结果表明，采用预辐射接枝技术可制得接枝率55%以上的高接枝率抗菌纤维素纤维。
The results showed that the antibacterial cellulose fibers with a percentage of grafting above 55% were obtained by the pre-irradiation grafting method.
对接枝技术在聚合物分离膜的制备、改性、功能化和高性能化等领域的应用进行了总结。
The latest advances of the application of grafting on the modification, preparation and high performance procedure of polymer membrane were reviewed.
PP固相接枝技术在PP复合材料与共混合金中具有良好的使用效果和广阔的应用前景。
The technology of solid phase graft of pp was applied perfectly and further exhibited an extensive application prospect in preparation of composites and blending alloys of pp.
介绍了化学、等离子体、辐射和光化学等应用于聚合物分离膜领域的接枝技术的主要特点。
The grafting techniques applied in polymer membrane such as chemical, plasma, radiation and photochemical methods were introduced.
文章叙述了利用辐射接枝技术，缩合共价法，使葡萄糖氧化酶固定在聚乙烯、氟46膜上。
The paper is described the immobilization of GOD on polyethylene and F_ (46) by radiation grafting and condensation covalent.
本文采用等离子体和紫外照射接枝技术对医用高分子材料聚乙烯进行表面改性，以提高其抗凝血性能。
This paper is related to surface modification of PE films by combining plasma pretreatment with UV-induced graft polymerization, in order to improve the antithrombogenicity of polyethylene (PE) films.
利用反应性挤出技术，在熔融状态下BPO能有效地引发HBS木质素与苯乙烯的接枝共聚。
HBS lignin can be effectively copolymerized with styrene initiated with BPO in molten state by reactive extrusion technology.
还评价了其它技术性能，如回弹性和压缩永久变形，发现接枝硫化胶优于添加3 - 5份油增塑的NR硫化胶。
Other technical properties such as resilience and compression set have also been evaluated and are found to be better than 3-5 PHR oil plasticized NR vulcanizates.
运用等离子体技术改变高分子材料的表面性质的方法主要有三类：等离子体处理、等离子体聚合和等离子体接枝聚合。
There are three ways using plasma technology to modify the surface properties of polymer materials, which are plasma surface treatment, plasma polymerization and plasma graft copolymerization.
用正电子湮没技术研究在聚四氟乙烯辐照接枝过程中的自由体积与正电子湮没寿命谱的关系。
The positron annihilation technique was applied to study the relation between relative free volume and irradiated graft for PTFE.
综合叙述了接枝abs粉料和AS珠粒料树脂掺混生产abs树脂技术。
This paper describes comprehensively the technology of ABS resin production by blending graft ABS powder and AS pearl pellets.
利用反应挤出技术和红外光谱分析方法，对马来酸酐(MAH)接枝聚丙烯(PP)的制备工艺进行了研究。
The preparation process of maleic anhydride grafted polypropylene (PPg-MAH) was studied by reactive extrusion using a twin screw extruder system and infrared spectroscopy.
利用辐射接枝改性技术，制备了医用硅橡胶水凝胶膜。
Grafting hydrogels onto silicone rubber membranes were prepared by radiation technique for medical application.
高分子材料的表面接枝改性是工程技术领域和生物医学领域的重要课题之一。
Polymer surface grafting modification is of prime importance in polymer applications from the viewpoint of both academies and industries.
实验结果表明，将接枝、增强、增韧技术共用，可以获得高性能玻纤增强聚丙烯工程塑料。
The experimental results showed that using the methods of grafting, reinforcing, toughening together could produce high performance GRFPP.
采用紫外辐照技术制备了聚乙烯-马来酸酐接枝物，并用红外光谱对接枝物进行了表征。
The effects of UV irradiation time, monomer (MAH) and initiator (BP) concentration on grafting rate and gel content of grafted polyethenes were studied.
综述了国内聚乙烯接枝改性和交联改性技术的最新进展。
The recent progresses in modification of polyethylene by grafting and cross - linking were reviewed in this paper.
本文提出通过超临界CO_2流体技术对基体膜进行接枝改性，改善基体膜表面亲水性及抗污染性能。
In this paper, the surface graft polymerization of porous membrane in supercritical carbon dioxide (SC CO_2) was proposed to improve the hydrophilic and antifouling properties.
为了便于确定真丝绸预辐照接枝的工艺参数，采用电子自旋共振技术对这些问题进行分析。
Such problem as to determine the pre-irradiation grafting process parameters is analyzed with Electron-Spin Resonance (ESR).
肽树枝状化合物是一类含有肽键或表面接枝肽的树枝状化合物，在生物技术及生物化学领域具有广泛的应用。
Peptide dendrimer is a kind of dendrimer that contain peptidyl bond or is grafted with peptide on the surface. It has been widely used in biotechnology and biochemistry.
综述了普通自由基聚合和原子转移自由基聚合（ATRP）反应对壳聚糖及其衍生物进行修饰改性的研究现状。着重介绍了ATRP技术在壳聚糖接枝改性方面的应用。
The paper reviewed the modification of chitosan by free radical polymerization and atom transfer radical polymerization(ATRP), emphasized the application of ATRP on graft copolymerization of chitosan.
聚丙烯固相法接枝不饱和单体是一种简便易行的本体法技术。
Solid phase graft copolymerization of unsaturated monomers on PP is a simple and convenient bulk technique.
系统简介了聚丙烯熔融接枝体系的组成、机理及实现熔融接枝的反应挤出技术。
Melt grafting modification of polypropylene were introduced in this paper, including its formation, mechanism and reactive extrusion to achieve melt grafting.
本发明属于无机材料技术领域，具体为一种固体酸催化剂-聚对苯乙烯磺酸接枝改性碳纳米管的制备方法。
The invention belongs to the field of inorganic materials technology, specifically as a solid acid catalyst - grafted poly styrene sulfonic acid preparation method of carbon nanotubes.
此外，还利用红外技术定性定量表征了接枝物，并用扫描电镜观察了接枝物的形态。
Further more, qualitative and quantitative IR analysis and morphology of the graft copolymer were showen.
用接触角技术测定了接枝物的表面性能。
The surface property of grafted copolymer was measured by contact angleagainst wa…
用接触角技术测定了接枝物的表面性能。
The surface property of grafted copolymer was measured by contact angleagainst wa…
应用推荐