本文主要介绍液压胀接管子-管板接头设计的一种理论计算方法。
This paper describes mainly a theoretical calculating method of the hydraulically expanded tube-to -tubesheet joints design.
铰接接头设计用于抵抗高压冲刷、防止过大的电缆应力和机械磨损。
They are designed to protect against high pressure washing, excessive cable strain and mechanical abrasion.
HK系列接头设计用于一般用途的液压服务（静止的和流动的石油和燃气）。
The HK Series is designed for general purpose hydraulic service in stationary and mobile Oil & Gas applications.
然后，分别阐述了目前正应用于冲击活塞和接头设计的两种直接反演设计方法。
Then, two direct inverse design methods which are currently being applied to design the impact junctions are demonstrated respectively.
本文简略叙述复合材料胶接的接头破坏形式，接头力学分析，接头设计及测试方法。
The failure form of joint, mechanical analysis of joint, joint design and test methods of adhesive bonding of composites are presented briefly in this paper.
安全可靠：接头设计时，考虑到上碗扣螺旋摩擦力和自重力作用，使接头具有可靠的自锁能力。
Safe and reliable: joint design, taking into account the friction on the screw and self Bowl gravity, so that a reliable self-locking joint capabilities.
角刚度(又称弹性比力矩)及弹性件在最大摆角下的剪切应变是固体发动机柔性接头设计的重要指标。
Angular stiffness and elastomer shear strain on maximum swinging Angle are important indexes in flexible joint design of solid rocket motor.
在分析研究了国外各种电接头设计的基础上，根据电接头工作状态和环境，重新设计出一种新型电接头。
Based on analyzing various overseas designs of electrical connectors and their working conditions, the author redesigns a new type electrical connector.
介绍复合材料承力接头设计的相关理论及应用状况，包括设计基础、结构形式、强度分析、相关试验等。
The related theory and application of bearing - load composite joints are briefly reviewed, including design basis. structure. strength analysis. related testing and so on.
并从钢材选材、结构接头设计、加工及焊接工艺措施等方面提出了防止钢结构厚板层状撕裂的技术措施。
Then some measures for preventing lamellar tearing were proposed from the aspects of steel material selection, joint detail design, fabrication and welding process.
塑料管道系统。玻璃纤维增强式热固性塑料元件。检验带有弹性密封件的刚性锁定管座套筒接头设计的试验方法。
Plastics piping systems. glass - reinforced thermosetting plastics components. test methods to prove the design of rigid locked socket - and - spigot joints with elastomeric seals.
在直流XLPE电缆接头的设计中，界面空间电荷的抑制是接头设计成功的保证；而对界面空间电荷的抑制就需要界面两侧绝缘的介电常数和电导率的合理配合。
In designing DC XLPE joints, the suppression of interfacial space charge is the most important, which depends on the reasonable permittivity and conductivity coordination of the two insulations.
Michael告诉他们，他们将会在“圣路易斯市”接头，根据设计图，就是一个旧的贮藏室，底下就是他们逃跑需要经过的蒸汽管道。
Michael tells them that they're going to meet in "St. Louis," which according to the blueprints is an old storage building that rests right on top of the steam pipes they plan to use in their escape.
介绍了一种应用于钢管焊接接头检验的射线透视系统的设计原理与实现方法。
The design principle and realization method of a new kind of radiographic welding seam inspection system for steel tube were introduced.
整机控制电路全部采用航空快速接头插接式设计，方便快捷。
The machine control circuit use all air quick coupling plug design, convenient and quick.
为了进一步提高接头的密封能力，设计了一种斜面台肩结构来改善钻杆接头的密封性能，与api结构相比有效的提高了密封性能。
A structure of incline plane shoulder has been designed to improve the sealing performance of the joint and it improved the sealing ability effectively compared with the API joint.
提出考虑焊接接头疲劳损伤约束的焊接结构抗疲劳优化设计方法。
Optimization design method of welded structure was put forward with welded joint fatigue damage as constraints.
此外，我公司还承接各种特殊连接形式，非标准旋转接头和金属软管及不锈钢法兰的设计、制造。
In addition, I also take the form of a variety of special connections, non-standard rotary joints and metal hoses and stainless steel flange design, manufacture.
塑料管道系统。玻璃纤维增强式热固性塑料元件。检验栓接式法兰接头的设计试验方法。
Plastics piping systems. Glass - reinforced thermosetting plastics components. Test methods to prove the design of bolted flange joints.
介绍了橡胶密封条模压接头模具的设计方法及应注意的事项。
The paper introduced the method of mold designing for molding joints of sealing strips and matters needing attention.
详细介绍了PCCP限制性管段止推设计和铠装接头水压试验的情况。
This paper introduces in detail the thrust design and armored joint hydraulic test for PCCP restricted tubulation.
本文阐述了一种新的两芯多模光纤旋转接头的设计原理及实验结果。
This paper describes the structure designing and the experiment result of a new duplex multi mode fiber rotary joint.
本文主要介绍了该新型回转引风接头的设计方法，并进行了橡胶弹簧的加工工艺和刚度试验。
The article mainly describes the designing method for the new type air-induced revolving joint and introduces the processing technology and rigidity tests of rubber spring.
分析结果对灌装系统中的斜T型管接头的优化设计及使用维护，有一定的指导作用。
The analysis results can be guidance for the optimization design and maintenance of inclined T-tube joint.
推导出气瓶圆筒段、封头、接头和内衬的设计计算公式。
Calculating formulae for design of cylinder, dome, joint and liner of natural gas cylinder are derived.
研制宽频带的吉赫横电磁波传输室，其高频输入接头的设计尤为关键。
The design of high frequency input connector is especially important for the development of wide band gigahertz TEM cell (GTEM cell).
胶接工艺中，胶接接头的设计是一重要的环节。
In the glue processing, the design of the gluing joint is prerequisite and important.
位于传输煤炭粉尘的风管的伸缩接头(膨胀节)的设计应当能够承受排气爆炸。
Expansion joints located in ducts conveying coal dust shall be designed to withstand a vented explosion.
详细介绍了凸焊密封螺母接头的设计和工艺试验情况。
The status of design and technological experiment of projection welding seal nut joint is introduced in detail.
伸缩缝处立柱接头有芯柱连接上下柱，通常设计为可活动的接头。
Expansion joints in the column joints have core column connection column from top to bottom, usually designed to be movable joints.
应用推荐