并介绍聚丙烯接枝物的应用情况。
The application of the graft polymer of pp is also introduced.
其接枝物作为热熔胶的基础聚合物。
The grafted copolymer used as main polymer of hot melt adhesive is studied.
用接触角技术测定了接枝物的表面性能。
The surface property of grafted copolymer was measured by contact angleagainst wa…
综述了聚丙烯固相接枝物的应用研究进展。
Research on the application of polypropylene solid phase graft copolymer was reviewed.
又制备了接枝物钠盐。
用红外光谱和扫描电镜对接枝物结构进行表征;
The graft copolymer structure was characterized by infrared spectrum and SEM.
结果表明:实验获得的接枝物润湿性能明显改善。
The results of experiment show that the grafting products' hydrophilicity is improved.
展望了聚丙烯接枝物及增容PP/PA塑料合金的应用前景。
Then it discusses the developing trends and potential application of grafting PP and compatibilized PP/PA plastics-alloy.
等温结晶动力学的研究表明接枝物结晶的成核方式不发生改变。
The isothermal crystallization kinetics indicate that the graft group can accellerate the crystallization rate of PP, and doesn't …
接枝物的结晶峰温、熔融峰温、结晶度及结晶速度均低于纯pp。
The crystallization peaks, melt temperatures, crystallinity and crystallization rates of the grafted PP are lower compared to pure PP.
最后,通过红外光谱仪、差示扫描量热仪,对接枝物结构进行表征。
Structural Characterization of graft polymer was performed by Infrared spectrograph and differential scanning calorimeter.
通过制备的接枝物添加到阻燃体系中,考察了接枝率对体系性能的影响。
The effects of grafting ratio on mechanical property of the system are studied by adding the produced compatilizer to the LDPE/MH system.
目的考察阳离子型壳寡糖硬脂酸接枝物纳米粒的理化性质及其体外释放行为。
OBJECTIVE To investigate characterization and release profiles of chitosan oligosaccharide grafted stearic acid (CSO-SA) nanoparticles in vitro.
研究了引发剂种类及用量对接枝率和接枝物熔体流动速率(MFR)的影响。
The influences of different initiators and their concentrations on grafting ratio and the melt flow rate (MFR ) of the grafted polymer were studied.
采用单体自增溶原位固相接枝法合成了聚乙烯与三单体固相接枝物(PETM)。
The ternary-monomer graft copolymers of polyethylene(PETM) was synthesized by the monomer self-dissolved in-situ solid phase graft copolymerization.
利用所接枝物制备皮革填充计,填充效果表明,本填充剂改善了成苯多方面的性能。
On the other, the fillers from this grafting product were prepared to leather. The filling effects were then showed that a number of properties of resultant leather are improved.
此外,还利用红外技术定性定量表征了接枝物,并用扫描电镜观察了接枝物的形态。
Further more, qualitative and quantitative IR analysis and morphology of the graft copolymer were showen.
用化学滴定法测定了接枝物的接枝率,考察了接枝率与单体,引发剂和时间的关系。
The grafting ratio of each sample was accurately measured by titration. The relationships between grafting ratios and monomer, initiator, and time were investigated.
利用所接枝物制备皮革填充计,填充效果表明,本填充剂改善了成苯多方面的性能。
On the other, the fillers from this grafting product were prepared to leather. The filling effects were then showed that a number of properties of…
采用紫外辐照技术制备了聚乙烯-马来酸酐接枝物,并用红外光谱对接枝物进行了表征。
The effects of UV irradiation time, monomer (MAH) and initiator (BP) concentration on grafting rate and gel content of grafted polyethenes were studied.
结果表明,采用PP(F40 1)、高接枝率接枝物和模压工艺可获得较好的插层效果。
The results indicated that excellent intercalation effect can be obtained by using PP(F401), high grafting rate PPMA and mould process.
利用TEM对PB-g-PS乳胶粒子进行了形态观察,接枝物为球形粒子,且具有核壳结构。
The study showed that PB-gPS latex particle is ball-like, and has a core-shell shaped structure.
以氯化聚乙烯接枝马来酸酐的接枝物为基料,制得性能优良,使用方便的聚丙烯发泡材料用粘合剂。
The convenient adhesive with good properties for polypropylene foam material was prepared here, based on graft polymer from chlorinated polyethylene and maleic anhydride.
研究了接枝单体MAH、引发剂过氧化二异丙苯(dcp)和抗氧剂1010用量对接枝物酸值的影响。
The influences of grafting monomer MAH, initiator DCP and the amount of antioxidant 1010 on acid number were studied.
考察了共混比、不饱和极性单体、PP熔体挤出接枝物、增塑剂及EPDM用量对共混物力学性能的影响。
The influences of blending ratios, EPDM's quantity, PP melt - extruded grafting copolymers, unsaturated polar monomers and plasticizer on the mechanical properties of the blends were investigated.
测定了接枝物的分子量,计算了接枝物的结构单元数,认为每个氯化聚丙烯链上接上的马来酸酐基团个数在30~67之间;
Construction unit number was calculated by determining molecular weight. About 30-67 MAH units are grafted to a CPP chain.
通过熔融共混制备了POE及其马来酸酐接枝物增韧PTT 共混物,研究了增韧PTT共混物的结晶性能、力学性能和形态。
PTT blend toughened by POE and POE-g-MAH were prepared by melting blending, and the morphology, crystallization properties and mechanical properties were studied.
接枝物极性的增加的趋势依次按接枝单体马来酸酐(MAH)、甲基丙烯酸甲酯(MMA)、甲基丙烯酸缩水甘油酯(GMA)递增。
The increasing order of the polarity of the grafted PP was as this sequence: MAH, MMA and GMA, which showed the ef.
聚丙烯凝胶电泳(SDS - PAGE)分析结果表明,随着接枝度(DG)的增加,接枝物的亚基谱带逐渐减少,糖基谱带变得明显。
According to the analysis of SDS-PAGE, the bands of the graft subunits decreased and the glycosyl bands were seen more clearly with the degree of graft (DG) increasing.
接枝苏氨酸化合物可以吸附铜铁钙三种金属离子。
Threonine grafted compound could adsorb cuprum, iron and calcium.
应用推荐