通过对漆膜损坏原因分析及解决漆膜脱落方法研究，确定选用磷化底漆来弥补人工除锈的不足。
Through the analysis of the failure of paint coating and study of the techniques to prevent the coating from spalling, the phosphorus-based prime coating was selected to solve this problem.
作者通过对纤维微观组织的观察与分析，找出其损坏原因。
The causes for damage have been found after the observation and analysis of the fibre microstructure.
分析毛细管差压变送器损坏的原因，并提出解决措施，实施后效果显著。
Analyzes reason of damage of capillary differential pressure transmitter, puts forward solving measures to achieve outstanding result.
分析了皮带胶接头损坏的原因，研究制定了合理的皮带胶接工艺，取得了良好使用效果。
This treatise analyzes the causes of damage in belt glued ends, studies and works out rational belt glueing technics, showing fine results.
分析了高温烟道空气换热器损坏的原因，并对解决方案的优劣加以论述，确定了进一步改进的方向。
This paper analyzes the damage reasons of heat exchanger in high temperature flue and evaluates its solving methods. Further determines improving direction.
对环型套筒窑下拱桥受损现象进行了分析，提出了下拱桥损坏产生的原因和解决办法。
Analysis is conducted for the damage phenomenon at the lower arch of annular shaft kiln. The cause of damage and its solution are pointed out.
通过对各阶模态参数的分析，找出了水箱疲劳损坏的原因，并提出了进一步改进的意见。
By analysing individual parameter, the cause of fatigue damage of water tank was found out, the advice of improvement was put forward.
通过对已有植草砖停车场铺面系统的调查，对损坏原因进行分析，提出了改进的施工方法，可供类似工程参考。
Through the investigation of pavior system with grass-planting bricks of a parking garage, damage causes are analyzed and an improving construction method is provided in this paper for reference.
根据矿用截齿的损坏形式、使用寿命，分析其失效的原因，为寻求出提高矿用截齿性能的技术途径提供参考。
According to mining damage to pick the form of life, analyzing the reasons for its failure to find a mining pick to improve the performance of the technical means to provide a reference.
本文重点对柴油机轴瓦的工作特点及其损坏原因进行了分析，并阐述了故障轴瓦修配时应注意的事项。
This paper analyses the working principle of bearing insert and some cause of the damage, meanwhile, some points needing attention in repairing fault bearing insert are also given.
在实践经验的基础上，分析绕绳系统钢丝绳局部损坏的原因。
The causes for partial failure to the rope in reeving system of ship unloader are analysed.
分析了水冷壁管损坏的原因，提出了改进的措施。
This paper analyzes the damage reason of the water wall tube, and puts forward the improvement measures.
对精冲模芯的损坏形式及其原因进行综合分析。
This article analyzes the forms of the damages of Fine Die core and also the reasons comprehensively.
分析液环式压缩机机械密封损坏原因，提出改进措施。
Analyzed breakage causes of mechanical seal in liquid ring compressor, and introduced measures for improvement.
针对这种情况，分析了拆卸螺杆上螺纹发生损坏的原因，自行设计制作了新的拆卸套具及空心螺杆，取得了很好的效果。
Upon analysis of the screw thread damage on the dismantling screw, new dismounting kit and hollow screw have been designed and made by the plant independently a.
通过对我国焦炉寿命结构的统计，从事故性老化和正常性老化两方面分析了炼焦炉损坏的原因。
The damage cause has been discussed through the analysis on the normal and abnormal aging of the coke ovens based on the statistics of the coke oven life time in China.
在分析隔膜式计量泵隔膜片损坏原因的基础上，对该泵的补油系统进行了改进。
Some improvements of the slippage systems of the daiphragm meter pumps were made based on the damage causes of the daiphragm sheets.
该文对造成凝泵轴瓦损坏的原因进行了全面分析，并进行了低速改进，取得了显著效果。
The paper presents an allinclusive analysis of the bearing damage incurred by the condensate pump and reports on the effective speed reducing improvement.
本文通过对气化炉生产状况的分析，寻找烧嘴损坏的原因，并提出相应的措施。
The production of gasifier was analysed, and the broken reasons of burner was found out. The resolvent was put forward, too.
本文分析了辊环异常损坏的原因并提出了防范措施。
Various reasons resulting in damages of the rollers are discussed and some prevention measures are given.
通过对某砖混结构住宅楼开裂损坏的检测，计算分析了导致该住宅楼开裂的原因，提出了加固处理方法。
Based on the cracking inspection of a brick and concrete mixed structure building, the cracking reasons are analysed and strengthening method is presented.
文章分析了同步电动机频繁损坏的主要原因，提出了解决措施，以确保电机安全运转。
Frequent damage causes of synchronous motor are analyzed, the technical measure to guarantee the synchronous motor safe handling are put forward.
本文对煤矿井下生产运输设备所用电动机损坏的原因进行了分析，就如何预防电动机出现故障提出了几项措施。
The damage causes of the motor used on transporters in coal mine were analyzed and the preventive measures against the faults were put forward.
通过对一起风冷热泵机组压缩机损坏事故的分析，提出机组冬季损坏的主要原因，并提出一些意见和建议供用户和生产厂家参考。
Presents main reasons of the compressor damaged in winter by analyzing an accident of the wind cooling heat - pump unit. Gives some Suggestions for the user and the producer.
分析凉水塔风机减速箱齿轮损坏的主要原因，采取相应的防范措施。
The damage cause of reduction gear of cooling tower fan is analyzed, some countermeasures are adopted.
介绍了干气密封在压缩机上的使用及损坏过程，分析了干气密封的损坏原因，并提出了使用过程中的注意事项。
The dry gas seal of compressor is presented and the course of its failure was introduced. The cause was analyzed, and the measures we must take were brought forward.
针对压滤机滤板在东曲矿选煤厂使用中出现的损坏情况，分析了其原因并提出了一些改进措施。
This paper analyses the problem existing in the use of the plates of the pressure filter, and puts forward some suggestions on resolving these problems.
对国内外部分高压交联聚乙烯(XLPE)电缆系统的绝缘损坏作了统计，分析了电缆及其附件绝缘老化原因和形态，叙述了XLPE电缆绝缘老化的机理。
With the statistics on insulation damages of some HV XLPE cable systems at home and abroad, the causes, modes and mechanisms of insulation ageing of XLPE cables and their accessories are analyzed.
分析了Conform连续挤压工装件——腔体在生产工艺中损坏的原因及提高腔体使用寿命的措施。
The reason to be damaged in production for cavity die in CONFORM continuous extruder is analysed and measures to prolong its lifetime recommended.
分析了Conform连续挤压工装件——腔体在生产工艺中损坏的原因及提高腔体使用寿命的措施。
The reason to be damaged in production for cavity die in CONFORM continuous extruder is analysed and measures to prolong its lifetime recommended.
应用推荐