy operation and good location accuracy that is not affected by the resistance of breakdown spot, the resistance of the test wire and contact resistance.
在比较了以往采用的接触网导线高度检测技术后，开发出基于激光相位测距原理的接触网导线高度检测系统。
After having compared with common-used technique in contact wire height measurement, this paper describes a laser phase-detecting method to measure the height of contact wire.
第二电极位于第一电极远端的导线体上并与其间隔，设置将检测或激励提供给不同的第二心肌接触区域。
A second electrode is located on the lead body distal to, and spaced apart from, the first electrode and is arranged to provide sensing or stimulation to the distinct, second myocardial contact area.
安装方便、构思轻巧、外形美观，而且对导线具有足够大的挤压力，接触更可靠。
It is featured with convenient installation, light and handy structure, elegant appearance, has enough racking force to the conductor, with reliable contact.
第9.2节于2008年6月11日修订9.3一个通过一器件的确定的接地接触件或接地导线通路应该用电镀的或不电镀的铜或铜合金制成。
See Section 21. 9.2 revised June 11, 2008 9.3 An identified grounding contact, or grounding-conductor path through a device shall be of plated or unplated copper or copper-based alloy. Exception No.
讨论了当植入时用于检测或激励第一心肌接触区域和不同的第二心肌接触区域的导线装置和方法。
Lead assemblies and methods for sensing or stimulating a first myocardial contact area and a distinct, second myocardial contact area when implanted are discussed.
对秦沈客运专线接触网悬挂类型、线材配置、导线高度及结构高度、腕臂支持结构、接触网电分相形式、接触网支柱基础等主要技术标准进行分析、总结。
This is an analysis and generalization on hanging type, wire, lead elevation, structure rise, arm stay, phase splitting pattern, OCL post foundation of Qin-Shen Passenger Dedicated line OCL.
介绍一种对CCD固态传感器测量接触网导线磨耗视频模拟信号的高精度处理方法，建立了测量目标边界的判据。
A high precision processing method for the CCD video signal of the catenary wire wear measurement is presented in the paper and a criterion for measuring target border has been set up.
本文提出一种接触网导线工厂化超拉的工作模型，可以作为现场超拉工作模型的替代方案，应用在接触网工程等架空输电线路的施工中。
Proposes a working model of OCS wire overloading in factory, which may be applied in the construction of overhead electric line instead of the working model in field.
因此，它可以通过内连接管和外连接管大大增加连接器与被连接导线间的接触面，降低接触面电阻。
Therefore, a connector and a contact surface between the connected guide wires are added through the inner connecting pipe and the outer connecting pipe to lower the resistance of the contact surface.
在距离钢筋出料口一定距离的延长线上设有一个接触式行程开关，行程开关与离合器电磁铁之间连接有导线。
An extension line with a certain distance to the steel bar discharge hole is provided with a contact travel switch. A wire is connected between the travel switch and a clutch electromagnet.
压线螺钉的底部为特制的球形压线时不仅不伤导线，而且对导线具有足够大的挤压力，接触更可靠。
The bottom of crimping screw is spherical shape, which takes no damage over the conductor when crimping, and even brings big enough extrusion force over the conductor and have more reliable contact.
连接便捷，无需导线过渡，高接触截面，宽范围线径。
Convenient connection, without the conductor for transition, high-contact section, wide range of wire diameters.
本文采用两种实验方法对比测量可知通常的导线连接其接触点的电阻，并由此进行分析，阐述在双电桥测量低电阻实验中四端扭接法的必要性。
Henceforth, the article analyzes the necessity of the mode of the 4-terminal connection in the experiment of low resistance measurement using the double bridge.
本文采用两种实验方法对比测量可知通常的导线连接其接触点的电阻，并由此进行分析，阐述在双电桥测量低电阻实验中四端扭接法的必要性。
Henceforth, the article analyzes the necessity of the mode of the 4-terminal connection in the experiment of low resistance measurement using the double bridge.
应用推荐