本文叙述应用回转器的振荡电路的原理与实践。
The principle and the practice of an oscillation circuit using a gyrator are discussed.
全部采用石英振荡电路，具有极高的频率稳定性能。
The pure quartz shake circuit with a high stable performance to the frequency.
目的 研制石英谐振组合靶基因检测仪自激式振荡电路。
Objective To construct an oscillation circuit for a gene analyzer based on quartz crystal microbalance.
采用高频振荡原理设计振荡电路，提高了稳定性和可靠性。
The design of high - frequence oscillate circuit can improve the reliability of character of operation and easy maintenance.
高频信号源包括振荡电路，阻抗匹配电路和功率放大电路。
The high frequency power supply involves the oscillator, the impedance matching and the power amplifier.
没有检测到的位置是通过一个定位磁铁，但通过一个感应振荡电路。
The position is not detected via a positioning magnet but via an inductive oscillating circuit.
阐述了该传感器的检测原理，同时介绍了探头和振荡电路的设计方法。
The measuring principal is given. Simultaneously, the detector of sensor and oscillator circuit is developed.
在时钟产生电路中，选择了RC振荡电路作为系统提供时钟源的方案。
In clock generating circuit, we choose rc oscillation circuit as clock scheme to supply system clock source.
当大量液体物质或接近这一领域的电容不平衡发生，导致了在振荡电路放大的变化。
When a substantial or fluid substance nears this field a capacitance unbalance occurs and leads to a variation of the amplification in the oscillating circuit.
研究了在给定参数时系统的复杂动力学行为，并设计实现了该混沌系统的振荡电路。
The complicated dynamic behavior is studied when the parameters are given, and the oscillator circuit of the chaotic system is designed.
简述并联振荡电路特点以及感应加热淬火用SCR 晶闸管中频电源调谐方法等。
This thesis sketchs out characteristics of parallel oscillatory circuit and tune means of KGPS applied in Induction quenching.
常见的晶体振荡电路一般由一只电阻、一个或多个逻辑门、一个晶体和两个电容器组成。
A popular design of quartz crystal oscillator USES a resistor, one or more logic gates, a quartz crystal and a couple of capacitors.
区别于现有的微欧仪，本设计采用由电容组成的二阶振荡电路做脉冲电源对开关进行放电。
In this thesis, switchgear test power is supplied by a pulse power, composed of a second order oscillating circuit including a capacitance.
本实用新型汽车无触点电子闪光器是由脉冲振荡电路、开关电路温度自动保护电路所组成。
The utility model relates to a non-contact electronic flash light for vehicles, which is composed of a pulse oscillating circuit, a switching circuit, a temperature automatic protection circuit.
分析了用运算放大器组成正弦波振荡电路的起振条件和输出电压幅值的调节及选频网络的构成。
This paper is involved in the analysis of oscillation starting condition, output voltage amplitude adjustment, and frequency selection network composition of sinusoidal coave oscillation circuit.
量子比特和存储器之间通过为我们称为共振器件的设备连接，振荡电路使量子比特的值能够保存一段短的时间。
The links between the qubits and the memory contain devices known as resonators, zigzagging circuits inside which a qubit's value can live on for a short time.
阿电容式接近开关工程高的振荡电路，产生的积极传感器表面磁场的电磁通过一个电容手段的频率。
A capacitive proximity switch works with a high frequency oscillating circuit that creates an electromagnetic field on the active sensor surface by means of a capacitor.
对水量的各种测量方法进行了比较分析，并详细叙述了无磁传感器利用LC振荡电路来测量水量的原理。
All kinds of flow measurements are analyzed, and the principle of the nonmagnetic sensor which USES LC oscillating circuit to measure water flow are discussed in detail.
电容式水分传感器以频率信号作为参变量，由电容探头、高频振荡电路、分频器和金属屏蔽盒构成一体。
Capacihve moisture sensor regards frequency signal as variability, it is made up of capacitive probe, high frequency surge circuit, dispart frequency instrument and metal shield box.
如果能适时地引入梯形电路的简单介绍，则rc移相式振荡电路的振荡频率及振荡条件可以容易地求出。
If we introduce the ladder-shaped circuit simple in good time, the oscillating frequency and oscillating condition of rc phase shift oscillating can be w.
如果能适时地引入梯形电路的简单介绍，则rc移相式振荡电路的振荡频率及振荡条件可以容易地求出。
If we introduce the ladder-shaped circuit simple in good time, the oscillating frequency and oscillating condition of rc phase shift oscillating can be worked out easily.
电容式水分传感器以频率信号作为参变量，由电容探头、高频振荡电路、分频器和金属屏蔽盒构成一体。
Capacihve meisture sensor regards frequency signal as variability, it is made up of capacitive probe, high frequency surge cirouit, dispart frequency instrument and metal shield box.
对影响放电电压大小及频率的电源参数进行了讨论，如供电电压、控制信号占空比、振荡电路的R和C等。
Some parameters affecting the frequency and magnitude of power supply, such as supply voltage, duty of control sigal. the R and C of oscillation circuit are discussed.
讨论了一些影响放电电压大小及频率的电源参数，如供电电压、控制信号占空比、振荡电路的电阻和电容等。
Some factors affecting the frequency and magnitude of power supply, such as supply voltage, duty of control signal, the resistance and capacitance of oscillation circuit are discussed.
并根据LC正弦振荡电路基本原理，设计刀具接触传感系统和刀具进给策略，实现对刀具的高精度自动定位。
According to the basic principle of LC oscillator, the cutter contact sensing system and locomotion strategy are designed to realize cutter location automatically.
完成了偏心传感器探头的设计并解决了偏心传感器振荡电路的电源供应问题和信号从旋转部件到静止部件的传输问题。
The probe of the eccentricity sensor is designed. The problems such as power supply needed by oscillating circuit and signal transmission from rotary part to stationary part are solved.
分析并设计了基于共振隧穿二极管的振荡电路、矢量水声传感器物理结构以及制作工艺，讨论了传感器信号处理方法。
The RTD oscillator, physical structures and fabrication process of vector hydrophone are designed, and the signal processing has been discussed.
分析并设计了基于共振隧穿二极管的振荡电路、矢量水声传感器物理结构以及制作工艺，讨论了传感器信号处理方法。
The RTD oscillator, physical structures and fabrication process of vector hydrophone are designed, and the signal processing has been discussed.
应用推荐