论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
介绍了几种组成智能传感器的接口芯片的功能、工作原理、结构框图，以及其使用方法和应用电路。
Functions, working principle and structure frame of some interface chip for smart sensors are introduced, and its usage and applied circuit are described.
本文以具体的芯片、实用的接口电路为例，讨论了数字控制系统中普遍存在的数据预处理问题。
Taking concrete chips and practical interface circuits for example, this paper discusses the problems of data preprocessing that generally exist in digital control system.
对于硬件接口电路中常用的一些方法进行了简要的比较，并介绍了电平转换芯片MAX232及其应用方法。
It gives comparison among some methods which are often adopted in the interfacing circuit, and introduces a chip MAX232 of level translation and its application method in detail.
介绍了一种新型智能键盘显示控制器WH8280和基于该芯片的单片机键盘显示控制接口电路。
This paper presents a new intelligent keyboard and display controller WH8280 and a keyboard and display control interface circuit of based on this chip.
本文介绍了串行时钟芯片DS1302的功能和工作原理，并给出ds1302在灌溉控制器中与AT 89 C51单片机的接口电路设计。
This paper introduces the functions and work principles of serial clock chip DS1302, the design of interface circuit with AT89C51 single -chip microcomputer in the spray irrigation controller.
在该系统中采用MAX485芯片，设计了RS- 485接口电路。
Adopting MAX485 chip in this system, it designed RS-485 interface circuit.
该终端的硬件设计，主要包括微处理器芯片的选型、MC35通讯模块的接口设计、存储器单元及串口电路设计等。
This terminal's hardware design mainly includes the choice of microprocessor chip, the interface design of MC35 module of communication, the circuit design of memory modules and serial port and so on.
本文论述了MH89780芯片的性能原理，并设计出实用的数字中继接口电路。
In the paper, the performance principle of the MH89780 chip has been analysed, and a practical digital trunk interface circuit has been designed.
另一个是PCI总线接口电路，本设计中采用PERICOM公司的PCI桥接芯片PI7C8150B实现图像数据的传输。
The other module is PCI bus interface circuit. PI7C8150B chip of PERICOM Corporation is used to finish transmission of the image data.
其模拟用户接口电路使用MH88610芯片；
为此，提出了在单片机串口方式0的基础上增加双向传输GAL芯片，并据此设计了触摸屏接口电路及软件。
Adding two-way chip GAL on SCM serial way 0 was proposed. On the ground, the touch screen interface circuit and software were designed.
文章从芯片特点、功能、用户接口等方面对其进行了阐述，并结合具体电路介绍了它的典型应用。
The paper expounds the IC in the respect of the feature, the function, the interface with user etc, and introduces it's typical application in the specific circuit.
分析了总线接口芯片选择原则和总线冲突解决方案，给出了系统实现的硬件接口电路和软件实现详细框图。
The selection principle of bus interface chip and solution of bus conflict are introduced, together with its concrete hardware circuits and software block chart are given.
在调制驱动电路中，采用MAX3263芯片，具备标准的PECL电平接口，可以灵活地调整激光器的预置电流和调制电流，并具备自动功率控制功能。
In modulation driving circuit, with the chip MAX3263, being the function of APC, there is standard PECL level interface to modulate laser modulation current and preset current neatly.
本文利用集成接口芯片EZ - US B在硬件及软件方面进行设计开发，实现了对心电信号的采集，并对电路设计和固件设计部分进行了详细说明。
This paper USES the EZ-USB integration interface chip to develop hardware and software, realizing the collection of ECG signal, and makes a detailed account for the designs of circuit and firmware.
从站接口硬件设计以PHILIPS P 89c 668MCU芯片和SPC3芯片接口电路为核心，外加辅助接口电路构成。
The core of Slave interface hardware design regarded PHILIPS P89C668 MCU chip and SPC3 chip interface circuit as, and additional auxiliary interface circuit is formed.
介绍了TMS320C5402芯片与RTL8019AS互联网控制器的硬件接口电路的设计，实现了一个运行在TMS320C5402上的小型嵌入式TCP/IP协议栈。
The design of hardware interface between TMS320C5402 and RTL8019AS is described, implemented a minor embedded TCP/IP protocol which was running on the DSP chip is implemented.
针对数字信号处理器与其他微处理器的不同之处，文中着重介绍了等待状态发生逻辑电路及数字信号处理器与外部芯片的数据接口电路。
In view of the disparity among DSP and other microprocessors, the logic circuit in waiting requisition and the data exchanging interface among DSP and external chips is offered.
在对RFID芯片系统的相关理论和技术的深入研究的基础上，分析设计了RFID芯片的射频接口电路、数字电路和EEPROM存储电路。
Based on the deep study of relate theories and technologies of RFID chip, the paper has finished the analysis and design of the rf interface circuits, digital circuits and EEPROM circuits.
介绍了利用8098单片机和其它接口芯片，实现对数字集成电路进行测试诊断的原理和方法。
This paper introduces the principles and methods of the test and diagnosis of digital IC, using 8098 Single chip Computer and other interface Chips.
文中介绍了基于PDIU S - BD 12芯片的USB接口的硬件电路设计，并介绍了USB固件编程的实现。
In this paper, the hardware circuit design of USB interface based on PDIUSBD12 chip is introduced, meanwhile implement of USB firmware program...
因此研究开发基于PCI总线接口和通信协议的超大规模集成电路芯片是具有应用前景和市场价值的。
Therefore, it will have a bright future to develop VLSI chip based on a PCI bus and related a communication protocol.
介绍了可编程视频输入编码芯片SAA7111和可编程视频解码输出芯片SAA7185工作原理和接口电路设计。
Introduces operation principle and interface circuit design of Video Input Processor SAA7111 and Video Output Processor SAA7185.
该文在对工业以太网技术阐述的基础上，具体介绍了在80c196单片机系统中，利用RTL8019AS以太网控制芯片，实现工业以太网接口的硬件电路设计及软件设计。
Based on the introduction of industrial Ethernet technique, this paper describes a method of expanding an Ethernet interface using RTL8019AS Ethernet controller in the 80c196 single-chip system.
硬件部分以P89C61X2BA为控制核心，包括采用USBN9604接口芯片的USB接口电路，光栅尺输出信号处理电路，以XC95108为主的信号细分、辨向和计数电路等。
The hardware of the system is made up of P89C61X2BA as main processor, USBN9604 as USB interface, grating signal-processing circuit, XC95108 as signal subdivision, sensing, counter circuit and so on.
利用单片机及上述芯片设计了一个高速不连续采样的数据采集系统，给出了该采集系统的接口电路，并阐述它的实现原理。
A discontinuous data acquisition system based on microcontroller is designed. The systematic interface circuit is provided and its realization principle is explained.
本发明电路设计简单，电路的接口关系清晰明了，并且用单个fpga芯片实现采样数据形成的电路使得电路的可靠性比较高。
The present invention has simple circuit structure and clear circuit interface relationship and the sample data forming circuit with a single FPGA chip makes the present invention reliable.
通过5 G 14433芯片与MCS - 51单片机接口电路的实例说明了硬件电路的调试过程。
This article introduces the debug process of hardware circuit by the example of5G14433and MCS-51SCM interface circuit.
文中对变频部分的主电路、智能功率模块IPM和dsp芯片及其周围接口电路都作了详细地介绍。
This paper detailedly introduces the master circuit of the frequency transformation speed regulation, IPM, and interface circuit with DSP.
应用推荐