该方法不受接线方式和初始条件的影响。
The proposed method is independent of wiring pattern and initial conditions.
三相电容器的接线方式采用三角形连接或者星形连接。
The wire connection method of the three-phase capacitor adopts triangle connection method or star connection method.
本文报道了三种电极片接线方式对贮氢合金的电化学性能的影响。
The effects of three connection methods of electrode slices on the electrochemical properties of hydrogen storage alloys are reported.
通过几种典型接线方式下的应用实例验证了该逻辑策略的有效性。
Application examples of some typical primary system connection modes prove the validity of the proposed strategy.
文章根据负荷矩与电压损失的关系分析了接线方式对电压质量的影响。
The effect of the wiring ways on voltage quality is analyzed according to the relations between load moment and voltage loss.
当采用两相电流差接线方式时，保护范围与短路类型和短路相别有关。
The protect range is relational to short circuit type and phase when phase differential current connection mode is adopted.
从理论上对变电站干扰的产生及防治措施进行了分析，并提出了具体的接线方式。
Therefore, in this paper, the causes of interference to substation and the corresponding measures are analyzed and a detailed wiring mode is proposed.
包括产品的主要组成部件，操作方式，安装方式，接线方式等，还包括以下内容。
Including main parts of the product, means of operation, installation and wiring, and etc., and also the following information.
建立工程计算方框图后，采用最小路集法，得出各种主接线方式的可靠性计算结果。
After establishing calculating pane diagrams we can get the reliability results of all the main electric connections by minimal path set method.
介绍了一种高可靠性的适合带重要负荷的电气主接线方式以及该主接线的备自投方案。
This paper is for introducing a main connection scheme and auto-switch manner of its back-up power source, which is with high reliability and suitable for feeding power to important loads.
在大多数情况下，这种认知接线方式可以帮助我们：它使我们能在随机嘈杂背景下挑选出重要信息。
In most situations, this cognitive wiring helps us: it enables us to pick important information out of a background of random noise.
现有的智能遥控开关是三线制接线方式，开关需要同时接火线，零线，灯线才能工作。
The existing three-lane system is the smart remote control switches wiring, switches and the need to live, zero line, light line can work.
以单母线分段接线方式为例，对本文提出的地区配电网络建模和拓扑分析方法进行验证；
A case of single bus with subsection connection is provided as an example which verifies the method in this paper;
同时提出了一种能够满足要求的新的接线方式，并对此接线方式进行详细的分析和讨论。
Meanwhile, a way to meet the requirements of the new wiring and wiring this way for a detailed analysis and discussion...
主接线方式变更后，要关注运行方式的变化，重新考虑母差的保护范围，修编倒闸操作规程。
By the reform of the main bus connection, we should pay attention to the change of operation mode, reconsider the bus protection scope, and edit the operation rules.
另外又提出了MCR的一种新的结构—三相六柱mcr，并分析了其磁通分布和优化接线方式。
In addition, a new structure of MCR - Three phrase hexastyle MCR. It's magnetic flow distribution is analysed and mode of connection is optimized.
再通过参数的测量、相量图的分析，确定错误所在，最后写出在错误接线方式下的功率表达式。
Then, through the measuring of parameter, the analysis of phasor diagram, to confirm the mistake, and finally get the power expression under the false connection way.
在行波母线保护的基本原理和动作判据的基础上，给出了对应一个半开关接线方式的原理方案。
The principle scheme aimed at one and a half circuit breaker model is presented based on basic principle and criterion of bus-bar protection.
本文提出了一个能计算目前所见到的各种绕组接线方式的电容电动机性能的单相电机统一模型。
This paper develops a generalized model of single-phase capacitor motor. The model can represent all kinds of connected capacitor motor and can be used to calculate their performances.
为利于故障点灭弧，提高单相重合闸的成功率，一般采用并联电抗器加中性点电抗器的接线方式。
The connection of shunt reactor and neutral reactor is normally used to extinguish arc and to ensure success of autoreclosure.
根据传统电流速断保护的原理，得到了不同电流保护接线方式下，传统电流速断保护的保护范围。
The protection range of traditional fast tripping current in different connection modes can be decided according to the fast tripping current protection theory.
为此，介绍了附加柴油发电机的接线方式、供电模式、试验方法和马达控制中心的供电接线方式等。
In this paper, the wiring procedures, power supply mode, testing methods and the power supply and connection schemes of motor control center are described.
断路器型号、级数、脱扣器额定电流、周围空气参考温度、接线方式、附件种类和附件额定工作电压。
Type of circuit Breaker, pole number, rated current of tripping device, reference temperature of ambient air mode of connection, kind of accessories and their working voltage ratings.
介绍了南水北调中线京石段应急供水工程各类闸站负荷等级、主接线方式、供电保证概率分析计算等。
The relationship between water supply assurance factor and the quantity of sanitary fittings operated simultaneously which is used to determine the design flow rate is analyzed.
在评价系统数据建立的基础上，利用可靠性计算中的最小路法对各种主接线方式的可靠性进行计算和分析。
On the base of assessment system data, we can calculate and analyze the reliability of all the main electric connection schemes by minimal path set method.
本文通过对这两种压接线方式的比较分析，指出板式压接线方法的一些弊端，并推荐选择筒式结构的接线方法。
By analysis and comparison between the two methods, some shortcomings of plate pressure connection method are shown and the connection method of sleeve structure is recommended.
仿真结果表明，该补偿方法对于不同接线方式的不平衡负荷都具有较好的补偿效果，证明了理论推导的正确性。
The simulative results show the compensation effectiveness on the unbalanced load with different connection, which verifies the correctness of theoretical deduction.
简述了EPS应急电源的工作原理，探讨了它的适用领域，给出了EPS应急电源常见的接线方式和容量选择方法。
The principle of Emergency Power Supply system is presented, its field of practical application and the connection method of normal circuit and the capacity choice of EPS are discussed in this paper.
将DSP应用于电容器保护装置，实现各项保护功能，运行人员可依据电容器的实际运行接线方式，方便的选择投退。
Using the DSP chip as controlling unit in the capacitor protection device to achieve various functions, the user can cast or cancel one function according to the practical connections of capacitors.
同时对城市输电网、配电网的多种接线方式进行了分析比较，并提出了对于城市高负荷密度地区电网的优化接线方式。
This paper also analysis kinds of ways of connection for the transmission and distribution, and present the optimized planning for the high density load area.
应用推荐