转换过程和数据采集过程通过CS和串行时钟信号进行控制，从而为器件与微处理器或DSP轻松接口创造了条件。
The conversion process and data acquisition are controlled using CS and the serial clock signal, allowing the device to easily interface with microprocessors or DSPs.
课题采用嵌入式微处理器负责控制整个通信板卡系统，从而将接口处理速度有效的提高了。
This topic use the embedded microprocessor to be responsible to control the entire communication card system, thus processing speed is effectively enhanced.
硬件设计方面采用DSP芯片TMS320F206为核心处理器，建立起基本的采样、控制、通信和人机接口硬件平台。
With regards to the hardware design, a DSP chip TMS320F206 is adopted as CPU, and builds a hardware platform of sample, control, communication and human interface.
对于多款微处理器本身没有USB的控制器，为了在嵌入式系统中使用USB设备，需要自行扩展usb接口。
When some microprocessors working with USB equipments in embedded systems without their own USB controller, their USB interface must be expanded.
该器件具有一个高速并行接口，可轻松与微处理器、微控制器和数字信号处理器进行接口。
The part offers a high speed parallel interface for easy connection to microprocessors, microcontrollers, and digital signal processors.
网络刻录系统的嵌入式处理器选择了三星的ARM处理器，并使用CPLD芯片来控制网络和IDE等接口。
The hardware is based on the Samsung's ARM microprocessor. A CPLD chip is used to control the interface of the network and IDE.
介绍了一种网络化的多功能电能表。其硬件主要包括80c196 KC处理器、PSD913F 2闪存和RTL80 19as网络接口控制芯片等。
A kind of network multi functional electric energy meter is introduced, which is composed of 80c196kc microprocessor, PSD913F2 flash memory and RTL8019AS net interface controller.
转换过程和数据采集过程通过CS和串行时钟进行控制，从而为器件与微处理器或DSP接口创造了条件。
The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs.
HD 61830是一种图形液晶显示控制器，可与8位微处理器直接接口，管理64K显示RAM。
HD61830 is a graphic LCD controller which directly interfaces to 8-bit micro-chip, managing 64k display RAM.
硬件部分重点论述了S3C 2410处理器与存储器和网络控制器芯片的接口设计问题。
In hardware design part, explains especially the interface of S3C2410 CPU chip with memory and network controller chip.
通过该方法的介绍，使得那些没有SPI接口功能的处理器和控制器能够扩展SPI接口，以便同外部设备进行数据交换。
This interface can be used to data exchange with peripheral apparatus for processor and controller which have not SPI interface function.
接口电路又包括与主控制器的PCI接口，与A/D转换器的接口和与协处理器的接口（HPI）。
The interface circuits include the PCI interface of the master controller, the interface of A/D converter and interface (HPI ) of the association processor.
斯潘软件工程师提供完善的设施，最先进的微处理器为基础的控制和计算机接口，我们的产品和系统。
Spang software engineers provide state-of-the-art microprocessor-based controls and computer interface to our products and our systems.
一般来说，对于RGB总线接口的数字屏都需要有控制器才能正常显示，但是本文利用STM 32处理器设计出了一种能直接挂载rgb接口数字屏的方法。
Generally speaking, the figures for RGB bus interface screen needs a controller to display properly, but this paper USES STM32 to design the digital screen with directly mounted RGB interface.
微处理器通过控制接口、按照一定的控制时序实现对FS9704的控制。
Microprocessor via the control interface, according to some control timing sequence achieves control over FS9704.
合成器提供了由处理器进行监控响应的各种控制接口，包括半音接口、八度接口、定调接口。
The synthesizer is provided with various control interfaces which are monitored by the processor for response such as the semitone interface, octave interface and pitch interface.
同时，FS9704还具有微处理器接口，可以通过接口总线与微处理器进行连接，控制FS9704的动作。
Meanwhile, FS9704 has the microprocessor interface, and can connect with the microprocessor through interface bus to control FS9704 action.
硬件部分以针对嵌入式应用的S3C4510B微处理器作为主控制器，利用S3C4510B强大的网络功能和众多外设接口实现对现场设备的远程控制。
The hardware is based on S3C4510B as the main controller, which has powerful Internet function and many interfaces to remote control local equipment.
数字串行接口可配置用于三线式操作，并且与微控制器和数字信号处理器兼容。
The digital serial interface can be configured for three wire operation and is compatible with microcontrollers and digital signal processors.
输出数据通过串行或并行端口从输出寄存器中存取，这可实现与现代微控制器和数字信号处理器的轻松、高速接口。
The output data is accessed from the output register through a serial or parallel port. This offers easy, high speed interfacing to modern microcontrollers and digital signal processors.
同时，PSTN接口系统的控制是通过无线收发模块的基带处理器来控制的。
Simultaneously, a PSTN interface system is controlled by a baseband processor of a wireless receiving and transmitting module.
转换过程和数据采集过程均通过标准控制输入进行控制，使器件与微处理器和DSP可实现轻松接口。
The conversion process and data acquisition are controlled using standard control inputs that allow for easy interfacing to microprocessors and DSPs.
通过系统中控制接口模块接收主处理器发送的控制指令，屏蔽了不同主处理器之间的差异，增强了系统的可移植性。
The control interface module shields the various differences of the main processor, which improves the portability of the coprocessor system.
转换过程和数据采集过程均通过标准控制输入进行控制，使器件与微处理器和DSP可实现轻松接口。
The conversion process and data acquisition are controlled using standard control inputs that allow easy interfacing with microprocessors and DSPs.
按照模块化设计思路，将通信器的硬件电路分为电力线通信模块、微处理器控制模块和电源耦合模块，集中器比通信器多一个RS-232C接口模块。
Depending on the idea of modular design, the communicator is decomposed to PLC module, MCU module, power and coupling module, while the collector has one more module: RS-232C interface module.
按照模块化设计思路，将通信器的硬件电路分为电力线通信模块、微处理器控制模块和电源耦合模块，集中器比通信器多一个RS-232C接口模块。
Depending on the idea of modular design, the communicator is decomposed to PLC module, MCU module, power and coupling module, while the collector has one more module: RS-232C interface module.
应用推荐