市场上有一些专用PCI接口芯片。
你需要一个软件开发中心和汽车调频接收机接口芯片？
Do you developing automotive software and need an interfaces for FM receiver chip?
采用中断二维直读键盘结构，与并行接口芯片8255A接口；
The keyboard was connected to parallel interface chip 8255A, with the interruptive intercross structure.
本文介绍了一种新型的智能网络接口芯片PS2000及其应用。
This paper introduces a new intelligent network interface chip PS2000 and its application.
介绍利用AT 89 C51单片机，作为可编程接口芯片的使用方法。
This paper introduces the way of using AT89C51 single chip computer as programmable interface chip.
MDIO接口模块为以太网接口芯片中MAC层对PHY器件的控制管理接口。
MDIO interface module block is an interface that is used in MAC level to control and manage PHY devices.
实验表明，这种接口芯片操作简单、体积小、功耗低、可靠性高，极具实用价值。
The application result shows that the interface chip is of practical use because it has the characteristics of easy operation, small volume, low power consumption and high reliability.
采用TLC320AC01音频级模拟接口芯片实现了DSP与模拟信号的接口。
TLC320AC01 is used to realize the interface of DSP and analog signals.
介绍DSP芯片如何桥接到PCI总线，并选择利用专用接口芯片的方法来实现。
Introduces how to connect the DSP to PCI Bus in brief and choose the means of using special PCI Bus interface chip to achieve it.
介绍了一种有目标识别功能的图像采集系统，用usb接口芯片实现了数据的传输。
The image sampling system that has target recognition function is described. The data is transferred by the USB interface chips.
系统软件设计：包括PCI驱动的开发，接口芯片的初始化设计；dsp的软件设计。
System software designs: embracing the PCI driver, initialization the interface chip and the software of DSP.
自启动预载接口芯片以控制为主，时钟关系复杂。时序设计是整个设计的重点和难点。
Interface and download chip is control-oriented and has complex clock relationships, therefore timing design is the key and difficult point.
本文物理层接口电路是USB2.0接口芯片中的最关键的高速模拟与混合信号电路。
The transceiver interface circuit in this dissertation is the most important part of USB2.0 interface which is a high speed mixed signal circuit.
本文结果表明采用DSP芯片与网络接口芯片相结合的方案能够实现嵌入式系统网络接入。
This result indicates the scheme that combines chip DSP with interface chip of network can realize embedded systematic network accessing.
SPC 3是一种用于PROFIBUS - DP开放式工业现场总线智能化接口芯片。
SPC3 is a intelligence interface chip which is used in the open field bus PROFIBUS-DP.
该系统利用TUSB3210的USB接口芯片实现了多路脉冲治疗仪器与计算机的连接。
The connection between the computer and this instrument was realized through TUSB3210 chip.
采用自顶向下的设计方法，用原理图和VHDL语言这两种输入对串行通信接口芯片进行设计。
The serial communication interface chip design was realized by application of schematic diagram and VHDL language.
介绍了利用8098单片机和其它接口芯片，实现对数字集成电路进行测试诊断的原理和方法。
This paper introduces the principles and methods of the test and diagnosis of digital IC, using 8098 Single chip Computer and other interface Chips.
利用FPGA实现GPIB控制芯片对实现测控领域接口芯片的自主化具有一定的意义和价值。
It has a significance for independence of interface chips to achieve the GPIB controller by FPGA in the field of testing and controlling.
介绍了几种组成智能传感器的接口芯片的功能、工作原理、结构框图，以及其使用方法和应用电路。
Functions, working principle and structure frame of some interface chip for smart sensors are introduced, and its usage and applied circuit are described.
控制卡通过单片机对USB通信接口芯片的控制，实现PC计算机与控制卡通过USB接口的通信。
With the USB interface chip controlled by microcontroller, the communication between the card and PC is achieved.
系统主要利用CMOS摄像机、高性能CPLD、ARM7芯片以及以太网接口芯片作为硬件平台。
This system made use of CMOS digital camera, high performance CPLD, ARM7 chip and Ethernet chip as its hardware platform.
本文介绍了一种使用USB通用总线接口芯片CH371实现USB接口的硬件设计和软件实现方法。
This thesis introduces a hardware design and software implement method of USB port using CH371 which is a USB general interface chip.
本文简要介绍了PCI协议从模式接口芯片pci9052特点，并说明了EEPROM配置注意事项。
This paper briefly introduced the feature of PCI protocol slave mode interface chip PCI9052 and illustrated the advertent items when configuring the EEPROM.
介绍了几种典型的PCI总线的接口芯片，包括它们的结构、功能、编程及其应用，并对其进行了比较。
Several typical PCI controllers are discussed, including their construction, functions, programming and applications. They are also compared in this paper.
分析了总线接口芯片选择原则和总线冲突解决方案，给出了系统实现的硬件接口电路和软件实现详细框图。
The selection principle of bus interface chip and solution of bus conflict are introduced, together with its concrete hardware circuits and software block chart are given.
通过对并行接口芯片8255A内部结构的分析和实例的验证，得出8255A地址线的接法不唯一的结论。
Through analyzing the inner structure of the parallel interface chip 8255A and some examined examples, this paper puts forward that the link of the 8255A address line is not unique.
研究并设计了符合PCI规范V2.2的接口芯片，着重阐述了它的功能特点、时序特征及其大致设计流程。
In this paper, an ASIC based on PCI Local Bus SpecificationV2.2 is designed, and its function, timing characteristic and design flow are also presented.
软件设计中采用汇编语言、C51语言编写数据采集程序和对usb接口芯片进行协议处理及数据交换的程序。
The software designs adopt assembly language, C51 language to compile data sampling program and programs on protocol processing and data transfer conducted to USB interfacing chip.
选择的通信接口芯片允许多达128个同样的接口芯片接在同一总线上，为多机通信的实现提供了极大的方便。
It allows 128 interface ICs to connect with each other on one bus, which makes it easy to use the card in multi-computer system.
应用推荐